Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25

Water content in the crude oil as it comes out of oil well may be upto
__________ percent.
(A) 2
(B) 5
(C) 10
(D) 25
by

1 Answer

Answer :

(D) 25
by

Related questions

The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2

Last Answer : (B) 1-1.5

Salt content (measured as sodium chloride) in electrically desalted crude oil comes down to a level of about __________ ptb (pounds per thousand barrel). (A) 0.03 (B) 3 (C) 35 (D) 70

Description : Salt content (measured as sodium chloride) in electrically desalted crude oil comes down to a level of about __________ ptb (pounds per thousand barrel). (A) 0.03 (B) 3 (C) 35 (D) 70

Last Answer : (B) 3

A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Last Answer : (B) 10

A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Description : A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Last Answer : (A) 8

Naphtha yield in straight run distillation of crude oil may be about__________ percent.(A) 2(B) 6(C) 12(D) 18

Description : Naphtha yield in straight run distillation of crude oil may be about__________ percent. (A) 2 (B) 6 (C) 12 (D) 18

Last Answer : (B) 6

Natural gas recovered along with crude oil from oil wells is called wet natural gas which has a higher __________ compared to the dry natural gas. (A) Unsaturated hydrocarbon content (B) Calorific value (C) Quantity of propane (D) Quantity of butane

Description : Natural gas recovered along with crude oil from oil wells is called wet natural gas which has a higher __________ compared to the dry natural gas. (A) Unsaturated hydrocarbon content (B) Calorific value (C) Quantity of propane (D) Quantity of butane

Last Answer : (B) Calorific value

Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (C) 50

Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Description : Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Last Answer : (D) 85

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (B) 25

When Crude Oil Is Heated, Which Hydrocarbon Comes First?

Description : When Crude Oil Is Heated, Which Hydrocarbon Comes First?

Last Answer : Natural gas (Gasoline)… at 20 Celsius

Which of the following is used for pumping crude oil from oil well? (A) Single stage centrifugal pump (B) Gear pump (C) Screw pump (D) Duplex/triplex reciprocating pump

Description : Which of the following is used for pumping crude oil from oil well? (A) Single stage centrifugal pump (B) Gear pump (C) Screw pump (D) Duplex/triplex reciprocating pump

Last Answer : (D) Duplex/triplex reciprocating pump

In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Description : In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Last Answer : (A) Sulphur increases

Crude oil is sometimes termed sweet because it is – (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Description : Crude oil is sometimes termed sweet because it is – (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Last Answer : (2) mildly sweet due to low sulphur content Explanation: Crude oil is sometimes termed sweet amount of hydrogen sulphide and Carbon dioxide.

Crude oil is sometimes termed sweet because it is : (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Description : Crude oil is sometimes termed sweet because it is : (1) sweet in taste due to dissolved sugars (2) mildly sweet due to low sulphur content (3) less acidic (4) less alkaline

Last Answer : mildly sweet due to low sulphur content

An upper limit of oil content is limited to about __________ percent for achieving efficient and satisfactory level of wax sweating. (A) 5 (B) 15 (C) 40 (D) 60

Description : An upper limit of oil content is limited to about __________ percent for achieving efficient and satisfactory level of wax sweating. (A) 5 (B) 15 (C) 40 (D) 60

Last Answer : (C) 40

Volatile matter content of metallurgical coke may be around __________ percent. (A) 1-2 (B) 10-15 (C) 22-26 (D) 30-33

Description : Volatile matter content of metallurgical coke may be around __________ percent. (A) 1-2 (B) 10-15 (C) 22-26 (D) 30-33

Last Answer : (A) 1-2

Alcohol content in freshly prepared natural and fortified **** may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Description : Alcohol content in freshly prepared natural and fortified wine may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Last Answer : (A) 7-14 and 14-30

During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Description : During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Last Answer : (B) Increases

Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Description : Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Last Answer : (B) 3

Crude oils containing more than __________ kg of total salts (expressed in terms of NaCl) per thousand barrel is called a 'salty crude'. (A) 1 (B) 5 (C) 15 (D) 25

Description : Crude oils containing more than __________ kg of total salts (expressed in terms of NaCl) per thousand barrel is called a 'salty crude'. (A) 1 (B) 5 (C) 15 (D) 25

Last Answer : (B) 5

Hydrogen percentage (by weight) in crude petroleum may be about (A) 5 (B) 15 (C) 25 (D) 35

Description : Hydrogen percentage (by weight) in crude petroleum may be about (A) 5 (B) 15 (C) 25 (D) 35

Last Answer : (B) 15

Furnace oil consumption in a furnace for a given duty employing preheated combination air (at 300°) may be reduced by about __________ percent as compared to the use of atmospheric combustion air. (A) 5 (B) 10 (C) 20 (D) 35

Description : Furnace oil consumption in a furnace for a given duty employing preheated combination air (at 300°) may be reduced by about __________ percent as compared to the use of atmospheric combustion air. (A) 5 (B) 10 (C) 20 (D) 35

Last Answer : (C) 20

Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Description : Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base

Last Answer : (C) Asphaltic

Crude petroleum oil is a __________ fuel. (A) Primary (B) Fossil (C) Both (A) & (B) (D) Secondary

Description : Crude petroleum oil is a __________ fuel. (A) Primary (B) Fossil (C) Both (A) & (B) (D) Secondary

Last Answer : (C) Both (A) & (B)

Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Description : Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Last Answer : (B) Centrifugal

Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Description : Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed

Last Answer : (B) Naphthenic

__________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Description : __________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic

Last Answer : (B) Naphthenic

Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) Oleophobic

The best method of determining sulphur in crude oil is by the __________ method. (A) Kjeldahl (B) Dumas (C) Bomb calorimeter (D) Junkers calorimeter

Description : The best method of determining sulphur in crude oil is by the __________ method. (A) Kjeldahl (B) Dumas (C) Bomb calorimeter (D) Junkers calorimeter

Last Answer : (C) Bomb calorimeter

Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Last Answer : (A) 80-170

Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Last Answer : (B) 35 to 45

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

In what sequence are the following obtained from a natural gas well? 1. Natural Gas 2. Water 3. Crude oil Codes: (a) 1, 3, 2 (b) 1, 2, 3 (c) 3, 2, 1 (d) 2, 1, 3

Description : In what sequence are the following obtained from a natural gas well? 1. Natural Gas 2. Water 3. Crude oil Codes: (a) 1, 3, 2 (b) 1, 2, 3 (c) 3, 2, 1 (d) 2, 1, 3

Last Answer : Ans:(a)

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52

Description : Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52

Last Answer : (D) 52

Maximum thermal efficiency of boiler may be about __________ percent. (A) 10 (B) 25 (C) 65 (D) 90

Description : Maximum thermal efficiency of boiler may be about __________ percent. (A) 10 (B) 25 (C) 65 (D) 90

Last Answer : (D) 90

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Volatile matter content in coking coal may be about __________ percent. (A) 1 (B) 7 (C) 22 (D) 46

Description : Volatile matter content in coking coal may be about __________ percent. (A) 1 (B) 7 (C) 22 (D) 46

Last Answer : (C) 22

Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (D) 24

Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95(D) 80

Description : Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95 (D) 80

Last Answer : (C) 95

The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300

Description : The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300

Last Answer : (B) 1 and 200

Actual operating speed of a ball mill may vary from 65 to 80% of the critical speed. Which of the following duties would require the ball mill to be operated at maximum percentage of critical speed? (A) Wet grinding in low viscous suspension (B) Wet grinding in high viscous suspension (C) Dry grinding of large particles (upto 1.25 cms) (D) Dry grinding of large particles in un-baffed mills

Description : Actual operating speed of a ball mill may vary from 65 to 80% of the critical speed. Which of the following duties would require the ball mill to be operated at maximum percentage of critical speed? (A) ... of large particles (upto 1.25 cms) (D) Dry grinding of large particles in un-baffed mills

Last Answer : (D) Dry grinding of large particles in un-baffed mills

Solid content in most of the domestic sewage is about __________ percent. (A) 0.001 (B) 0.1 (C) 5 (D) 10

Description : Solid content in most of the domestic sewage is about __________ percent. (A) 0.001 (B) 0.1 (C) 5 (D) 10

Last Answer : (B) 0.1

Sugar content in sugarcane on cane basis is about __________ percent by weight. (A) 1 to 5 (B) 5 to 10 (C) 15 to 20 (D) 20 to 30

Description : Sugar content in sugarcane on cane basis is about __________ percent by weight. (A) 1 to 5 (B) 5 to 10 (C) 15 to 20 (D) 20 to 30

Last Answer : (B) 5 to 10

Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Last Answer : (B) 0.2 to 0.4

Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Description : Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Last Answer : (B) 30-80

Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Description : Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Last Answer : (C) 50

The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Last Answer : (A) 3 to 4

Nitrogen content of urea is about __________ percent. (A) 10 (B) 46 (C) 80 (D) 94

Description : Nitrogen content of urea is about __________ percent. (A) 10 (B) 46 (C) 80 (D) 94

Last Answer : (B) 46