Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction(C) Produces high octane number gasoline(D) None of these

Higher pressure in the reforming reactor
(A) Increases coke formation
(B) Increases the rate of reaction
(C) Produces high octane number gasoline
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of light distillates (B) Suppress coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Description : Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of ... coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Last Answer : (B) Suppress coke formation

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Last Answer : (C) Reforming

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Description : The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Last Answer : (C) Straight run gasoline

Choose the correct statement. (A) Coking tendency increases with increasing molecular weight (B) Coking tendency decreases with increasing molecular weight (C) Higher pressure enhances coke formation (D) Coking is an exothermic reaction

Description : Choose the correct statement. (A) Coking tendency increases with increasing molecular weight (B) Coking tendency decreases with increasing molecular weight (C) Higher pressure enhances coke formation (D) Coking is an exothermic reaction

Last Answer : (A) Coking tendency increases with increasing molecular weigh

Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Description : Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Last Answer : ANSWER d. all of the above

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation(C) Reduce the pour point(D) Increase its octane numbe

Description : Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation (C) Reduce the pour point (D) Increase its octane numbe

Last Answer : (D) Increase its octane numbe

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol

In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Description : In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Last Answer : (C) Gasoline obtained has very high aromatic content

Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Description : Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas

Last Answer : (A) Iron-steam reaction

High rate of heating of coke ovens (A) May damage its walls due to abrupt excessive swelling of coal (B) Produces larger size coke (C) Increases the time of carbonisation (D) None of these

Description : High rate of heating of coke ovens (A) May damage its walls due to abrupt excessive swelling of coal (B) Produces larger size coke (C) Increases the time of carbonisation (D) None of these

Last Answer : (A) May damage its walls due to abrupt excessive swelling of coal

Is it true that higher octane gasoline is consumed more slowly by engines,and it doesn't pay to purchase regular gasoline solely to save $$ when it is not required for your vehicle?

Description : Is it true that higher octane gasoline is consumed more slowly by engines,and it doesn't pay to purchase regular gasoline solely to save $$ when it is not required for your vehicle?

Last Answer : No it is not true that premium gas burns slower than reg. It is a complete waste of money to use a higher grade than required by the manufacturer.

Do fuel efficient cars typically use higher octane gasoline?

Description : Do fuel efficient cars typically use higher octane gasoline?

Last Answer : No, higher octane fuel is only necessary for higher performance cars. Highly efficient cars can usually use the lowest octane fuels, because they are not designed for performance.

__________ determination is not a very significant and important test for gasoline. (A) Gum & sulphur content (B) Viscosity (C) Octane number (D) Reid vapor pressure

Description : __________ determination is not a very significant and important test for gasoline. (A) Gum & sulphur content (B) Viscosity (C) Octane number (D) Reid vapor pressure

Last Answer : (B) Viscosity

Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased severity of cracking (C) At low pressure, the yield of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Description : Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased ... of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Last Answer : (D) Greater depth of cracking gives lower octane number gasoline

Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene(C) Adsorb arsenic from feedstock to catalytic reforming(D) All (A), (B) & (C)

Description : Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene (C) Adsorb arsenic from feedstock to catalytic reforming (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Last Answer : (A) Naphtha or straight run gasoline

. Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)

Description : . Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

Which of the following processes is used for the production of petroleum coke? (A) Stabilisation (B) Visbreaking (C) Cracking (D) Reforming

Description : Which of the following processes is used for the production of petroleum coke? (A) Stabilisation (B) Visbreaking (C) Cracking (D) Reforming

Last Answer : (C) Cracking

Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking

Last Answer : (A) Electrolysis of water

Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)

Description : Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven gas(B) Steam reforming of naphtha(C) Cracking of natural gas(D) Electrolysis of water

Description : Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven ga (B) Steam reforming of naphtha (C) Cracking of natural gas (D) Electrolysis of water

Last Answer : (D) Electrolysis of water

Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Description : Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas

Last Answer : (C) Electrolysis of water

Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane number than straight chain paraffins with same number of carbon atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Description : Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane ... atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Last Answer : (A) Octane number of i-octane is zero

Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Description : Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Last Answer : (A) Resistance to knock

The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Description : The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Last Answer : (C) Gum forming tendency & thoroughness of refining

Phenols are added in gasoline to (A) Improve the octane number(B) Act as an antioxidant(C) Reduce its viscosity(D) Increase its pour point

Description : Phenols are added in gasoline to (A) Improve the octane number (B) Act as an antioxidant (C) Reduce its viscosity (D) Increase its pour point

Last Answer : (B) Act as an antioxidant

Octane number (unleaded) of reformed gasoline may be upto (A) 60 (B) 70 (C) 80 (D) 90

Description : Octane number (unleaded) of reformed gasoline may be upto (A) 60 (B) 70 (C) 80 (D) 90

Last Answer : (D) 90

The octane number of aviation gasoline may be (A) 79 (B) 87 (C) 97 (D) > 100

Description : The octane number of aviation gasoline may be (A) 79 (B) 87 (C) 97 (D) > 100

Last Answer : (D) > 100

Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Description : Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Last Answer : (B) Straight run gasoline

Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Description : Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Last Answer : (C) 70

The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Description : The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Last Answer : (A) 3

Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Description : Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Last Answer : (D) 97

Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Description : Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Last Answer : (A) Calorific value

The molecular structure of the straight-run gasoline is changed by a) reforming b) refining c) cracking d) boiling

Description : The molecular structure of the straight-run gasoline is changed by a) reforming b) refining c) cracking d) boiling

Last Answer : Answer: a Explanation: The molecular structure of the straight-run gasoline is changed by reforming and hydrocarbons are decomposed into smaller hydrocarbons by cracking.

Octane numbers of motor gasoline used in India and America are respectively (A) 87 & 94 (B) 94 & 87 (C) 94 & 100 (D) 83 & 100

Description : Octane numbers of motor gasoline used in India and America are respectively (A) 87 & 94 (B) 94 & 87 (C) 94 & 100 (D) 83 & 100

Last Answer : (A) 87 & 94

Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Description : Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Last Answer : (B) Presence of sulphur

Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Description : Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Last Answer : ANSWER : B

Gasoline with an octane number of 90 is equivalent in knocking characteristics to a mixture of heptane and isooctane of the following composition : (a) 20% heptane + 80% isooctane (b) 90% heptane + 10% isooctane (c) 80% heptane + 20% isooctane (d) 10% heptane + 90% isooctane

Description : Gasoline with an octane number of 90 is equivalent in knocking characteristics to a mixture of heptane and isooctane of the following composition : (a) 20% heptane + 80% isooctane (b) 90% heptane + 10% isooctane (c) 80% heptane + 20% isooctane (d) 10% heptane + 90% isooctane

Last Answer : 10% heptane + 90% isooctane

Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Description : Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Last Answer : Gasoline

Presence of sulphur in gasoline (A) Leads to corrosion (B) Increases lead susceptibility (C) Decreases gum formation (D) Helps during stabilisatio

Description : Presence of sulphur in gasoline (A) Leads to corrosion (B) Increases lead susceptibility (C) Decreases gum formation (D) Helps during stabilisatio

Last Answer : (A) Leads to corrosion

Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Description : Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Last Answer : (B) Endothermic

In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Description : In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Last Answer : (C) Temperature

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity