is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt
by

1 Answer

Answer :

V-Belt
by

Related questions

When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : a) Safety jump clutch

When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : b) Shear device

A power tiller consist of the following main components a) Engine c) Transmission gear b) Clutch d) All of the above

Description : A power tiller consist of the following main components a) Engine c) Transmission gear b) Clutch d) All of the above

Last Answer : All of the above

Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Description : Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Last Answer : a) gears

What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Last Answer : L = 2C + 1.57 (D + d) + (D-d)2 /4C

The device for engaging and disengaging the power shaft from the gearbox is known as 1. shaft 2. Gear 3. Clutch 4. circuit

Description : The device for engaging and disengaging the power shaft from the gearbox is known as 1. shaft 2. Gear 3. Clutch 4. circuit

Last Answer : ans 3

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Description : The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Last Answer : a. 30?

What Are The Advantages And Disadvantages Of V Belt?

Description : What Are The Advantages And Disadvantages Of V Belt?

Last Answer :  The main advantages of V belt are it has more gripping power, long life and it occupies less space.  Disadvantages are it is not fit for long distances and cross belt drive.

V-Belt has efficiency and its works as a Shock absorber. a. Low c) High b. Very low d) Very High

Description : V-Belt has efficiency and its works as a Shock absorber. a. Low c) High b. Very low d) Very High

Last Answer : High

What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Last Answer : L = 2C + 1.57 (D +d ) + (D+d)2/ 4C

Write Short Notes On Creep And Slip In Belt Drive?

Description : Write Short Notes On Creep And Slip In Belt Drive?

Last Answer :  The movement of belt upon the face of rim or outer surface of driver and driven pulleys within the area of arc of contact is called creep in belt drive.  If the belt is loosely fitted on pulleys, it slips down which is called slip in belt drive.

What Is Dressing In Belt Drive?

Description : What Is Dressing In Belt Drive?

Last Answer : To avoid slip or creep, the resin powder or paste is poured in between the outer surface of pulley and belt for increasing the tension is called dressing.

Define Crowning In Belt Drive?

Description : Define Crowning In Belt Drive?

Last Answer : The outer surface or face of rim of the pulley is made in convex form to keep the belt in center when it is in movement, it is called crowning.

What Is Meant By A Belt Drive?

Description : What Is Meant By A Belt Drive?

Last Answer : When power is driven from driver pulley to driven pulley by means of belt , it is known as belt drive. In open belt drive both the pulleys run in the same direction and in cross belt drive both the pulleys run in opposite direction to each other.

The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Description : The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Last Answer : a. Belt drive

When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Description : When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Description : V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Explain Briefly The Use Of Clutch?

Description : Explain Briefly The Use Of Clutch?

Last Answer : Clutch is used to connect and disconnect the driving and driven units of a machine. It does the function when machine speed is changed after stopping the driving unit.

Hand rotary duster consists basically of a blower completely with ..........and a hopper. a. Clutch. c. Flywheel. d. None of above Ans- b. gearbox

Description : Hand rotary duster consists basically of a blower completely with ..........and a hopper. a. Clutch. c. Flywheel. d. None of above Ans- b. gearbox

Last Answer : Ans-    b. gearbox

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Description : When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Last Answer : If the clutch is totally worn out there is nothing left.

When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Description : When the clutch disc is totally worn out about how much more torque carrying capacity is left in the clutch than the engine can deliver?

Last Answer : If the clutch is totally worn out there is nothing left.

whats the average price (Labor only) to installed a clutch on a pathfinder 4by4 v6 engine 5 speed transmission?

Description : whats the average price (Labor only) to installed a clutch on a pathfinder 4by4 v6 engine 5 speed transmission?

Last Answer : The average cost is about $700 for the labor only.

In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Description : In vehicle flywheel is place between 1. clutch and propeller shaft 2. engine and clutch 3. before engine 4. propeller shaft and differential

Last Answer : 2. engine and clutch

In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine

Description : In vehicles, flywheel is placed in between (A) Engine and clutch (B) Clutch and Propeller shaft (C) Propeller shaft and Differential (D) Before engine

Last Answer : (A) Engine and clutch

Which component of seed drill is used for transmit power to operate seed dropping mechanism. a) Frame b) Transport wheel c) Seed box d) Covering device

Description : Which component of seed drill is used for transmit power to operate seed dropping mechanism. a) Frame b) Transport wheel c) Seed box d) Covering device

Last Answer : Transport wheel

The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Last Answer : ans 2

type of connecting rod which is pinned to the crankshaft with the help of a pin, which helps to transmit the cut material. a) Pitman b) Cutter bat c) Shoe d) Wearing plate

Description : type of connecting rod which is pinned to the crankshaft with the help of a pin, which helps to transmit the cut material. a) Pitman b) Cutter bat c) Shoe d) Wearing plate

Last Answer : Pitman 

A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Last Answer : Ans - a. clutch

The formula for tension difference or effective pull, required to transmit the load at.... (a) (Tt-Ts)=1000(kw/V) (b) Tt/Ts=c^ke (c) (Tt-Ts)= 1000(Hp/V) (d) None of the above

Description : The formula for tension difference or effective pull, required to transmit the load at.... (a) (Tt-Ts)=1000(kw/V) (b) Tt/Ts=c^ke (c) (Tt-Ts)= 1000(Hp/V) (d) None of the above

Last Answer : (a) (Tt-Ts)=1000(kw/V)

In 2007 ____________ announced its plan to transmit its network to 4G standard LTE with joint efforts of Vodafone group. a) Verizon Wireless b) AirTouch c) Netflix d) V Cast

Description : In 2007 ____________ announced its plan to transmit its network to 4G standard LTE with joint efforts of Vodafone group. a) Verizon Wireless b) AirTouch c) Netflix d) V Cast

Last Answer : a) Verizon Wireless

What Are The Rules For Belt Drives?

Description : What Are The Rules For Belt Drives?

Last Answer :  The distance between two pulleys should not be less than three times the diameter of the larger pulley.  The slack side should be uppermost which may increase the arc of contact.  The ratio of ... should not exceed 6:1.  If necessary ,a jockey pulley should be used to minimize the slip.

What Are The Points To Be Noted When Selecting A Belt?

Description : What Are The Points To Be Noted When Selecting A Belt?

Last Answer :  Load of the machine.  Speed of the machine.  Capacity of machine.  Atmosphere of the climate.

What Are The Reasons For Slipping Of Belt?

Description : What Are The Reasons For Slipping Of Belt?

Last Answer :  The belt is loosely fitted.  Overloading on belt drive.  Misalignment of pulleys.

seed drill can be tested by a) sand bed method b) sticky belt methods c) both d) none of these Ans. c

Description : seed drill can be tested by a) sand bed method b) sticky belt methods c) both d) none of these Ans. c

Last Answer : ans c

The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Description : The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Last Answer : (A) Parabolic

What system in which there is no exchange of matter with the surrounding or mass does not cross its boundaries?  a. Open system  b. Closed system  c. Isolated system  d. Non-flow system

Description : What system in which there is no exchange of matter with the surrounding or mass does not cross its boundaries?  a. Open system  b. Closed system  c. Isolated system  d. Non-flow system

Last Answer : Closed system

What system in which neither mass nor energy cross the boundaries and is not influenced by the surroundings?  a. Closed system  b. Open system  c. Isolated system  d. All of these

Description : What system in which neither mass nor energy cross the boundaries and is not influenced by the surroundings?  a. Closed system  b. Open system  c. Isolated system  d. All of these

Last Answer : Isolated system

A classification of system in which mass does not cross its boundaries.  a. Nonflow System  b. Open System  c. Closed System  d. None of the above

Description : A classification of system in which mass does not cross its boundaries.  a. Nonflow System  b. Open System  c. Closed System  d. None of the above

Last Answer : Closed System

Only energy can cross the boundaries.  a. Closed system  b. Open system  c. Isolated system  d. Isoenergetic system

Description : Only energy can cross the boundaries.  a. Closed system  b. Open system  c. Isolated system  d. Isoenergetic system

Last Answer : Closed system

A system which consists of fixed amount of mass and no mass can cross its boundary called _____.  A. Equilibrium system  B. Thermal equilibrium system  C. Open system  D. Closed system

Description : A system which consists of fixed amount of mass and no mass can cross its boundary called _____.  A. Equilibrium system  B. Thermal equilibrium system  C. Open system  D. Closed system

Last Answer : Closed system

An open system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both energy and mass cross the boundaries of the system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Description : An open system is one in which  (a) mass does not cross boundaries of the system, though energy may do so  (b) neither mass nor energy crosses the boundaries of the system  (c) both energy ... system  (d) mass crosses the boundary but not the energy  (e) thermodynamic reactions do not occur.

Last Answer : Answer : c

I have 1997 Subaru Legacy Outback. If the timing belt breaks, will it destroy the engine? I've heard some engines will be destroyed, while others will not.

Description : I have 1997 Subaru Legacy Outback. If the timing belt breaks, will it destroy the engine? I've heard some engines will be destroyed, while others will not.

Last Answer : It may break possibly causing serious engine damage. When a timing belt breaks, the camshaft stops turning leaving some of the valves in the open position. The crankshaft, because it's heavier, ... done or engine getting destroyed and needing a new engine half way through your trip . good luck

Is it worth doing the car if the engine timing belt is torn in it?

Description : The mechanic said no, because it costs 200-400 thousand, but a similar used car (11 years, 130 thousand km) set 1-1.5 million ft

Last Answer : I think it's definitely worth doing if the car is worth more than double the investment, as buying another similar vehicle would be an even bigger investment. Otherwise, it would be worthwhile to inquire about ... you may find an engine for 100,000 HUF, and then the car can be repaired even cheaper.

Can a doctor exempt you from wearing a seat belt? (Cross Test)

Description : Yes, if you provide proof that wearing the belt is detrimental to you for health reasons. No.   

Last Answer : Yes, if you can prove that wearing the belt is detrimental to you for health reasons. Explanation: This test question is usually spoiled because one has not been able to grant an exemption for two years. (cross test / Category B / Things to do before departure)

The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Last Answer : (A) Speed

(v) The theory of the Arab origin is supported by the long coat with embroidered waist-belt they wear. (para 3) -Other

Description : (v) The theory of the Arab origin is supported by the long coat with embroidered waist-belt they wear. (para 3) -Other

Last Answer : (v) draws support from

The V-belt on the washing machine slips

Description : Is there anything you can do about it? Or does he have to buy a new one? Sometimes when the washing machine is full it slips.

Last Answer : For most washing machines, you just need to put it on.

The maximum V belt sag when applying finger pressure is a) 10 mm b) 12 mm c) 15 mm d) 17 mm

Description : The maximum V belt sag when applying finger pressure is a) 10 mm b) 12 mm c) 15 mm d) 17 mm

Last Answer : c) 15 mm