__________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

__________ is a copolymer.
(A) Nylon-66
(B) Polypropylene
(C) PVC
by

1 Answer

Answer :

(A) Nylon-66
by

Related questions

Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Last Answer : (B) Nylon-66

Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene

Last Answer : (A) Terylene

Which of the following is a copolymer? (A) Polystyrene (B) SBR (C) PTFE (D) Polypropylene

Description : Which of the following is a copolymer? (A) Polystyrene (B) SBR (C) PTFE (D) Polypropylene

Last Answer : (B) SBR

__________ is a copolymer. (A) Styrene butadiene rubber (SBR) (B) Neoprene (C) PVC (D) None of these

Description : __________ is a copolymer. (A) Styrene butadiene rubber (SBR) (B) Neoprene (C) PVC (D) None of these

Last Answer : (A) Styrene butadiene rubber (SBR

Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC

Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66.  (b) Neoprene, PVC and Nylon 6.

Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Description : Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Last Answer : (B) PVC

Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Description : Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Last Answer : (B) Polyacrylonitrile

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Description : Which of the following is a copolymer? (A) PVC (B) Bakelite (C) Polythene (D) Teflon

Last Answer : (B) Bakelite

In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Description : In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Last Answer : (A) Terylene

Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Description : Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Last Answer : (A) Polystyrene

Liners of bags are usually made of (A) Polythene (B) PVC (C) Polypropylene (D) Polyesters

Description : Liners of bags are usually made of (A) Polythene (B) PVC (C) Polypropylene (D) Polyesters

Last Answer : (C) Polypropylene

What is the difference between polypropylene and PVC?

Description : What is the difference between polypropylene and PVC?

Last Answer : PVC is the most common plastic used in book covering materials, and has been used for many years. Polypropylene has become more common recently. Both of these plastics have different handling characteristics. PVC is ... plastic. PVC is known to have a low level of acidity. PVC is cheaper than PP.

Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Description : Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Last Answer : (1) Polyamide Explanation: Nylon is a generic designation for a family of synthetic polymers known generically as aliphatic polyamides. It is one of the most commonly used polymers.

Which of the following are condensation polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) Both II and III

Description : Which of the following are condensation polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) Both II and III

Last Answer : Only III

Which of the following are addition polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) both I and II

Description : Which of the following are addition polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) both I and II

Last Answer : both I and II

Which of the following is an example of a condensation polymer? (a) Nylon-6,6 (b) Teflon (c) Polypropylene (d) Orlon

Description : Which of the following is an example of a condensation polymer? (a) Nylon-6,6 (b) Teflon (c) Polypropylene (d) Orlon

Last Answer : Nylon-6,6

Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Description : Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Last Answer : Polyamide

__________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Last Answer : (A) Teflon

__________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Description : __________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene

Last Answer : (A) Neoprene

The inter particle forces between linear chains in nylon-66 are __________ bonds. (A) Hydrogen (B) Covalent (C) Ionic (D) None of these

Description : The inter particle forces between linear chains in nylon-66 are __________ bonds. (A) Hydrogen (B) Covalent (C) Ionic (D) None of these

Last Answer : (A) Hydrogen

Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Last Answer : (B) As plasticisers

Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Description : Which of the following polymers has the tendency of decomposing before melting? (A) Polystyrene (B) Nylon (C) PVC (D) None of these

Last Answer : (C) PVC

Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC

Last Answer : (B) Dacron

Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Description : Phthalic anhydride is used (A) In making PVC (B) As plasticisers (C) In insecticides manufacture (D) For making nylon-6

Last Answer : (B) As plasticisers

Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Last Answer : Ans: Nylon 6 —Condensation polymer  Neoprene and PVC— Addition polymer.

Arrange the following Polymers in increasing order of inter molecular forces Nylon 6, Neoprene and PVC

Description : Arrange the following Polymers in increasing order of inter molecular forces Nylon 6, Neoprene and PVC

Last Answer : Ans : Nylon 6, PVC and. Neop 

Which of the following polymers contain nitrogen (a) PVC (b) Teflon (c) Nylon (d) Terylene

Description : Which of the following polymers contain nitrogen (a) PVC (b) Teflon (c) Nylon (d) Terylene

Last Answer : Nylon

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (B) Nylon-66

Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)

Last Answer : (C) Higher hardness

Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Last Answer : (B) Nylon-66

Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these

Last Answer : (A) Hexamethylene diamine and adipic acid

Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite

Last Answer : (B) Teflon

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Description : Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR

Last Answer : (B) Nylon-6

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin

Last Answer : (B) Nylon-66

Polycaprolactam is nothing but (A) Orlon (B) Nylon-66 (C) Nylon-6 (D) Saran

Description : Polycaprolactam is nothing but (A) Orlon (B) Nylon-66 (C) Nylon-6 (D) Saran

Last Answer : (C) Nylon-6

The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid

Description : The organic acid monomer in nylon-66 is (A) Sebacic acid (B) Terephthalic acid (C) Adipic acid (D) Benzoic acid

Last Answer : (C) Adipic acid

In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these

Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these

Last Answer : (B) Hexamethylene diamine and the adipic acid

Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Last Answer : (A) Abrasion resistance

Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these

Last Answer : (D) None of these

Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite

Last Answer : (A) Polyisoprene

Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit

Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit

Last Answer : (B) Nylon-66

In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Diamine and the ring (B) Dibasic acid and the ring (C) Diamine and the dibasic acid (D) None of these

Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Diamine and the ring (B) Dibasic acid and the ring (C) Diamine and the dibasic acid (D) None of these

Last Answer : (C) Diamine and the dibasic acid

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Description : Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon

Last Answer : (A) Nylon-6

Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Description : Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966

Last Answer : (A) Average degree of polymerisation of the polymer is 1966