Vacuum maintained in the vacuum distillation tower of the crude distillation plant is about __________ mm Hg (absolute). (A) 5-10 (B) 30-80 (C) 150-250 (D) 350-400

Vacuum maintained in the vacuum distillation tower of the crude
distillation plant is about __________ mm Hg (absolute).
(A) 5-10
(B) 30-80
(C) 150-250
(D) 350-400
by

1 Answer

Answer :

(B) 30-80
by

Related questions

Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Description : Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Last Answer : (B) 30 to 80

The vacuum maintained in vacuum distillation unit for reduced crude is about __________ mm Hg. (A) 1.2 (B) 12 (C) 120 (D) 700

Description : The vacuum maintained in vacuum distillation unit for reduced crude is about __________ mm Hg. (A) 1.2 (B) 12 (C) 120 (D) 700

Last Answer : (C) 120

Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Description : Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Last Answer : (B) 3

Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Last Answer : (A) 80-170

In the layout plan for a vacuum distillation unit, operating at 60 mm Hg, supported by a barometric condenser, the appropriate place for the location of vacuum drum for collecting the distillate will be (A) At ground level (B) 2 metres above the ground (C) 5 metres above ground (D) 10 metres above ground

Description : In the layout plan for a vacuum distillation unit, operating at 60 mm Hg, supported by a barometric condenser, the appropriate place for the location of vacuum drum for collecting the distillate will be ... metres above the ground (C) 5 metres above ground (D) 10 metres above ground

Last Answer : (A) At ground level

Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Description : Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Last Answer : (C) 0.01

Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration. b) 10-15 mm Hg water pressure. A measure of 10–15 mm Hg water pressure would indicate that the cuff is underinflated. c) 30-35 mm Hg water pressure. A measure of 30–35 mm Hg water pressure would indicate that the cuff is overinflated. d) 0-5 mm Hg water pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Description : Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the ... pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Last Answer : a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration.

Normal blood pressure of man is – (1) 80/120 mm Hg (2) 90/140 mm Hg (3) 120/160 mm Hg (4) 85/150 mm Hg

Description : Normal blood pressure of man is – (1) 80/120 mm Hg (2) 90/140 mm Hg (3) 120/160 mm Hg (4) 85/150 mm Hg

Last Answer : (1) 80/120 mm Hg Explanation: Normal blood pressure is considered to be at or below 120 over 80 (120/80).

The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300

Description : The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300

Last Answer : (B) 1 and 200

Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300

Last Answer : (C) 350-400

Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Last Answer : (D) 250-280

Root formation is promoted in softwood cuttings under light intensity of __________ foot candles: a. 100-150 b. 150-200 c. 200-250 d. 250-350

Description : Root formation is promoted in softwood cuttings under light intensity of __________ foot candles: a. 100-150 b. 150-200 c. 200-250 d. 250-350

Last Answer : 150-200

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

The terminology used for the bottom most product from the vacuum crude distillation unit is (A) Residual crude (B) Residuum (C) Reduced crude (D) Petrolatum

Description : The terminology used for the bottom most product from the vacuum crude distillation unit is (A) Residual crude (B) Residuum (C) Reduced crude (D) Petrolatum

Last Answer : (B) Residuum

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

A solid shaft has diameter 80 mm. It is subjected to a torque of 4 KNm. The maximum shear stress induced in the shaft would be (a) 75/p N/mm2 (b) 250/p N/mm2 (c) 125/p N/mm2 (d) 150/p N/mm2

Description : A solid shaft has diameter 80 mm. It is subjected to a torque of 4 KNm. The maximum shear stress induced in the shaft would be (a) 75/p N/mm2 (b) 250/p N/mm2 (c) 125/p N/mm2 (d) 150/p N/mm2

Last Answer : (c) 125/p N/mm2

Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C.(A) 0.0001(B) 0.001(C) 0.01(D) 0.1

Description : Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C. (A) 0.0001 (B) 0.001 (C) 0.01 (D) 0.1

Last Answer : (B) 0.001

Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Description : Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Last Answer : (A) 25°C, 2 atm

What is the electric field intensity at a distance of 20cm from a charge 2 X 10 -6 C in vacuum? a) 250,000 b) 350,000 c) 450,000 d) 550,000

Description : What is the electric field intensity at a distance of 20cm from a charge 2 X 10 -6 C in vacuum? a) 250,000 b) 350,000 c) 450,000 d) 550,000

Last Answer : c) 450,000

90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Last Answer : (C) 250-280

. Molecular weight of petrol may be about (A) 40-60 (B) 100-130 (C) 250-300 (D) 350-400

Description : . Molecular weight of petrol may be about (A) 40-60 (B) 100-130 (C) 250-300 (D) 350-400

Last Answer : (B) 100-130

90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30(C) 250-280 (D) 500-600

Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30 (C) 250-280 (D) 500-600

Last Answer : (B) 10-30

Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900

Description : Conversion of yellow phosphorous to red phosphorous is done by heating it in covered retorts at __________ °C in absence of air. (A) 50-80 (B) 250-400 (C) 1000-1200 (D) 800-900

Last Answer : (B) 250-400

A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Last Answer : (B) 10

True statements about cerebral blood flow: a. it is controlled mainly by the autonomic nervous system b. cerebral arterioles constricts when the blood pressure is raised c. it is constant in the blood pressure range of 50 to 150 mm Hg systolic d. hypocapnia increases the cerebral blood flow

Description : True statements about cerebral blood flow: a. it is controlled mainly by the autonomic nervous system b. cerebral arterioles constricts when the blood pressure is raised c. it is constant in the blood pressure range of 50 to 150 mm Hg systolic d. hypocapnia increases the cerebral blood flow

Last Answer : it is constant in the blood pressure range of 50 to 150 mm Hg systolic

A woman in the 28th week of pregnancy has developed pregnancy induced hypertension with a blood pressure reading of 150/100 mm Hg. Select the most appropriate antihypertensive drug for her: A. Furosemide B. Methyldopa C. Propranolol D. Captopril

Description : A woman in the 28th week of pregnancy has developed pregnancy induced hypertension with a blood pressure reading of 150/100 mm Hg. Select the most appropriate antihypertensive drug for her: A. Furosemide B. Methyldopa C. Propranolol D. Captopril

Last Answer : B. Methyldopa

During the night when the F2 layer combines with F1 layer it falls to what approximate height? A. 250 km B. 350 km C. 300 km D. 400 km

Description : During the night when the F2 layer combines with F1 layer it falls to what approximate height? A. 250 km B. 350 km C. 300 km D. 400 km

Last Answer : C. 300 km

India is unique in its characteristics,where over different crops are cultivated in region a) 400. c) 350 b)250 d) 300

Description : India is unique in its characteristics,where over different crops are cultivated in region a) 400. c) 350 b)250 d) 300

Last Answer : 250 

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

The time taken by Sun to revolve around the center of our galaxy is------? A. 150 million years B. 250 million years (Answer) C. 300 millon years D. 350 millon years

Description : The time taken by Sun to revolve around the center of our galaxy is------? A. 150 million years B. 250 million years (Answer) C. 300 millon years D. 350 millon years

Last Answer : B. 250 million years (Answer)

The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Description : The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Last Answer : Answer: Option D

What is the recommended minimum range of illumination required by BS EN 970 for inspection of a welded surface? a) 90 to 125 lux b) 150 to 250 lux c) 350 to 500 lux d) 35 to 50 lux

Description : What is the recommended minimum range of illumination required by BS EN 970 for inspection of a welded surface? a) 90 to 125 lux b) 150 to 250 lux c) 350 to 500 lux d) 35 to 50 lux

Last Answer : c) 350 to 500 lux

Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Description : Exothermic condensation reaction of monochlorobenzene with chloral in presence of 20% oleum as catalyst produces DDT. The reaction temperature is maintained at __________ °C. (A) 15-30 (B) 90-100 (C) 250-300 (D) < 0

Last Answer : (A) 15-30

According to IS: 456-2000 Maximum spacing of shear reinforcement in no case shall not exceed [ A ] 250 mm [ B ] 300 mm [ C ] 350 mm [ D ] 450 mm

Description : According to IS: 456-2000 Maximum spacing of shear reinforcement in no case shall not exceed [ A ] 250 mm [ B ] 300 mm [ C ] 350 mm [ D ] 450 mm

Last Answer : [ B ] 300 mm

Minimum depth of ballast cushion below the bottom of sleeper at the rail seat on BG group A route should be :- (a) 350 mm. (b) 250 mm. (c) 300 mm.* (d) 325 mm.

Description : Minimum depth of ballast cushion below the bottom of sleeper at the rail seat on BG group A route should be :- (a) 350 mm. (b) 250 mm. (c) 300 mm.* (d) 325 mm.

Last Answer : (c) 300 mm.*

37. Euro –II norm stipulate ‘sulphur’ level in diesel and petrol to be ... e) 400 ppm in diesel and 150 ppm in petrol. f) 350 ppm in diesel and 180 ppm in petrol. g) 100 ppm in diesel and 50 ppm in petrol. h) 350 ppm in diesel and 150 ppm in petrol.

Description : 37. Euro –II norm stipulate ‘sulphur’ level in diesel and petrol to be ... e) 400 ppm in diesel and 150 ppm in petrol. f) 350 ppm in diesel and 180 ppm in petrol. g) 100 ppm in diesel and 50 ppm in petrol. h) 350 ppm in diesel and 150 ppm in petrol.

Last Answer : h) 350 ppm in diesel and 150 ppm in petrol.

17. Euro –II norm stipulate ‘sulphur’ level in diesel and petrol to be ... a) 400 ppm in diesel and 150 ppm in petrol. b) 350 ppm in diesel and 180 ppm in petrol. c) 100 ppm in diesel and 50 ppm in petrol. d) 350 ppm in diesel and 150 ppm in petrol.

Description : 17. Euro –II norm stipulate ‘sulphur’ level in diesel and petrol to be ... a) 400 ppm in diesel and 150 ppm in petrol. b) 350 ppm in diesel and 180 ppm in petrol. c) 100 ppm in diesel and 50 ppm in petrol. d) 350 ppm in diesel and 150 ppm in petrol.

Last Answer : d) 350 ppm in diesel and 150 ppm in petrol.

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

An 18-year-old man shot once in the left chest has a blood pressure of 80/50 mm. Hg, a heart rate of 130 beats per minute, and distended neck veins. Immediate treatment might include: A. Administration of one liter of Ringer's lactate solution. B. Subxiphoid pericardiotomy. C. Needle decompression of the left chest in the second intercostal space. D. Emergency thoracotomy to cross-clamp the aorta.

Description : An 18-year-old man shot once in the left chest has a blood pressure of 80/50 mm. Hg, a heart rate of 130 beats per minute, and distended neck veins. Immediate treatment might include: A. ... of the left chest in the second intercostal space. D. Emergency thoracotomy to cross-clamp the aorta.

Last Answer : Answer: AC DISCUSSION: The finding of distended neck veins in conjunction with hypotension should suggest tension pneumothorax or pericardial tamponade. Absent ipsilateral breath sounds and a trachea ... injuries. There is no role for aortic cross-clamping in this scenario of cardiogenic shock

Normal blood pressure reading of an adult human : (1) 80/120 mm Hg (2) 120/80 mm Hg (3) 130/90 mm Hg (4) 160/95 mm Hg

Description : Normal blood pressure reading of an adult human : (1) 80/120 mm Hg (2) 120/80 mm Hg (3) 130/90 mm Hg (4) 160/95 mm Hg

Last Answer : (2) 120/80 mm Hg Explanation: According to the American Heart Association (AHA), normal blood pressure is a systolic pressure of less than 120 millimeters of mercury (mm Hg) and a diastolic ... . Having a blood pressure greater than 140/ 90 mm Hg is considered high blood pressure or hypertension.

Normal blood pressure of man is - (1) 80/120 mm (2) 90/140 mm Hg (3) 120/160 mm Hg (4) 85/120 mm Hg

Description : Normal blood pressure of man is - (1) 80/120 mm (2) 90/140 mm Hg (3) 120/160 mm Hg (4) 85/120 mm Hg

Last Answer : (1) 80/120 mm Explanation: Normal blood pressure is considered to be at or below 120 over 80 (120/80). Normally, blood pressures are usually categorized into three groups: low (90/60 or*lower), high ( 140 / 90 or higher), and normal (values above 90/60 and below 130/80).

An adult human with average health has systolic and diastolic pressures as (a) 120 mm Hg and 80 mm Hg (b) 50 mm Hg and 80 mm Hg (c) 80 mm Hg and 80 mm Hg (d) 70 mm Hg and 120 mm Hg.

Description : An adult human with average health has systolic and diastolic pressures as (a) 120 mm Hg and 80 mm Hg (b) 50 mm Hg and 80 mm Hg (c) 80 mm Hg and 80 mm Hg (d) 70 mm Hg and 120 mm Hg.

Last Answer : (a) 120 mm Hg and 80 mm Hg

Normal blood pressure reading of an adult human : (1) 80/120 mm Hg (2) 120/80 mm Hg (3) 130/90 mm Hg (4) 160/95 mm Hg

Description : Normal blood pressure reading of an adult human : (1) 80/120 mm Hg (2) 120/80 mm Hg (3) 130/90 mm Hg (4) 160/95 mm Hg

Last Answer :  120/80 mm Hg

Normal blood pressure of man is (1) 80/120 mm Hg (2) 90/140 mm Hg (3) 120/160 mm Hg (4) 85/120 mm Hg

Description : Normal blood pressure of man is (1) 80/120 mm Hg (2) 90/140 mm Hg (3) 120/160 mm Hg (4) 85/120 mm Hg

Last Answer : 80/120 mm Hg

A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Description : A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Last Answer : (A) 10-15

Maximum root zone depth for Maize (a) 200-300 mm (b) 400-600 mm (c) 500-600 mm (d) 350- 450 mm

Description : Maximum root zone depth for Maize (a) 200-300 mm (b) 400-600 mm (c) 500-600 mm (d) 350- 450 mm

Last Answer : (b) 400-600 mm

Sum of tread and rise must lie between (A) 300 to 350 mm (B) 400 to 450 mm (C) 500 to 550 mm (D) 600 to 650 mm

Description : Sum of tread and rise must lie between (A) 300 to 350 mm (B) 400 to 450 mm (C) 500 to 550 mm (D) 600 to 650 mm

Last Answer : Answer: Option B

In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Description : In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Last Answer : (A) Sulphur increases