Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Which of the following is not applicable to fluidised bed combustion of
coal?
(A) It cannot burn low grade coal
(B) It achieves higher fuel combustion efficiency
(C) Less heat transfer surface area is required in boilers
(D) None of these
by

1 Answer

Answer :

(A) It cannot burn low grade coal
by

Related questions

Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Description : Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Use of pulverised coal in boilers provides (A) Higher calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace wall

Description : Use of pulverised coal in boilers provides (A) Higher calorific value (B) Better combustion (C) Smokeless burning (D) Less erosion on furnace wall

Last Answer : (B) Better combustion

are portable devices capable of estimating the combusting efficiency of furnaces, boilers, or other fossil fuel burning machines. a) Sound analyzer. c) Combustion analyzer. b) Light analyzer. d)Temperature analyzer

Description : are portable devices capable of estimating the combusting efficiency of furnaces, boilers, or other fossil fuel burning machines. a) Sound analyzer. c) Combustion analyzer. b) Light analyzer. d)Temperature analyzer

Last Answer : Combustion analyzer. 

are portable devices capable of estimating the combusting efficiency of furnaces, boilers, or other fossil fuel burning machines. a) Sound analyzer. b) Light analyzer. c) Combustion analyzer. d) Temperature analyzer.

Description : are portable devices capable of estimating the combusting efficiency of furnaces, boilers, or other fossil fuel burning machines. a) Sound analyzer. b) Light analyzer. c) Combustion analyzer. d) Temperature analyzer.

Last Answer : Combustion analyzer.

State some advantages of fluidised bed boilers?

Description : State some advantages of fluidised bed boilers?

Last Answer : Any type of fuel - solid, liquid (or) gaseous fuel (or) domestic and industrial waste can be used in FBC system. Any type- of combustible matter can be burned by adjusting the factors ... possible. High combustion efficiency. The solid fuel need not be pulverised in fluidised bed boilers.

Write about fluidised bed boilers?

Description : Write about fluidised bed boilers?

Last Answer : When the high velocity gas is passed through a packed bed of finely divided solid particles, the particles become suspended in the gas stream and the packed bed becomes a fluidised bed. When ... Bed Combustion. The boiler plant using this fluidised bed combustion is known as fluidised bed boilers.

Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Description : Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Last Answer : (B) Keeping the flue gas exhaust temperature very high

Higher fuel combustion efficiency cannot be achieved by (A) Preheating of fuel gases & combustion air (B) Reducing sulphur content in the fuel (C) Adopting proper fuel firing technique & fuel preparation (D) Supplying correct amount of combustion air

Description : Higher fuel combustion efficiency cannot be achieved by (A) Preheating of fuel gases & combustion air (B) Reducing sulphur content in the fuel (C) Adopting proper fuel firing technique & fuel preparation (D) Supplying correct amount of combustion air

Last Answer : (B) Reducing sulphur content in the fuel

Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Description : Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Last Answer : (C) Too much air for combustion

Heat transfer by __________ is almost absent in case of fluidised bed drying operation. (A) Radiation (B) Conduction (C) Convection (D) Both (B) & (C)

Description : Heat transfer by __________ is almost absent in case of fluidised bed drying operation. (A) Radiation (B) Conduction (C) Convection (D) Both (B) & (C)

Last Answer : A) Radiation

The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Description : The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Last Answer : A]Increase thermal efficiency of boiler

The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these

Description : The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these

Last Answer : (A) Fuel cost per unit power generated is less

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier. (A) Entrained (B) Moving (C) Fixed (D) Fluidised

Description : Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier. (A) Entrained (B) Moving (C) Fixed (D) Fluidised

Last Answer : (A) Entrained

Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

. Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Description : . Lurgi coal gasifier is a pressurised __________ bed reactor. (A) Moving (B) Fixed (C) Fluidised (D) Entrained

Last Answer : (A) Moving

Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Description : Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In Lurgi coal gasifier, (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Larger quantity of coal can be processed

Description : In Lurgi coal gasifier, (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Larger quantity of coal can be processed

Last Answer : (D) Larger quantity of coal can be processed

In the Lurgi coal gasifier (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Large quantity of coal can be processed

Description : In the Lurgi coal gasifier (A) Coking coals cannot be used (B) Low carbon conversion efficiency is achieved (C) Entrainment of solids is higher (D) Large quantity of coal can be processed

Last Answer : (D) Large quantity of coal can be processed

Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature (C) Heat release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Description : Combustion of pulverised coal as compared to that of lump coal (A) Develops a non-luminous flame (B) Develops a low temperature flame (C) Can be done with less excess air (D) Provides a lower rate of heat release

Last Answer : (C) Can be done with less excess ai

To reduce the stack loss, heat recovery from flue gas can be done by (A) Preheating of cold stock (B) Preheating of combustion air (C) Steam generation in waste heat boilers (D) All (A), (B) and (C)

Description : To reduce the stack loss, heat recovery from flue gas can be done by (A) Preheating of cold stock (B) Preheating of combustion air (C) Steam generation in waste heat boilers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Higher furnace temperature cannot be achieved by use of a lean fuel gas in the furnace by (A) Increasing the draft in the furnace (B) Preheating the fuel gas (C) Oxygen enrichment of combustion air (D) Preheating the combustion air

Description : Higher furnace temperature cannot be achieved by use of a lean fuel gas in the furnace by (A) Increasing the draft in the furnace (B) Preheating the fuel gas (C) Oxygen enrichment of combustion air (D) Preheating the combustion air

Last Answer : (A) Increasing the draft in the furnace

During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Description : During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal(C) Accelerates the burning rate and economises on fuel combustion(D) All (A), (B) and (C)

Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel combustion

Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air(C) Hydrocarbon fuel(D) Pulverised coal as fuel

Description : Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace. (A) Low amount of excess combustion air (B) Large quantity of excess combustion air (C) Hydrocarbon fuel (D) Pulverised coal as fuel

Last Answer : (A) Low amount of excess combustion air

Minimum porosity for fluidisation is(A) That corresponding to static bed (B) That corresponding to completely fluidised bed (C) The porosity of the bed when true fluidisation begins (D) Less than that of the' static bed

Description : Minimum porosity for fluidisation is (A) That corresponding to static bed (B) That corresponding to completely fluidised bed (C) The porosity of the bed when true fluidisation begins (D) Less than that of the' static bed

Last Answer : (C) The porosity of the bed when true fluidisation begins

In a fluidised bed reactor (A) Temperature gradients are very high (B) Temperature is more or less uniform (C) Hot spots are formed (D) Segregation of the solids occurs

Description : In a fluidised bed reactor (A) Temperature gradients are very high (B) Temperature is more or less uniform (C) Hot spots are formed (D) Segregation of the solids occurs

Last Answer : (B) Temperature is more or less uniform

Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Description : Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Last Answer : (B) Greater than

Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with increase in its temperature c) higher the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Description : Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with ... the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Last Answer : c) higher the viscosity of liquid fuels, higher will be its heating value

The fuel mostly used in steam boilers is  A. brown coal  B. peat  C. coking bituminous coal  D. non-coking bituminous coal

Description : The fuel mostly used in steam boilers is  A. brown coal  B. peat  C. coking bituminous coal  D. non-coking bituminous coal

Last Answer : Answer: D

Which of the following is not increased by using preheated combustion air in place of ordinary air at room temperature? (A) Calorific value of the fuel (B) Flame temperature achieved (C) Speed of combustion of fuel (D) Heat transfer rate to the stock in the furnace

Description : Which of the following is not increased by using preheated combustion air in place of ordinary air at room temperature? (A) Calorific value of the fuel (B) Flame temperature achieved (C) Speed of combustion of fuel (D) Heat transfer rate to the stock in the furnace

Last Answer : (A) Calorific value of the fuel

The function of secondary combustion air is to (A) Pneumatically convey the pulverised coal (B) Completely burn the volatile matter (C) Burn the lumpy coal (D) None of these

Description : The function of secondary combustion air is to (A) Pneumatically convey the pulverised coal (B) Completely burn the volatile matter (C) Burn the lumpy coal (D) None of these

Last Answer : (B) Completely burn the volatile matter

The main function of primary air in pulverised coal fired burner is to (A) Burn CO to CO2 (B) Dry and transport the coal (C) Have proper combustion by supplying it around the burner (D) Preheat the tertiary air used for complete combustion of CO to CO2

Description : The main function of primary air in pulverised coal fired burner is to (A) Burn CO to CO2 (B) Dry and transport the coal (C) Have proper combustion by supplying it around the burner (D) Preheat the tertiary air used for complete combustion of CO to CO2

Last Answer : (B) Dry and transport the coal

Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas because of the color of the flame, when it is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Description : Pick out the wrong statement. (A) Strongly caking coal should not be used in the Lurgi gasifier (B) Acetylene gas cannot be used for illumination purpose (C) Water gas is called blue gas ... is burnt (D) Gaseous fuels require less percentage of excess air for combustion as compared to liquid fuels

Last Answer : (B) Acetylene gas cannot be used for illumination purpose

In counter flow compared to parallel flow, (A) LMTD is greater (B) Less surface area is required for a given heat transfer rate (C) Both (A) and (B) (D) More surface area is required for a given heat transfer rate

Description : In counter flow compared to parallel flow, (A) LMTD is greater (B) Less surface area is required for a given heat transfer rate (C) Both (A) and (B) (D) More surface area is required for a given heat transfer rate

Last Answer : (C) Both (A) and (B)

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

Double pipe heat exchangers are used (A) When heat transfer area required is very high (B) When heat transfer area required is very low, i.e. (100-200 ft 2 ). (C) Because it occupies less floor area (D) Because it is less costly

Description : Double pipe heat exchangers are used (A) When heat transfer area required is very high (B) When heat transfer area required is very low, i.e. (100-200 ft 2 ). (C) Because it occupies less floor area (D) Because it is less costly

Last Answer : (B) When heat transfer area required is very low, i.e. (100-200 ft 2 )

Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer across an equal area held at the (A) Surrounding temperature (B) Average temperature of the fin (C) Temperature of the fin end (D) Constant temperature equal to that of the base

Description : Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer ... (C) Temperature of the fin end (D) Constant temperature equal to that of the base

Last Answer : (D) Constant temperature equal to that of the base

Pick out the wrong statement. (A) Enthalpies of all elements in their standard states are assumed to be zero (B) Combustion reactions are never endothermic in nature (C) Heat of reaction at constant volume is equal to the change in internal energy (D) Clausius-Clapeyron equation is not applicable to melting process

Description : Pick out the wrong statement. (A) Enthalpies of all elements in their standard states are assumed to be zero (B) Combustion reactions are never endothermic in nature (C) Heat of reaction ... to the change in internal energy (D) Clausius-Clapeyron equation is not applicable to melting process

Last Answer : (D) Clausius-Clapeyron equation is not applicable to melting process

To avoid fire by spontaneous combustion of coal due to its low temperature oxidation, it should be stored in (A) Shallow and small piles (B) Fine sizes without the presence of any lump (C) Closed space without any ventilation facility (D) Large heaps with small surface to volume ratio

Description : To avoid fire by spontaneous combustion of coal due to its low temperature oxidation, it should be stored in (A) Shallow and small piles (B) Fine sizes without the presence of any lump (C) Closed space without any ventilation facility (D) Large heaps with small surface to volume ratio

Last Answer : (A) Shallow and small piles

Spontaneous combustion of coal on storage results due to(A) Inadequate ventilation (B) Low temperature oxidation (C) Storage in large heaps with small surface to volume ratio (D) All (A), (B) and (C)

Description : Spontaneous combustion of coal on storage results due to (A) Inadequate ventilation (B) Low temperature oxidation (C) Storage in large heaps with small surface to volume ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

If the specific heat of gaseous products of combustion of a fuel is high, the abiabatic flame temperature will be (A) Low (B) High (C) Very high, if the fuel is of low calorific value (D) None of these

Description : If the specific heat of gaseous products of combustion of a fuel is high, the abiabatic flame temperature will be (A) Low (B) High (C) Very high, if the fuel is of low calorific value (D) None of these

Last Answer : (A) Low(A) Low

A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) Is more difficult to ignite and produces a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Description : A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) ... a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Last Answer : (D) None of these