Which of the following polymers does not belong to the class of Polyacrylate polymer? (A) PMMA(B) Polyacrylonitrile(C) Poly Ethyl acrylate(D) None of these

Which of the following polymers does not belong to the class of
Polyacrylate polymer?
(A) PMMA
(B) Polyacrylonitrile
(C) Poly Ethyl acrylate
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

Orlan fibre which is used as a wool substitute is (A) An amorphous polymer (B) A natural polymeric fibre (C) Polyacrylonitrile (D) Poly-methyl-methacrylate (PMMA)

Description : Orlan fibre which is used as a wool substitute is (A) An amorphous polymer (B) A natural polymeric fibre (C) Polyacrylonitrile (D) Poly-methyl-methacrylate (PMMA)

Last Answer : (C) Polyacrylonitrile

Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Description : Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Last Answer : (C) Poly-methyl-methacrylate (PMMA)

The generic chemical name for the class of polymers which are commercially known as nylons is (A) Polyolefins (B) Polyamide (C) Polyacrylate (D) Polyurethane

Description : The generic chemical name for the class of polymers which are commercially known as nylons is (A) Polyolefins (B) Polyamide (C) Polyacrylate (D) Polyurethane

Last Answer : (B) Polyamide

Which of the following is not the commercial name of poly-methyl￾methacrylate (PMMA)? (A) Perspex (B) Lucite (C) Plexiglass (D) Teflon

Description : Which of the following is not the commercial name of poly-methyl￾methacrylate (PMMA)? (A) Perspex (B) Lucite (C) Plexiglass (D) Teflon

Last Answer : (D) Teflon

Poly-methyl-methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Description : Poly-methyl-methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Last Answer : (C) Perspex

Which of the following is not the commercial name of poly-methyl methacrylate (PMMA)? (A) Styrofoam (B) Lucite (C) Perspex (D) Plexiglass

Description : Which of the following is not the commercial name of poly-methyl methacrylate (PMMA)? (A) Styrofoam (B) Lucite (C) Perspex (D) Plexiglass

Last Answer : (A) Styrofoam

Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Description : Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Last Answer : (B) Polyacrylonitrile

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

In a co-polymer, the repeating units contain two different monomers. Which of the following is a copolymer? (A) PTFE (B) Buna-S (C) PMMA (D) Polycaprolactam

Description : In a co-polymer, the repeating units contain two different monomers. Which of the following is a copolymer? (A) PTFE (B) Buna-S (C) PMMA (D) Polycaprolactam

Last Answer : (B) Buna-S

PMMA is the polymer of:

Description : PMMA is the polymer of:

Last Answer : PMMA is the polymer of: A. methylmethacrylate B. methacrylate C. methylacrylate D. ethylacrylate

Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Description : Polymerisation of poly functional monomers produces polymers having (A) Good mechanical strength (B) Low viscosity (C) Low melting point (D) None of these

Last Answer : (A) Good mechanical strength

Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene

Octopus and squid belong to the class of molluscs known as: a) cephalopoda (pron: sef-eh-lah-pod-ah) b) bivalvia c) gastropoda (pron: gas-tro-pod-ah) d) polyplacophora (pron: poly-pla-so-for-ah)

Description : Octopus and squid belong to the class of molluscs known as: a) cephalopoda (pron: sef-eh-lah-pod-ah) b) bivalvia c) gastropoda (pron: gas-tro-pod-ah) d) polyplacophora (pron: poly-pla-so-for-ah) 

Last Answer : ANSWER: A -- CEPHALOPODA

Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Description : Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Last Answer : (A) Melamine resins

The monomer of poly vinyl chloride (PVC) is (A) Chloroethane (B) Ethylene dichloride (C) Ethyl chloride (D) Chloroform

Description : The monomer of poly vinyl chloride (PVC) is (A) Chloroethane (B) Ethylene dichloride (C) Ethyl chloride (D) Chloroform

Last Answer : (A) Chloroethane

Terylene is a/an (A) Addition polymer (B) Poly amide (C) Homopolymer (D) None of these

Description : Terylene is a/an (A) Addition polymer (B) Poly amide (C) Homopolymer (D) None of these

Last Answer : (D) None of these

Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Description : Molecular weight of a polymer is equal to the molecular weight of the repeat unit multiplied by the degree of polymerisation. What is the molecular weight of poly vinyl chloride (PVC), if its degree of polymerisation is 800? (A) 50000 (B) 51600 (C) 49200 (D) 50800

Last Answer : (A) 50000

Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Last Answer : (C) Poly tetra-fluoro-ethylene (P.T.F.E.)

Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Description : Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Last Answer : (A) Polymers made of only one monomer is called homopolyme

In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Description : In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Last Answer : (D) Saturated polyeste

. In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Description : . In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher (A) Densities (B) Melting point (C) Tensile strength (D) Hardness, rigidity & brittleness

Last Answer : (D) Hardness, rigidity & brittleness

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to a very high temperature (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Description : Pick out the correct statement. (A) Plastics are good conductors of heat and electricity (B) All the polymers are highly crystalline in nature (C) Polymers can be vaporised by heating to ... D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Last Answer : (D) The liquid polymer becomes greasy, then waxy and finally solid on increasing the degree of polymerisation

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Pick out the correct combination about the role of various additives used in polymers. (A) Plasticiser: increases the polymer strength (B) Heat stabiliser: increases the maximum service temperature (C) Fillers: Does not affect the property of polymer but increases its weight (D) Lubricants: increases the flexibility of polymers

Description : Pick out the correct combination about the role of various additives used in polymers. (A) Plasticiser: increases the polymer strength (B) Heat stabiliser: increases the maximum service ... property of polymer but increases its weight (D) Lubricants: increases the flexibility of polymers

Last Answer : Option C

What is elasticity in polymers generally related to amount of hydrogen bonding between different subunits number of subunits in the polymer chain its greater tensile strength the synthetic composure?

Description : What is elasticity in polymers generally related to amount of hydrogen bonding between different subunits number of subunits in the polymer chain its greater tensile strength the synthetic composure?

Last Answer : amount of hydrogen bonding between different subunitsnumber of subunits in the polymer chainits greater tensile strengththe synthetic composure

Are All Conductive Polymers, Conjugated Polymer?

Description : Are All Conductive Polymers, Conjugated Polymer?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Description : Classify the polymers as addition and condensation polymer— Nylon 6, Neoprene and PVC.

Last Answer : Ans: Nylon 6 —Condensation polymer  Neoprene and PVC— Addition polymer.

What is the advantage of synthetic polymer over glass? OR Why is glass being replaced by synthetic polymers?

Description : What is the advantage of synthetic polymer over glass? OR Why is glass being replaced by synthetic polymers?

Last Answer : Glass is being replaced by light and transparent synthetic polymers like poly methyl metacrylate polymers. The advantages of polymers are that they are unbreakable, light and scratches on polymers can be removed by wiping with acetone.

Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Description : Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but (A) Polyacrylonitrile (B) Polyamide (C) Saturated polyester (D) Alkyd resin

Last Answer : (A) Polyacrylonitrile

Which of the following is generally not drawn into fibre? (A) Polyamide (B) Unsaturated polyesters (C) Saturated polyesters (D) Polyacrylonitrile

Description : Which of the following is generally not drawn into fibre? (A) Polyamide (B) Unsaturated polyesters (C) Saturated polyesters (D) Polyacrylonitrile

Last Answer : (B) Unsaturated polyesters

The major component of acrylic fibres is (A) Polyamides (B) Polyolefins(C) Polyacrylonitrile(D) Polyesters

Description : The major component of acrylic fibres is (A) Polyamides (B) Polyolefins (C) Polyacrylonitrile (D) Polyesters

Last Answer : (C) Polyacrylonitrile

__________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Description : __________ is not a polyester fibre. (A) Terylene (B) Dacron (C) Nylon (D) Polyacrylonitrile

Last Answer : (C) Nylon

Direct reaction of unsaturated hydrocarbons with either NO or NO2 produces an eye irritating pollutant compound known as (A) Photochemical smog (B) Peroxyacetyl nitrate (PAN) or methyl nitrite (C) Benzopyrene (D) Polyacrylonitrile

Description : Direct reaction of unsaturated hydrocarbons with either NO or NO2 produces an eye irritating pollutant compound known as (A) Photochemical smog (B) Peroxyacetyl nitrate (PAN) or methyl nitrite (C) Benzopyrene (D) Polyacrylonitrile

Last Answer : (B) Peroxyacetyl nitrate (PAN) or methyl nitrite

Plexiglass (also called Lucite) because of its high optical transparency is used for making lenses. It is chemically (A) Polymethyl methacrylate (PMMA) (B) Polytetrafluroethylene (PTFE) (C) Polycarbonates (D) Phenolic resins

Description : Plexiglass (also called Lucite) because of its high optical transparency is used for making lenses. It is chemically (A) Polymethyl methacrylate (PMMA) (B) Polytetrafluroethylene (PTFE) (C) Polycarbonates (D) Phenolic resins

Last Answer : (A) Polymethyl methacrylate (PMMA)

Polymethyl methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Description : Polymethyl methacrylate (PMMA) is known as (A) Bakelite (B) Teflon (C) Perspex (D) Nylon-6

Last Answer : (C) Perspex

Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Description : Window panes of aeroplanes are normally made of (A) Perspex (PMMA) (B) Teflon (PTFE) (C) Bakelite (phenol formaldehyde) (D) Polystyrene

Last Answer : Option A

What is the monomer of Polyacrylonitrile?

Description : What is the monomer of Polyacrylonitrile?

Last Answer : Ans: Acrylonitrile 

Poly-tetra-fluoro ethylene (PTFE) is known as (A) Dacron (B) Teflon (C) Bakelite

Description : Poly-tetra-fluoro ethylene (PTFE) is known as (A) Dacron (B) Teflon (C) Bakelite

Last Answer : (B) Teflon

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

Main constituent of natural rubber is (A) Polystyrene (B) Polyisoprene (C) Polybutadiene (D) Poly chloroprene

Description : Main constituent of natural rubber is (A) Polystyrene (B) Polyisoprene (C) Polybutadiene (D) Poly chloroprene

Last Answer : (B) Polyisoprene

Poly-methyl-methacrylate, which is an acrylic resin, is also called (A) Thiokol (B) Plexiglass or Lucite (C) Dacron (D) Teflon

Description : Poly-methyl-methacrylate, which is an acrylic resin, is also called (A) Thiokol (B) Plexiglass or Lucite (C) Dacron (D) Teflon

Last Answer : (B) Plexiglass or Lucite

Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene

Description : Neoprene is chemically known as (A) Polybutadiene (B) Styrene butadiene rubber (SBR) (C) Polyurethane (D) Poly chloroprene

Last Answer : (D) Poly chloroprene

Contact lenses for eyes are made of Perspex, which is nothing but (A) poly-methyl-methacrylate (B) Polystyrene (C) Unsaturated polyester (D) Polypropylene

Description : Contact lenses for eyes are made of Perspex, which is nothing but (A) poly-methyl-methacrylate (B) Polystyrene (C) Unsaturated polyester (D) Polypropylene

Last Answer : (A) poly-methyl-methacrylate

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Description : Addition polymerisation is not involved in the manufacture of (A) Low density polythene (B) Poly vinyl chloride (C) Polystyrene (D) Polyhexamethylene adipamide

Last Answer : (D) Polyhexamethylene adipamide

Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene

Last Answer : (A) Bakelite

Sodium tri poly phosphate (STPP) is manufactured by reaction of phosphoric acid with sodium(A) Carbonate(B) Phosphate(C) Bicarbonate(D) Silicate

Description : Sodium tri poly phosphate (STPP) is manufactured by reaction of phosphoric acid with sodium (A) Carbonate (B) Phosphate (C) Bicarbonate (D) Silicate

Last Answer : (A) Carbonat