Power is always __________.
A. a definite amount of energy
B. all of these
C. the rate at which energy is used
D. expressed in watts

1 Answer

Answer :

B. all of these

Related questions

Description : Power is __________. A. actual amount of power reference to 1mW B. logarithmic ratio of two powers C. definite amount of energy per time period D. current flow per time period

Last Answer : C. definite amount of energy per time period

Description : Power is a _____________ amount of energy used in specific period of time A. large B. definite C. electrical D. relative

Last Answer : B. definite

Description : Which one of the following statement is correct? (A) Radiant energy expressed in Joules, is the energy associated with electromagnetic radiation (B) The rate of transfer of radiant energy is called flux ... ) The radiant energy which falls upon a surface is termed as irradiance (D) All of these

Last Answer : Answer: Option D

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Description : The power fed to a two-bay turnstile antenna is 100 watts. If the antenna has a 2 dB power gain, what is the effective radiated power? A. 317 watts B. 158 watts C. 200 watts D. 400 watts

Last Answer : B. 158 watts

Description : What is the effective radiated power of a repeater with 200 watts transmitter power output, 4 dB feline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 317 W B. 2000 W C. 126 W D. 260 W

Last Answer : A. 317 W

Description : What is the effective radiated power of a repeater with 120 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 601 W B. 240 W C. 60 W D. 379 W

Last Answer : C. 60 W

Description : What is the effective radiated power of a repeater with 100 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 800 W B. 126 W C. 12.5 W D. 1260 W

Last Answer : B. 126 W

Description : What is the effective radiated power of a repeater with 75 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 37.6 W B. 237 W C. 150 W D. 23.7 W

Last Answer : A. 37.6 W

Description : What is the effective radiated power of a repeater with 75 watts transmitter power output, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 10 dB antenna gain? A. 600 W B. 75 W C. 18.75 W D. 150 W

Last Answer : D. 150 W

Description : What is the effective radiated power of a repeater with 50 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 7 dB antenna gain? A. 300 W B. 315 W C. 31.5 W D. 69.9 W

Last Answer : C. 31.5 W

Description : What is the effective radiated power of a repeater with 50 watts transmitter power output \, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 6 dB antenna gain? A. 158 W B. 39.7 W C. 251 W D. 69.9 W

Last Answer : B. 39.7 W

Description : A coaxial cable has 7dB of reflected power when the input is 5 watts. What is the output of the transmission line? A. 5 watts B. 2.5 watts C. 1.25 watts D. 1 watt

Last Answer : D. 1 watt

Description : If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts

Last Answer : D. 6 watts

Description : The range of speech power is ____. A. 1 – 10 watts B. 100 – 1000 milliwatts C. 10 – 100 milliwatts D. 10 – 1000 microwatts

Last Answer : 10 – 1000 microwatts

Description : Determine the effective radiated power of 20 kW TV broadcast transmitter whose antenna has a field gain of 2. A. 40 kW B. 80,000 watts C. 40,000 watts D. 8,000 watts

Last Answer : B. 80,000 watts

Description : ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Last Answer : B. 2.656 watts

Description : ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts

Last Answer : A. PAM

Description : Electrical power is expressed in _____________. A. ohms B. volts C. amps D. watts

Last Answer : Answer: D

Description : Why is the power of a loudspeaker expressed in watts?

Last Answer : Unlike sounds generated by human beings, and animals and materials, the sound output of a speaker is derived from an electrical signal. This electrical signal, like in other electrical appliances, ... at one Joule per second. This scale makes measuring of power output easy for commercial purposes.

Description : The product of antenna input power and the antenna power gain expressed in kW is called __. A. Effective Radiated Power (ERP) B. Effective Isotropic Radiated Power (EIRP) C. Radiated Power D. Transmit Power

Last Answer : A. Effective Radiated Power (ERP)

Description : How does a SSB transmitter output power normally expressed? A. Average power B. In terms of peak envelop power C. In terms of peak-to-peak power D. Peak power

Last Answer : B. In terms of peak envelop power

Description : What is the front-to-back ratio of an antenna which radiates 500 watts in a northernly direction and 50 watts in a southernly direction? A. 25000 dB B. 10 dB C. 100 dB D. 20 dB

Last Answer : B. 10 dB

Description : A properly matched transmission line has a loss of 1.5 dB/100m. if 10 W is supplied to one end of the line, how many watts reach the load, 27 m away? A. 10 W B. 7.2 W C. 9.9 W D. 9.1 W

Last Answer : D. 9.1 W

Description : When adjusting an RF filter on a transmitter using a dummy load, how much watts dissipation should it stand to test a 150 watts transmitter? A. 75 watts B. 300 watts C. 50 watts D. 150 watts

Last Answer : D. 150 watts

Description : What is the equivalent output of a circuit in dBm, if it is has an output of 10 watts? A. 10 dBm B. 30 dBm C. 20 dBm D. 40 dBm

Last Answer : D. 40 dBm

Description : An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from ... cost (B) Depreciation by sinking fund method (C) Discrete compound interest (D) Cash ratio

Last Answer : (B) Depreciation by sinking fund method

Description : Cable attenuation is usually expressed in terms of a. Loss per foot b. dB/km c. intensity per mile d. voltage drop per inch

Last Answer : b. dB/km

Description : Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput

Last Answer : D. Throughput

Description : Which is the proper measurement of average power emitted by a pulsed laser? a. Energy x time b. Pulse energy x repetition rate c. Pulse energy / repetition rate d. Peak power x pulse length

Last Answer : b. Pulse energy x repetition rate

Description : Is the rate in the portion formula always expressed with a percent symbol?

Last Answer : The portion is sometimes expressed with a percent symbol. trueor false

Description : The rate of energy transfer from a higher temperature to a lower temperature is measured in a) kcal b) Watt c) Watts per second d) none of the above.

Last Answer : b) Watt

Description : The rate at which electrical energy is used is measured in w) volts x) amperes y) joules z) watts

Last Answer : ANSWER: Z -- WATTS

Description : A definite amount of an ideal gas `(gamma = 1.5)` undergoes change of state in which heat exchange is equal to work done `(q=w)`. Molar heat capacity

Last Answer : A definite amount of an ideal gas `(gamma = 1.5)` undergoes change of state in which heat exchange is equal to work ... : A. 2R B. 3R C. R D. `3/2R`

Description : The problem of powdery mildew ? The problem was from childhood. Playing solas would have reduced it. It would have taken a few months like this. But now it has taken a definite shape. Lots of ... state of insanity. I am seeking the advice of an experienced person. I am currently 25 years old.

Last Answer : You are not a homeopath. Complete the dose of the medicine regularly on the advice of a doctor in the medicine department. And if you take worm medicine after every 3 months, then there will be no more worms. Wash your hands thoroughly with soap or ash after defecation.

Description : What is meant by the term radiation resistance for an antenna? A. The resistance in the trap coils to received signal B. An equivalent resistance that would dissipate the same amount of power as ... antenna C. The specific impedance of the antenna D. Losses in the antenna elements and feed line

Last Answer : B. An equivalent resistance that would dissipate the same amount of power as that radiated from an antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : The first law of thermodynamics may be expressed in the following equivalent  a. the net heat transfer id equal to the network  b. the sum of the total energy forms leaving the system boundary is ... neither be created nor destroyed but only converted from one form to another  d. all of the above

Last Answer : all of the above

Description : Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these

Last Answer : (C) Proof

Description : if person hold a temporary post then which of the following statement equivalent for temporary post a. Post carrying a definite rate of pay sanctioned for a limited time b. posts carrying definite rate of pay sanctioned without limit of time c. None of these

Last Answer : a. Post carrying a definite rate of pay sanctioned for a limited time

Description : if a Government servant holds a posts carrying definite rate of pay sanctioned without limit of time Then it may be treated as a. Post under probation period b. Post may be treated as Permanent c. Post may be treated as provisional

Last Answer : b. Post may be treated as Permanent

Description : Speaker is a device that __________. A. convert current variations into sound waves B. none of these C. convert electrical energy to mechanical energy D. convert sound waves into current and voltage

Last Answer : A. convert current variations into sound waves

Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Last Answer : B. Sound intensity

Description : Which of the following is not a way of minimizing if not eliminating noise? A. Use redundancy B. Increase transmitted power C. Reduce signaling rate D. Increase channel bandwidth

Last Answer : D. Increase channel bandwidth

Description : What term is used to describe the definite discrete amounts of energy required to move an electron from a low shell to a higher shell?

Last Answer : Quanta.

Description : Draw power and control circuit for definite time-limit starter for slip-ring induction motor. Explain its working.

Last Answer : Definite Time-limit Starter for Slip-ring Induction Motor: This starter is used for automatic control of acceleration of slip-ring induction motor at the time of starting. In this starter, the ... each phase, shorting the rotor winding terminals and final acceleration of the motor takes place. 

Description : _____ is the amount of uncertainty in a system of symbols A. Bandwidth B. Enthalpy C. Entropy D. Quantum

Last Answer : C. Entropy

Description : What causes the maximum usable frequency to vary? A. The temperature of the ionosphere B. The speed of the winds in the upper atmosphere C. The type of weather just below the ionosphere D. The amount of radiation received from the sun

Last Answer : D. The amount of radiation received from the sun

Description : If temperature change is 19°C, what amount of change to sound velocity is possible? A. 11.53 ft/s B. 11.53 m/s C. 19.304 ft/s D. 19.304 m/s

Last Answer : B. 11.53 m/s