Description : How much power (roughly) a light emitting diode can couple into an optical fiber? a. 100 microwatts b. 440 microwatts c. 100 picowatts d. 10 miliwatts
Last Answer : 100 microwatts
Description : What is the effective radiated power of a repeater with 100 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 800 W B. 126 W C. 12.5 W D. 1260 W
Last Answer : B. 126 W
Description : The power fed to a two-bay turnstile antenna is 100 watts. If the antenna has a 2 dB power gain, what is the effective radiated power? A. 317 watts B. 158 watts C. 200 watts D. 400 watts
Last Answer : B. 158 watts
Description : If a transmission line has a power loss of 6 dB per 100 feet, what is the power at the feed point to the antenna at the end of a 200 foot transmission line fed by a 100 watt transmitter? A. 70 watts B. 50 watts C. 25 watts D. 6 watts
Last Answer : D. 6 watts
Description : What is the front-to-back ratio of an antenna which radiates 500 watts in a northernly direction and 50 watts in a southernly direction? A. 25000 dB B. 10 dB C. 100 dB D. 20 dB
Last Answer : B. 10 dB
Description : What is the effective radiated power of a repeater with 200 watts transmitter power output, 4 dB feline loss, 4 dB duplexer and circulator loss, and 10 dB antenna gain? A. 317 W B. 2000 W C. 126 W D. 260 W
Last Answer : A. 317 W
Description : What is the effective radiated power of a repeater with 75 watts transmitter power output, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 10 dB antenna gain? A. 600 W B. 75 W C. 18.75 W D. 150 W
Last Answer : D. 150 W
Description : The speech coding rate in D-AMPS is ____. A. 8 kbps B. 13 kbps C. 15 kbps D. 20 kbps
Last Answer : A. 8 kbps
Description : In GSM cellular system, the speech coding rate is ____. A. 13 kbps B. 8 kbps C. 15 kbps D. 20 kbps
Last Answer : A. 13 kbps
Description : An amplifier has input power of 2 microwatts. The power gain of the amplifier is 60 dB. The output power will be
Last Answer : An amplifier has input power of 2 microwatts. The power gain of the amplifier is 60 dB. The output power will be 2 watts
Description : What is the effective radiated power of a repeater with 120 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 601 W B. 240 W C. 60 W D. 379 W
Last Answer : C. 60 W
Description : What is the effective radiated power of a repeater with 75 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 6 dB antenna gain? A. 37.6 W B. 237 W C. 150 W D. 23.7 W
Last Answer : A. 37.6 W
Description : What is the effective radiated power of a repeater with 50 watts transmitter power output, 5 dB feedline loss, 4 dB duplexer and circulator loss, and 7 dB antenna gain? A. 300 W B. 315 W C. 31.5 W D. 69.9 W
Last Answer : C. 31.5 W
Description : What is the effective radiated power of a repeater with 50 watts transmitter power output \, 4 dB feedline loss, 3 dB duplexer and circulator loss, and 6 dB antenna gain? A. 158 W B. 39.7 W C. 251 W D. 69.9 W
Last Answer : B. 39.7 W
Description : A coaxial cable has 7dB of reflected power when the input is 5 watts. What is the output of the transmission line? A. 5 watts B. 2.5 watts C. 1.25 watts D. 1 watt
Last Answer : D. 1 watt
Description : Determine the effective radiated power of 20 kW TV broadcast transmitter whose antenna has a field gain of 2. A. 40 kW B. 80,000 watts C. 40,000 watts D. 8,000 watts
Last Answer : B. 80,000 watts
Description : ECE Board Exam November 1996 What is the applied power if a thermal RF wattmeter is connected to a transmitter through a variable attenuator? The wattmeter reads 84 mW when 15 dB of attenuation is used. A. 4.656 watts B. 2.656 watts C. 3.656 watts D. 2.856 watts
Last Answer : B. 2.656 watts
Last Answer : A. PAM
Description : Power is always __________. A. a definite amount of energy B. all of these C. the rate at which energy is used D. expressed in watts
Last Answer : B. all of these
Description : A properly matched transmission line has a loss of 1.5 dB/100m. if 10 W is supplied to one end of the line, how many watts reach the load, 27 m away? A. 10 W B. 7.2 W C. 9.9 W D. 9.1 W
Last Answer : D. 9.1 W
Description : What is the equivalent output of a circuit in dBm, if it is has an output of 10 watts? A. 10 dBm B. 30 dBm C. 20 dBm D. 40 dBm
Last Answer : D. 40 dBm
Description : If an antenna has a gain of 3 dB, it increases the output of the transmitter by A. 10,000 times B. 1000 times C. 100 times D. 1 million times
Last Answer : B. 1000 times
Description : This type of transmission permits communication in the frequency range from 30 to 60 MHz and over distances from about 1000 to 2000 km. A. Troposcatter B. Ionospheric scatter C. Ducting D. Microwave
Last Answer : B. Ionospheric scatter
Description : Type of transmission path that permits communication in the frequency range from 30 to 60 MHz and over distances form about 1000 to 2000 km. A. Ducting B. Ionospheric scatter C. Microwave D. Troposcatter
Description : The approximate single-hop nighttime range of F2 layer is ____. A. 3000 km B. 3840 km C. 4130 km D. 2350km
Last Answer : C. 4130 km
Description : When adjusting an RF filter on a transmitter using a dummy load, how much watts dissipation should it stand to test a 150 watts transmitter? A. 75 watts B. 300 watts C. 50 watts D. 150 watts
Last Answer : D. 150 watts
Description : What is the standard test tone used for audio measurements? A. 100 Hz B. 500 Hz C. 1000 Hz D. 2000 Hz
Last Answer : C. 1000 Hz
Description : How much louder is 80 phons over 60 phons? A. 1000 times B.4 times louder C. 100 times D. Twice as loud
Last Answer : B.4 times louder
Description : Flicker noise is a poorly understood form of noise which may be completely ignored about above ____. A.100 Hz B. 200 Hz C. 400 Hz D. 500 Hz
Last Answer : D. 500 Hz
Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000
Last Answer : (D) 5000-15000
Description : Electro-magnetic spectrum range, which is important for radiation varies from __________ microns. (A) 1 to 100 (B) 0.5 to 50 (C) 10 to 100 (D) 100 to 1000
Last Answer : (B) 0.5 to 50
Description : Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000
Last Answer : A) 2 to 3
Description : The concentration of carbon dioxide in the atmosphere is in the range of: w) 1-10 parts per million x) 10-100 parts per million y) 100-1000 parts per million z) 1000-10,000 parts per million
Last Answer : ANSWER: Y -- 100-1000 PARTS PER MILLION (the exact number is 350 ppm as of the time of this article)
Description : The product of the radiated RF power of a transmitter and the gain of the antenna system in a given direction relative to an isotropic radiator is called ____. A. Effective Radiated Power (ERP) B. Effective Isotropic Radiated Power (EIRP) C. Radiated Power D. Transmit Power
Last Answer : B. Effective Isotropic Radiated Power (EIRP)
Description : How many amps in a 1000 watts at 110 volts ac?
Last Answer : 9 amps would be the answer.
Description : How many watts is 1000 MA?
Last Answer : Watts, a measure of electrical power) is a function of (dependson) current and voltage as in watts = current (MA) * Volts. Sinceno voltage was given, the question can not be answeredproperly.If the voltage was ... as1000 MA), it would be 100 watts. If it was 10 Volts, the answerwould be 10 Watts.
Description : A 1000 watts heater is connected to a 240 V AC Supply. Then the current drawn by the heater is
Last Answer : A 1000 watts heater is connected to a 240 V AC Supply. Then the current drawn by the heater is 4.166 amperes
Description : 1 Erlang is ______. A. 1000 TU B. 10 TU C. 100TU D. 1 TU
Last Answer : D. 1 TU
Description : In cellular system, the average lead time to install a new base station is approximately ____ months to a year. A. 4 B. 5 C. 6 D. 10
Last Answer : C. 6
Description : Two 100 watt light bulbs are connected in parallel across a 100 volt power supply. The total power developed in the circuit is _______________. A. 200 watts B. 100 watts C. 50 watts D. equal to the product of the amperes times the voltage in each branch
Last Answer : Answer: A
Description : An electric clothes dryer is connected to a 100-volt source. How much current does it use if it requires 2,000 watts of electric power?
Last Answer : 20 Amphere
Description : Two identical resistors are connected in parallel and consume 200 watts together. A third identical resistor is added in parallel. The total power consumed is: w) 100 watts x) 200 watts y) 300 watts z) 400 watts
Last Answer : ANSWER: Y -- 300 WATTS
Description : A waveguide termination having VSWR of 1.1 is used to dissipate 100 watts of power. The reflected power will be A) 0.2268 W B) 0.5868 W C) 0.3468 W D) 0.4568 W
Last Answer : A waveguide termination having VSWR of 1.1 is used to dissipate 100 watts of power. The reflected power will be 0.2268 W
Description : What is antenna bandwidth? A. Antenna length divided by the number of elements B. The angle between the half-power radiation points C. The angle formed between two imaginary lines drawn through D. The frequency range over which an antenna can be expected to operate satisfactorily
Last Answer : D. The frequency range over which an antenna can be expected to operate satisfactorily
Description : A low power, short range wireless technology designed to provide a replacement for serial cables is called ______. A. WAP B. GPRS C. Bluetooth D. EDGE
Last Answer : C. Bluetooth
Description : What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna ... perform well D. The angle formed between two imaginary line drawn through the ends of the elements
Last Answer : C. The frequency range over which and antenna can be expected to perform well
Description : What is the optimum volume per person of rooms for speech? A. 2.8 B. 3.1 C. 4.2 D. 5.1
Last Answer : A. 2.8
Description : What is considered the most obvious conveyor of information? A. Sound B. Speech C. Music D. Noise
Last Answer : B. Speech
Description : A method of expressing the amplitude of complex non-periodic signals such as speech. A. Frequency B. Wavelength C. Volume D. Pitch
Last Answer : C. Volume
Description : ______ used to measure speech volume A. Volume meter B. Audio frequency meter C. Volume unit meter D. Speech meter
Last Answer : C. Volume unit meter