Differentiate between belt drive and gear drive.

Differentiate between belt drive and gear drive. 
by

1 Answer

Answer :

Difference between Belt and Gear Drive:

Basis
Belt Drive
Gear Drive
Power transmitting capacity
Less
High
Slip & Creep 
Occurs
No
Material used
Flexible in nature
Rigid material used 
Type of drive 
Slip drive 
Positive drive 
Centre distance between the shafts
Medium or large 
Very less
Overload taking capacity
Slips when overloaded 
Damages when overloaded
Velocity Ratio
Does not remain constant
Remain constant
Use
Low to moderate power transmission 
High power transmission
by

Related questions

How do I fix Drive gear on axle of my snowblower?

Description : How do I fix Drive gear on axle of my snowblower?

Last Answer : Feel Free to Answer

Describe the construction of gear drive of camshaft drive arrangement with sketch.

Description : Describe the construction of gear drive of camshaft drive arrangement with sketch.

Last Answer : Gear Drive of Camshaft Drive: Camshaft is driven by the crankshaft either by a pair of meshing gears (timing gears) or by means of a pair of timing sprocket connected by a chain ... and crankshaft to ensure opening the valves exactly at the correct time in relation to piston position. 

Give applications of gear drive.

Description : Give applications of gear drive.

Last Answer : 1) Gear box of vehicle 2)Machine tool 3)Gear mechanism of wrist watch 4) Dial Indicator 5) Cement mixing unit 4) Diff. Mechanism of automobiles 

When you get into your car to drive, do you strap the seat belt and then turn the key, or do you turn the car on first and then strap in?

Description : When you get into your car to drive, do you strap the seat belt and then turn the key, or do you turn the car on first and then strap in?

Last Answer : The vehicles that I use for transportation have no seatbelts.

replace drive belt on a 2006 wildfire scooter

Description : replace drive belt on a 2006 wildfire scooter

Last Answer : Need Answer

How do I replace the mower drive belt on a Cub Cadet 1042LT lawn tractor?

Description : How do I replace the mower drive belt on a Cub Cadet 1042LT lawn tractor?

Last Answer : Release the mowing deck. Lift the mowing deck to gain access to the underside of the tractor. Pull the old belt off the engine pulley. Remove the retainer clip holding the pulley bolt and the ... idler pulley and then around the engine pulley. Replace the deck housing and then the retainer springs.

If i have a time belt leak how long can i drive?

Description : If i have a time belt leak how long can i drive?

Last Answer : I have a timing belt leak, can I continue to drive

What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Last Answer : L = 2C + 1.57 (D +d ) + (D+d)2/ 4C

What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Last Answer : L = 2C + 1.57 (D + d) + (D-d)2 /4C

Write Short Notes On Creep And Slip In Belt Drive?

Description : Write Short Notes On Creep And Slip In Belt Drive?

Last Answer :  The movement of belt upon the face of rim or outer surface of driver and driven pulleys within the area of arc of contact is called creep in belt drive.  If the belt is loosely fitted on pulleys, it slips down which is called slip in belt drive.

What Is Dressing In Belt Drive?

Description : What Is Dressing In Belt Drive?

Last Answer : To avoid slip or creep, the resin powder or paste is poured in between the outer surface of pulley and belt for increasing the tension is called dressing.

Define Crowning In Belt Drive?

Description : Define Crowning In Belt Drive?

Last Answer : The outer surface or face of rim of the pulley is made in convex form to keep the belt in center when it is in movement, it is called crowning.

What Is Meant By A Belt Drive?

Description : What Is Meant By A Belt Drive?

Last Answer : When power is driven from driver pulley to driven pulley by means of belt , it is known as belt drive. In open belt drive both the pulleys run in the same direction and in cross belt drive both the pulleys run in opposite direction to each other.

is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Description : is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Last Answer : V-Belt

The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Description : The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Last Answer : a. Belt drive

Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Description : Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Last Answer : a) gears

Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Description : Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Last Answer : d. all the above

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Description : When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : a) Safety jump clutch

When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : b) Shear device

V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Description : V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Compare Belt Drive and Chain Drive

Description : Compare Belt Drive and Chain Drive

Last Answer : Particulars Belt drive Chain drive Slip Slip may occur No slip (Positive drive) Use For low Velocity Ratio For moderate Velocity Ratio Suitability For ... Installation cost Less Moderate Example Floor Mill, Compressor, Conveyors  Bicycle, Automobile