Nitrogen content of urea is about __________ percent. (A) 10 (B) 46 (C) 80 (D) 94

Nitrogen content of urea is about __________ percent.
(A) 10
(B) 46
(C) 80
(D) 94
by

1 Answer

Answer :

(B) 46
by

Related questions

Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55(C) 80 (D) 94

Description : Carbon content of pitch (residue of coal tar distillation) is around __________ percent. (A) 70 (B) 55 (C) 80 (D) 94

Last Answer : (D) 94

Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (B) 25

Volatile matter content in coking coal may be about __________ percent. (A) 1 (B) 7 (C) 22 (D) 46

Description : Volatile matter content in coking coal may be about __________ percent. (A) 1 (B) 7 (C) 22 (D) 46

Last Answer : (C) 22

Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (C) 50

Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Presence of nitrogen in high concentration in contaminated air reduces partial pressure of oxygen in lungs, thereby causing asphyxia (suffocation) leading to death from oxygen deficiency. Concentration of N2 in contaminated air at which it acts as a natural asphyxiate is ≥ __________ percent. (A) 84 (B) 88 (C) 80 (D) 92

Description : Presence of nitrogen in high concentration in contaminated air reduces partial pressure of oxygen in lungs, thereby causing asphyxia (suffocation) leading to death from oxygen deficiency. Concentration of N2 in contaminated air at ... asphyxiate is ≥ __________ percent. (A) 84 (B) 88 (C) 80 (D) 92

Last Answer : (A) 84

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95(D) 80

Description : Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95 (D) 80

Last Answer : (C) 95

285. Sucrose content in the raw juice extracted from sugar cane is about __________ percent(A) 1 - 2 (B) 15 - 20 (C) 50 - 60 (D) 80 - 85

Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85

Last Answer : (B) 15 - 20

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

The percentage of Nitrogen (N) in DAP is...... (A) 46 (B) 26 (C) 18 (D) 80 (E) 30

Description : The percentage of Nitrogen (N) in DAP is...... (A) 46 (B) 26 (C) 18 (D) 80 (E) 30

Last Answer : (E) 30

The percentage of Nitrogen (N) in DAP is...... (A) 46 (B) 26 (C) 18 (D) 80 (E) 30

Description : The percentage of Nitrogen (N) in DAP is...... (A) 46 (B) 26 (C) 18 (D) 80 (E) 30

Last Answer : (C) 18

150. Nitrogen content in ammonium sulphate (a fertiliser) is around __________ percent. (A) 5 (B) 20 (C) 50 (D) 65

Description : 150. Nitrogen content in ammonium sulphate (a fertiliser) is around __________ percent. (A) 5 (B) 20 (C) 50 (D) 65

Last Answer : (B) 20

Solve for x. 129+(7x-46)+(9x-11)+94+(5x+17)?

Description : Solve for x. 129+(7x-46)+(9x-11)+94+(5x+17)?

Last Answer : 42069

. Urea is a better fertilizer than ammonium sulphate, because (A) It is cheaper (B) Nitrogen content is higher (C) It is not poisonous (D) It is easy to manufacture

Description : . Urea is a better fertilizer than ammonium sulphate, because (A) It is cheaper (B) Nitrogen content is higher (C) It is not poisonous (D) It is easy to manufacture

Last Answer : (B) Nitrogen content is higher

Nitrogen content of a nitrogenous fertiliser is 35%. It could be (A) Urea (B) Ammonium nitrate (C) Calcium ammonium nitrate (CAN) (D) Ammonium sulphate

Description : Nitrogen content of a nitrogenous fertiliser is 35%. It could be (A) Urea (B) Ammonium nitrate (C) Calcium ammonium nitrate (CAN) (D) Ammonium sulphate

Last Answer : (B) Ammonium nitrate

Fertiliser having high nitrogen content is – (1) Urea (2) Ammonium sulphate (3) Ammonium nitrate (4) Calcium citrate

Description : Fertiliser having high nitrogen content is – (1) Urea (2) Ammonium sulphate (3) Ammonium nitrate (4) Calcium citrate

Last Answer : (3) Ammonium nitrate Explanation: A growth fertilizer will have a high N content and relatively low P and K content. Ammonium nitrate is the highest Nitrogen fertilizer you can buy, and it is ... formulations of growth fertilizers will contain 5, 6 or even 7 times more Nitrogen than anything else.

Fertiliser having high nitrogen content is : (1) Urea (2) Ammonium sulphate (3) Ammonium nitrate (4) Calcium citrate

Description : Fertiliser having high nitrogen content is : (1) Urea (2) Ammonium sulphate (3) Ammonium nitrate (4) Calcium citrate

Last Answer : Ammonium nitrate

A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Description : A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Last Answer : (A) 10-15

Ringelmann chart No. 2 corresponds to __________ percent black smoke. (A) 10 (B) 20 (C) 40 (D) 80

Description : Ringelmann chart No. 2 corresponds to __________ percent black smoke. (A) 10 (B) 20 (C) 40 (D) 80

Last Answer : (C) 40

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Description : It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The ... 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Last Answer : (C) 71 min

In the reaction, C + O2 → CO2; ΔH = - 94 kcal. What is the heat content (enthalpy) of O2? (A) -94 kcal (B) > -94 kcal (C) < - 94 kcal (D) Zero

Description : In the reaction, C + O2 → CO2; ΔH = - 94 kcal. What is the heat content (enthalpy) of O2? (A) -94 kcal (B) > -94 kcal (C) < - 94 kcal (D) Zero

Last Answer : (D) Zero

Biological value of egg proteins is about (A) 70 % (B) 80 % (C) 86 % (D) 94 %

Description : Biological value of egg proteins is about (A) 70 % (B) 80 % (C) 86 % (D) 94 %

Last Answer : Answer : D

When sale is Rs. 4,80,000, gross loss is 25% on cost, purchase is Rs. 3,50,000 and closing stock is Rs. 60,000, the stock in the beginning would be– (A) Rs. 70,000 (B) Rs. 94,000 (C) Rs. 1,34,000 (D) Rs. 3,50,000

Description : When sale is Rs. 4,80,000, gross loss is 25% on cost, purchase is Rs. 3,50,000 and closing stock is Rs. 60,000, the stock in the beginning would be– (A) Rs. 70,000 (B) Rs. 94,000 (C) Rs. 1,34,000 (D) Rs. 3,50,000

Last Answer : Answer: Rs. 3,50,000

An investor invested Rs. 5 lakhs in Company Q in 1996. After one year, the entire amount along with the interest was transferred as investment to Company P in 1997 for one year. What amount will be received from Company P, by the investor? A. Rs. 5, 94,550 B. Rs. 5, 80,425 C. Rs. 5, 77,800 D. Rs. 5, 77,500 E. None of these

Description : An investor invested Rs. 5 lakhs in Company Q in 1996. After one year, the entire amount along with the interest was transferred as investment to Company P in 1997 for one year. What amount will be received from Company P, by ... . 5, 80,425 C. Rs. 5, 77,800 D. Rs. 5, 77,500 E. None of these

Last Answer : B. Rs. 5, 80,425

Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Description : Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Last Answer : (C) 50

Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25

Description : Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25

Last Answer : (D) 25

The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Last Answer : (A) 3 to 4

Volatile matter content of metallurgical coke may be around __________ percent. (A) 1-2 (B) 10-15 (C) 22-26 (D) 30-33

Description : Volatile matter content of metallurgical coke may be around __________ percent. (A) 1-2 (B) 10-15 (C) 22-26 (D) 30-33

Last Answer : (A) 1-2

Solid content in most of the domestic sewage is about __________ percent. (A) 0.001 (B) 0.1 (C) 5 (D) 10

Description : Solid content in most of the domestic sewage is about __________ percent. (A) 0.001 (B) 0.1 (C) 5 (D) 10

Last Answer : (B) 0.1

Alcohol content in freshly prepared natural and fortified **** may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Description : Alcohol content in freshly prepared natural and fortified wine may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Last Answer : (A) 7-14 and 14-30

Sugar content in sugarcane on cane basis is about __________ percent by weight. (A) 1 to 5 (B) 5 to 10 (C) 15 to 20 (D) 20 to 30

Description : Sugar content in sugarcane on cane basis is about __________ percent by weight. (A) 1 to 5 (B) 5 to 10 (C) 15 to 20 (D) 20 to 30

Last Answer : (B) 5 to 10

Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Last Answer : (B) 0.2 to 0.4

Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Description : Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Last Answer : (A) 1-5

Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Description : Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Last Answer : (B) 40

Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Last Answer : (D) 80

Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Description : Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Last Answer : (B) 20

Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Description : Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Last Answer : (A) 80 and 97

Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80

Description : Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80

Last Answer : (D) 80

Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Description : Conversion of SO2 to SO3 in Monsanto 4-pass converter is about __________ percent. (A) 80 (B) 90 (C) 98 (D) 100

Last Answer : (C) 98

. Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Description : . Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Last Answer : Option B

The percentage of Nitrogen in Air is - (1) 0.94 (2) 0.03 (3) 78.03 (4) 85.02

Description : The percentage of Nitrogen in Air is - (1) 0.94 (2) 0.03 (3) 78.03 (4) 85.02

Last Answer : (3) 78.03 Explanation: By volume, thy air contains 78.09% nitrogen, 20.95% oxygen, 0.93% argon, 0.039% carbon dioxide, and small amounts of other gases. Air also contains a variable amount of water vapor, on average around 1%.

If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Description : If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Last Answer : Answer: Option D

A contract is to be completed in 46 days and 117 men were set to work, each working 8 hours a day. After 33 days, 4/7 of the work completed. How many additional men may be employed so that the work may be completed in time, each man now working 9 hours a day? a) 79 b) 80 c) 81 d) 82 e) 83

Description : A contract is to be completed in 46 days and 117 men were set to work, each working 8 hours a day. After 33 days, 4/7 of the work completed. How many additional men may be employed so that the work may be completed in time, each man now working 9 hours a day? a) 79 b) 80 c) 81 d) 82 e) 83

Last Answer : work finished by 33 days = 33 117 8 = 30888 man hours 4/7th of the job is finished. remaining work = 1-(4/7) = 3/7 if 4/7th of the work is 30888 hours, then 3/7th of the work = [30888 ... 9 number of men = 198 since, 117 men are already working, additional men required = 198 - 117 = 81 Answer: c)

V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Description : V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Last Answer : Ans: R=40 ohm, L=33.3 micro farads

.Kamya purchased an item for Rs 46,000 and sold it at a loss of 12 per cent. With that amount she purchased another item which he sold at a gain of 12%. What was her overall gain/loss? 1. Loss of Rs 662.40 2. Profit of Rs 662.40 3. Loss of Rs 642.80 4. Profit of Rs 642.80

Description : .Kamya purchased an item for Rs 46,000 and sold it at a loss of 12 per cent. With that amount she purchased another item which he sold at a gain of 12%. What was her overall gain/loss? 1. Loss of Rs 662.40 2. Profit of Rs 662.40 3. Loss of Rs 642.80 4. Profit of Rs 642.80

Last Answer : 2. Profit of Rs 662.40

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98