Small amount of gasoline is added to alcohol to a) reduce the emission b) to increase the power output c) to increase the efficiency d) to improve cold weather starting

Small amount of gasoline is added to alcohol to a) reduce the emission b) to increase the power output c) to increase the efficiency d) to improve cold weather starting
by

1 Answer

Answer :

Answer: d Explanation: None.
by
selected by

Related questions

The reason for supercharging in any engine is to be A. increase efficiency B. increase power C. effect fuel economy D. reduce weight and bulk for a given output

Description : The reason for supercharging in any engine is to be A. increase efficiency B. increase power C. effect fuel economy D. reduce weight and bulk for a given output

Last Answer : ANSWER : D

Supercharging is done to a. increase the efficiency b. increase the power c. reduce the weight for a given output d. achieve fuel economy

Description : Supercharging is done to a. increase the efficiency b. increase the power c. reduce the weight for a given output d. achieve fuel economy

Last Answer : ANSWER c. reduce the weight for a given output

Scavenging is usually done to increase the a. thermal efficiency b. speed c. power output d. fuel consumption

Description : Scavenging is usually done to increase the a. thermal efficiency b. speed c. power output d. fuel consumption

Last Answer : ANSWER c. power output

Phenols are added in gasoline to (A) Improve the octane number(B) Act as an antioxidant(C) Reduce its viscosity(D) Increase its pour point

Description : Phenols are added in gasoline to (A) Improve the octane number (B) Act as an antioxidant (C) Reduce its viscosity (D) Increase its pour point

Last Answer : (B) Act as an antioxidant

A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel cycle is higher than the Otto cycle, at a fixed compression ratio c. The compression ratio of a diesel engine is higher than that of an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Description : A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel ... an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Last Answer : ANSWER c. The compression ratio of a diesel engine is higher than that of an S.I engine

Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat energy of gasoline/litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Description : Which of the following statement is not correct with respect to alcohols as alternate fuel in IC engines a) anti-knock characteristics of alcohol is poor b) alcohol contains about half the heat ... /litre c) alcohol does not vaporize as easily as gasoline d) alcohols are corrosive in nature

Last Answer : Answer: a Explanation: Anti-knock characteristics of alcohol is good.

Supercharging of an IC engine is done so that the A. thermal efficiency increases B. power output increases C. speed of the engine increases D. power output decreases

Description : Supercharging of an IC engine is done so that the A. thermal efficiency increases B. power output increases C. speed of the engine increases D. power output decreases

Last Answer : ANSWER : B

For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency

Description : For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency

Last Answer : Ans :d

In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter’s output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum quantization error. (C) Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Description : In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter's output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum ... Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Last Answer : (B) Reduce the maximum quantization error.

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

_______________ is used to enable cold starting, with out the use of a heater plug. a) Pintaux nozzle b) Multi hole injector c) Long stem injector d) Pintle nozzle

Description : _______________ is used to enable cold starting, with out the use of a heater plug. a) Pintaux nozzle b) Multi hole injector c) Long stem injector d) Pintle nozzle

Last Answer : Answer: a Explanation: Generally, intaux nozzle is used to enable cold starting, with out the use of a heater plug.

The _____________ sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Description : The _____________ sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Last Answer : Answer: a Explanation: The engine temperature sensor senses the temperature of the engine coolant, and from this data the computer adjusts the mixture strength to rich side for cold starting while the ... gas senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio.

The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Description : The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Last Answer : (A) 3

In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg

Description : In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg 

Last Answer : Constant pressure process Final condition of steam is dry saturated Enthalpy of dry steam = hg= hf + hfg =2776.2 KJ/Kg .Given Latent heat of vaporization = hfg = hg - hf =2776.2-762.6 =2013.6 KJ/Kg Initial condition ... hfg = 762.6+0.8 X 2013.6 =2373.48 KJ/Kg Heat added = hg-hw = 402.72 KJ/kg

In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Description : In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Last Answer : Heat supplied Q = m (h2-h1) …….(Steady flow energy equation for boiler) ; h2=3200 KJ/kg h1=2000 KJ/kg m = 10 Tons /hour = (10 x 1000)/3600 kg/sec = 2.77 Kg/sec Q = 2.77(3200-2000) = 3324 KJ/sec heat supplied for 10 Tons/hr steam generation

By supercharging the power output of an engine is expected to increase by A. 20% B. 45% C. 75% D. 50%

Description : By supercharging the power output of an engine is expected to increase by A. 20% B. 45% C. 75% D. 50%

Last Answer : ANSWER : A

Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation(C) Reduce the pour point(D) Increase its octane numbe

Description : Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation (C) Reduce the pour point (D) Increase its octane numbe

Last Answer : (D) Increase its octane numbe

The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Last Answer : ANSWER : D

In a centrifugal compressor, an increase in speed at a given pressure ratio causes A. Increase in flow B. Decrease in flow C. Increase in efficiency D. Increase in flow and decrease in efficiency

Description : In a centrifugal compressor, an increase in speed at a given pressure ratio causes A. Increase in flow B. Decrease in flow C. Increase in efficiency D. Increase in flow and decrease in efficiency

Last Answer : ANSWER : D

Volumetric efficiency of a compressor without clearance volume A. Increases with increase in compression ratio B. Decreases wit increase in compression ratio C. Not dependent upon compression ratio D. Unpredictable

Description : Volumetric efficiency of a compressor without clearance volume A. Increases with increase in compression ratio B. Decreases wit increase in compression ratio C. Not dependent upon compression ratio D. Unpredictable

Last Answer : ANSWER : C

With suction pressure being atmospheric, increase in delivery pressure with fixed clearance volume A. increase volumetric efficiency B. decrease volumetric efficiency C. does not change volumetric efficiency D. First increase volumetric efficiency and then decrease it

Description : With suction pressure being atmospheric, increase in delivery pressure with fixed clearance volume A. increase volumetric efficiency B. decrease volumetric efficiency C. does not change volumetric efficiency D. First increase volumetric efficiency and then decrease it

Last Answer : ANSWER : B

In a centrifugal compressor an increase in speed at a given pressure ratio causes A. Increase in flow and increase in efficiency B. Increase in flow and decrease in efficiency C. Decrease in flow and increase in efficiency D. Decrease in flow and decrease in efficiency

Description : In a centrifugal compressor an increase in speed at a given pressure ratio causes A. Increase in flow and increase in efficiency B. Increase in flow and decrease in efficiency C. Decrease in flow and increase in efficiency D. Decrease in flow and decrease in efficiency

Last Answer : ANSWER : B

Which one of the following statement is not correct for the volumetric efficiency of a reciprocating air compressor? A. It decreases with increase in ambient temperature B. It increases with decrease in pressure ratio C. It increases with decrease in clearance ratio D. It decreases with increases in delivery pressure

Description : Which one of the following statement is not correct for the volumetric efficiency of a reciprocating air compressor? A. It decreases with increase in ambient temperature B. It increases with ... It increases with decrease in clearance ratio D. It decreases with increases in delivery pressure

Last Answer : ANSWER : A

The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Last Answer : ANSWER d. effective compression ratio

If the temperature of intake air in internal combustion engine is lowered, the efficiency will a. increase b. decrease c. remains same d. increases upto certain limit and then decrease

Description : If the temperature of intake air in internal combustion engine is lowered, the efficiency will a. increase b. decrease c. remains same d. increases upto certain limit and then decrease

Last Answer : ANSWER a. increase

If the intake air temperature of Internal combustion engine increases, its efficiency will a. increase b. decrease c.remains same d unpredictable

Description : If the intake air temperature of Internal combustion engine increases, its efficiency will a. increase b. decrease c.remains same d unpredictable

Last Answer : ANSWER b. decrease

The thermal efficiency of a diesel cycle having fixed compression ratio with increase in cut-off ratio will a. increase b. decrease c. independent d. increase or decrease depending upon other factors

Description : The thermal efficiency of a diesel cycle having fixed compression ratio with increase in cut-off ratio will a. increase b. decrease c. independent d. increase or decrease depending upon other factors

Last Answer : ANSWER b. decrease

If the compression ratio of an engine working on Otto cycle is increased from 5 to 7 the percentage increase in efficiency will be a. 2% b. 4% c. 8% d. 14%

Description : If the compression ratio of an engine working on Otto cycle is increased from 5 to 7 the percentage increase in efficiency will be a. 2% b. 4% c. 8% d. 14%

Last Answer : ANSWER d. 14%

How the efficiency of the SI engine is affected by the specific heat ratio (γ) of the working fluid? a. the efficiency of the engine increases with increase in specific heat ratio (γ) of the working fluid b. the efficiency of the engine decreases with increase in specific heat ratio (γ) of the working fluid c. the efficiency of the engine does not affected by change in specific heat ratio (γ) of the working fluid d. none of the above

Description : How the efficiency of the SI engine is affected by the specific heat ratio (γ) of the working fluid? a. the efficiency of the engine increases with increase in specific heat ratio (γ) of the working ... not affected by change in specific heat ratio (γ) of the working fluid d. none of the above

Last Answer : ANSWER a. the efficiency of the engine increases with increase in specific heat ratio (γ) of the working fluid

What is the relation between compression ratio (rk) and the efficiency of the Otto cycle? a. efficiency decreases with increase in compression ratio b. efficiency increases with increase in compression ratio c. efficiency is not affected by change in compression ratio d. none of the above

Description : What is the relation between compression ratio (rk) and the efficiency of the Otto cycle? a. efficiency decreases with increase in compression ratio b. efficiency increases with increase in compression ratio c. efficiency is not affected by change in compression ratio d. none of the above

Last Answer : ANSWER b. efficiency increases with increase in compression ratio

A reciprocating compressor is not suitable for use as a supercharger because: A. it runs at lower rpm B. the pressure ratio is high C. volumetric efficiency is high D. it is bulky and can handle small quantity of air

Description : A reciprocating compressor is not suitable for use as a supercharger because: A. it runs at lower rpm B. the pressure ratio is high C. volumetric efficiency is high D. it is bulky and can handle small quantity of air

Last Answer : ANSWER : D

Which one of the following cannot be controlled by a 3 way catalytic converter? (a) HC emission (b) CO emission (c) NOx emission (d) SPM emission

Description : Which one of the following cannot be controlled by a 3 way catalytic converter? (a) HC emission (b) CO emission (c) NOx emission (d) SPM emission

Last Answer : Ans :d

Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Description : Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Last Answer : ANSWER : D

Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Description : Octane number of gasoline is obtained by comparing the performance of the engine when running on a mixture of the following hydrocarbons A. ethane and methane B. normal heptane and iso-octane C. iso-heptane and octane D. iso-octane and TEL

Last Answer : ANSWER : B

The molecular structure of the straight-run gasoline is changed by a) reforming b) refining c) cracking d) boiling

Description : The molecular structure of the straight-run gasoline is changed by a) reforming b) refining c) cracking d) boiling

Last Answer : Answer: a Explanation: The molecular structure of the straight-run gasoline is changed by reforming and hydrocarbons are decomposed into smaller hydrocarbons by cracking.

Gasohol is a mixture of a) 90% ethanol + 10% gasoline b) 10% ethanol + 90% gasoline c) 40% ethanol + 60% gasoline d) 50% ethanol + 50% gasoline

Description : Gasohol is a mixture of a) 90% ethanol + 10% gasoline b) 10% ethanol + 90% gasoline c) 40% ethanol + 60% gasoline d) 50% ethanol + 50% gasoline

Last Answer : Answer: b Explanation: 10% ethanol + 90% gasoline makes gashol.

Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Description : Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Last Answer : ANSWER c. gasoline

A supercharger is used to compress a. air b. gasoline c. fuel oil d. all of the above

Description : A supercharger is used to compress a. air b. gasoline c. fuel oil d. all of the above

Last Answer : ANSWER a. air

Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Description : Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Last Answer : ANSWER d. all of the above

One of the purposes of sub-cooling the liquid refrigerant is to (a) reduce compressor overheating (b) reduce compressor discharge temperature (c) increase cooling effect (d) ensure that only liquid and not the vapour enters the expansion (throttling) valve

Description : One of the purposes of sub-cooling the liquid refrigerant is to (a) reduce compressor overheating (b) reduce compressor discharge temperature (c) increase cooling effect (d) ensure that only liquid and not the vapour enters the expansion (throttling) valve

Last Answer : Ans: d

A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Description : A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Last Answer : Ans :c

An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Description : An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Last Answer : Ans :b

If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Description : If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Last Answer : Ans :c

In a variable speed SI engine, the maximum torque occurs at the maximum (a) Speed (b) Brake power (c) Indicated power (d) Volumetric efficiency

Description : In a variable speed SI engine, the maximum torque occurs at the maximum (a) Speed (b) Brake power (c) Indicated power (d) Volumetric efficiency

Last Answer : Ans :d

The ratio of indicated power to shaft power of the engine required to drive the compressor is called A. Compressor efficiency B. Volumetric efficiency C. Isothermal efficiency D. Mechanical efficiency

Description : The ratio of indicated power to shaft power of the engine required to drive the compressor is called A. Compressor efficiency B. Volumetric efficiency C. Isothermal efficiency D. Mechanical efficiency

Last Answer : ANSWER : D

If petrol is used in a diesel engine a. higher knocking will occur b. efficiency will be low c. low power will be obtained d. black smoke will be produced

Description : If petrol is used in a diesel engine a. higher knocking will occur b. efficiency will be low c. low power will be obtained d. black smoke will be produced

Last Answer : ANSWER a. higher knocking will occur

Glycol is added to aviation gasoline because it (1) reduces evaporation of petrol (2) increases efficiency of petrol (3) prevents freezing of petrol (4) reduces consumption of petrol

Description : Glycol is added to aviation gasoline because it (1) reduces evaporation of petrol (2) increases efficiency of petrol (3) prevents freezing of petrol (4) reduces consumption of petrol

Last Answer : prevents freezing of petrol

The C.O.P. of a domestic refrigerator in comparison to domestic air conditioner will be (a) same (b) more (c) less (d) dependent on weather conditions

Description : The C.O.P. of a domestic refrigerator in comparison to domestic air conditioner will be (a) same (b) more (c) less (d) dependent on weather conditions

Last Answer : Ans: c

The COP of a domestic refrigerator (a) is less than 1 (b) is more than 1 (c) is equal to 1 (d)depends upon the weather conditions.

Description : The COP of a domestic refrigerator (a) is less than 1 (b) is more than 1 (c) is equal to 1 (d)depends upon the weather conditions.

Last Answer : Ans: b

The air requirement of a petrol engine during starting compared to the theoretical air requirement for complete combustion is A. more B.unpredictable C. same D. less

Description : The air requirement of a petrol engine during starting compared to the theoretical air requirement for complete combustion is A. more B.unpredictable C. same D. less

Last Answer : ANSWER : D