Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid

Plasticisers are high boiling liquids added to plastic polymers to impart
toughness and flexibility at ordinary temperature. Which of the following is
not a plasticiser?
(A) Ethylene glycol
(B) Stearic acid estors
(C) Tricresyl phosphate
(D) Esters of phthalic acid
by

1 Answer

Answer :

(A) Ethylene glycol
by

Related questions

Plasticisers are added to polymers to improve their (A) Tensile strength (B) Softness & flexibility (C) Acid resistance (D) Alkali resistance

Description : Plasticisers are added to polymers to improve their (A) Tensile strength (B) Softness & flexibility (C) Acid resistance (D) Alkali resistance

Last Answer : (B) Softness & flexibility

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication(C) Develop new improved properties not present in the original resin(D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resin (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Description : Plasticisers are added to synthetic plastics to (A) Impart flexibility (B) Improve workability during fabrication (C) Develop new improved properties not present in the original resins (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Phosphates (e.g., tricresyl, tributyl, tetrabutyl, triphenyl etc.) are addedto polymers to act as(A) Hardeners(B) Anti-shrinkage agents(C) Plasticisers(D) Transparency improver

Description : Phosphates (e.g., tricresyl, tributyl, tetrabutyl, triphenyl etc.) are addedto polymers to act as (A) Hardeners (B) Anti-shrinkage agents (C) Plasticisers (D) Transparency improver

Last Answer : (C) Plasticisers

Pick out the correct combination about the role of various additives used in polymers. (A) Plasticiser: increases the polymer strength (B) Heat stabiliser: increases the maximum service temperature (C) Fillers: Does not affect the property of polymer but increases its weight (D) Lubricants: increases the flexibility of polymers

Description : Pick out the correct combination about the role of various additives used in polymers. (A) Plasticiser: increases the polymer strength (B) Heat stabiliser: increases the maximum service ... property of polymer but increases its weight (D) Lubricants: increases the flexibility of polymers

Last Answer : Option C

Addition of plasticisers to polymers results in partial neutralisation of intermolecular forces of attraction between the macro-molecules thereby increasing its (A) Tensile strength (B) Chemical resistance (C) Flexibility (D) All (A), (B) & (C)

Description : Addition of plasticisers to polymers results in partial neutralisation of intermolecular forces of attraction between the macro-molecules thereby increasing its (A) Tensile strength (B) Chemical resistance (C) Flexibility (D) All (A), (B) & (C)

Last Answer : (C) Flexibility

Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : (4) Terephthalic acid Explanation: Terylene is a co-polymer of ethylene glycol and Terephthalic acid. Also known as Dacron, it is prepared by the condensation polymerization of ethylene glycerol and. ... in the presence of a catalyst consisting of a mixture of zinc acetate and antimony trioxide.

Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Description : Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid

Last Answer : Terephthalic acid

Chemically, fats are esters of long carbon-chain acids and which of the following: w) ethanol x) glycerol y) ethylene glycol z) sodium hydroxide

Description : Chemically, fats are esters of long carbon-chain acids and which of the following: w) ethanol x) glycerol y) ethylene glycol z) sodium hydroxide

Last Answer : ANSWER: X -- GLYCEROL

Sizing material is incorporated in paper to(A) Impart resistance to penetration by liquids(B) Increase its thickness(C) Increase its flexibility & opacity(D) Increase its brightness

Description : Sizing material is incorporated in paper to (A) Impart resistance to penetration by liquids (B) Increase its thickness (C) Increase its flexibility & opacity (D) Increase its brightness

Last Answer : (A) Impart resistance to penetration by liquids

In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Description : In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin

Last Answer : Lower the freezing point

Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making

(3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is an odorless, colourless, syrupy, sweettasting liquid. Ethylene glycol is toxic, and ingestion can result in death. Due to its low freezing point ethylene glycol resists freezing. A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).

Description : (3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is ... A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).

Last Answer : Rust is - (1) A mixture of Fe₂O₃ and Fe(OH) ₂ (2) A mixture of FeO and Fe(OH)₂ (3) FeO only (4) A mixture of Fe₂O₃, 3H₂O and FeO

Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Last Answer : (B) As plasticisers

Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Last Answer : (B) As plasticisers

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

Rosin soap is added during paper manufacture to (A) Impart adhesive properties (B) Improve opacity (C) Impart resistance to penetration by liquids (D) None of these

Description : Rosin soap is added during paper manufacture to (A) Impart adhesive properties (B) Improve opacity (C) Impart resistance to penetration by liquids (D) None of these

Last Answer : (C) Impart resistance to penetration by liquids

Reaction of ortho-phosphoric acid with soda ash produces (A) Sodium Tributyl phosphate (STPP) (B) Tricresyl phosphate (C) Tributyl phosphate (D) Nitrophosphate

Description : Reaction of ortho-phosphoric acid with soda ash produces (A) Sodium Tributyl phosphate (STPP) (B) Tricresyl phosphate (C) Tributyl phosphate (D) Nitrophosphate

Last Answer : (A) Sodium Tributyl phosphate (STPP)

Reaction of nitric acid and sulphuric acid with phosphate rock produces (A) Nitrophosphate (B) Diammonium phosphate (C) Tricresyl phosphate (D) Tributyl phosphate

Description : Reaction of nitric acid and sulphuric acid with phosphate rock produces (A) Nitrophosphate (B) Diammonium phosphate (C) Tricresyl phosphate (D) Tributyl phosphate

Last Answer : (A) Nitrophosphate

Reaction of Cresylic acid with __________ produces Tricresyl phosphate.(A) Phosphorous pentoxide (B) Phosphorous oxychloride (C) Ammonium phosphate (D) Calcium phosphate

Description : Reaction of Cresylic acid with __________ produces Tricresyl phosphate.. (A) Phosphorous pentoxide (B) Phosphorous oxychloride (C) Ammonium phosphate (D) Calcium phosphate

Last Answer : (B) Phosphorous oxychloride

(CH3 C6 H4 )3 PO4 is the chemical formula of (A) Triple superphosphate (B) Tricresyl phosphate (C) Fluorapatite (D) Superphosphate

Description : (CH3 C6 H4 )3 PO4 is the chemical formula of (A) Triple superphosphate (B) Tricresyl phosphate (C) Fluorapatite (D) Superphosphate

Last Answer : (B) Tricresyl phosphate

Tricresyl phosphate is chemically represented as (A) (CH3 C6 H4 )3 PO4 (B) Ca10 (PO4 )3F6 (C) (NH4 )2HPO4 (D) NH4H2PO4

Description : Tricresyl phosphate is chemically represented as (A) (CH3 C6 H4 )3 PO4 (B) Ca10 (PO4 )3F6 (C) (NH4 )2HPO4 (D) NH4H2PO4

Last Answer : (A) (CH3 C6 H4 )3 PO4

Calgon used in water treatment is chemically (A) Sodium phosphate (B) Sodium hexametaphosphate (C) Calcium phosphate (D) Tricresyl phosphate

Description : Calgon used in water treatment is chemically (A) Sodium phosphate (B) Sodium hexametaphosphate (C) Calcium phosphate (D) Tricresyl phosphate

Last Answer : (B) Sodium hexametaphosphate

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these

Last Answer : (D) None of these

Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Last Answer : (A) Terylene

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these

Last Answer : (D) None of these

Which of the following additives are added to plastics to make it impervious to X-rays? (A) Asbestos (B) Barium salt (C) Carborundum (D) Phthalic acid

Description : Which of the following additives are added to plastics to make it impervious to X-rays? (A) Asbestos (B) Barium salt (C) Carborundum (D) Phthalic acid

Last Answer : (B) Barium salt

Which of the following additives/water proofing agents is added to lower the hydrophilic (moisture loving) characteristic of cement? (A) Xanthates (B) Stearic acid (C) Calcium & aluminium stearate (D) Formic acid

Description : Which of the following additives/water proofing agents is added to lower the hydrophilic (moisture loving) characteristic of cement? (A) Xanthates (B) Stearic acid (C) Calcium & aluminium stearate (D) Formic acid

Last Answer : (C) Calcium & aluminium stearate

Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) Metallic soaps with frothing agent and free Stearic acid to achieve transparency (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Description : Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) ... (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Last Answer : (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency

Vitamin required for metabolism of diols e.g. conversion of ethylene glycol to acetaldehyde is (A) Thiamin (B) Cobalamin (C) Pyridoxine (D) Folic acid

Description : Vitamin required for metabolism of diols e.g. conversion of ethylene glycol to acetaldehyde is (A) Thiamin (B) Cobalamin (C) Pyridoxine (D) Folic acid

Last Answer : Answer : B

The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Description : The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum

Last Answer : Styrene

Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Description : Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene

Last Answer : Phenol and formaldehyde

Oxidation of acetaldehyde with Na2Cr2O7/H+ gives (a) Ethylene glycol (b) Acetic acid (c) Ethanol (d) Acetone

Description : Oxidation of acetaldehyde with Na2Cr2O7/H+ gives (a) Ethylene glycol (b) Acetic acid (c) Ethanol (d) Acetone

Last Answer : Acetic acid

Which of the following is used as an antifreeze? (a) Ethylene glycol (b) Glycerol (c) Diethyl ether (d) Picric acid

Description : Which of the following is used as an antifreeze? (a) Ethylene glycol (b) Glycerol (c) Diethyl ether (d) Picric acid

Last Answer : Ethylene glycol

When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Description : When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Last Answer : Oxalic acid

Ethylene glycol undergoes oxidation with hot acidic KMnO4 to form : (a) Formic acid (b) Formaldehyde(c) Acetic acid(d) Acetaldehyde

Description : Ethylene glycol undergoes oxidation with hot acidic KMnO4 to form : (a) Formic acid (b) Formaldehyde (c) Acetic acid (d) Acetaldehyde

Last Answer : Formic acid

Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Description : Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Last Answer : Ethylene glycol

__________ are added in lacquers to remove film brittleness and to improve adhereness. (A) Film forming materials (B) Plasticisers (C) Diluents (D) Solvents

Description : __________ are added in lacquers to remove film brittleness and to improve adhereness. (A) Film forming materials (B) Plasticisers (C) Diluents (D) Solvents

Last Answer : (B) Plasticisers

. Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Description : . Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation

Last Answer : (C) Give elasticity & prevent cracking of the film

The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT

Last Answer : (B) Cyclohexane

Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index is 4.5, the volume fraction of solids in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Description : A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index ... in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Last Answer : (C) 0.6

Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

How Would You Do Glycol Filling Or Fill Seal Liquids In Seal Pots 7 Draw And Explain?

Description : How Would You Do Glycol Filling Or Fill Seal Liquids In Seal Pots 7 Draw And Explain?

Last Answer : The procedure for glycol filling is : 1. Close the primary isolation valves. 2. Open the vent on the seal pots. 3. Drain the use glycol if present. 4. Connect a hand pump on L.P. side while ... 9. Close the seal pot vent valves. 10. Close equalizer valve. 11. Open both the primary isolation valves.

How would you do Glycol filling or fill seal liquids in seal pots 7 Draw and explain.

Description : How would you do Glycol filling or fill seal liquids in seal pots 7 Draw and explain.

Last Answer : The procedure for glycol filling is : Close the primary isolation valves. Open the vent on the seal pots. Drain the used glycol if present. Connect a hand pump on L.P. side while ... . Close the seal pot vent valves. Close equalizer valve. Open both the primary isolation valves.

Ethylene glycol when heated in the presence of an hydrous `ZnCl_(2)` yields

Description : Ethylene glycol when heated in the presence of an hydrous `ZnCl_(2)` yields

Last Answer : Ethylene glycol when heated in the presence of an hydrous `ZnCl_(2)` yields A. Ethanal B. Ethylene oxide C. Dioxane D. Diethylene glycol

Which IMF is the strongest in Ethylene Glycol (HOCH2CH2OH)?

Description : Which IMF is the strongest in Ethylene Glycol (HOCH2CH2OH)?

Last Answer : These are hydrogen bonds and dispersion forces.