Compare Belt Drive and Chain Drive

Compare Belt Drive and Chain Drive
by

1 Answer

Answer :

Particulars
Belt drive
Chain drive
Slip
Slip may occur
No slip (Positive drive)
Use
For low Velocity Ratio
For moderate Velocity Ratio
Suitability
For large centre distance
For moderate centre distance
Space requires
Large
Moderate
Lubrication
Not required
Require
Installation cost
Less
Moderate
Example
Floor Mill, Compressor, Conveyors 
Bicycle, Automobile
by

Related questions

The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Description : The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Last Answer : a. Belt drive

Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Description : Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Last Answer : a) gears

Does a toyota 4 runner have a timing belt or a timing chain?

Description : Does a toyota 4 runner have a timing belt or a timing chain?

Last Answer : Timing belt

Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Last Answer : (C) Flight conveyor

The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Description : The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Last Answer : d) Belt pulleys and chain sprocket

When you get into your car to drive, do you strap the seat belt and then turn the key, or do you turn the car on first and then strap in?

Description : When you get into your car to drive, do you strap the seat belt and then turn the key, or do you turn the car on first and then strap in?

Last Answer : The vehicles that I use for transportation have no seatbelts.

replace drive belt on a 2006 wildfire scooter

Description : replace drive belt on a 2006 wildfire scooter

Last Answer : Need Answer

How do I replace the mower drive belt on a Cub Cadet 1042LT lawn tractor?

Description : How do I replace the mower drive belt on a Cub Cadet 1042LT lawn tractor?

Last Answer : Release the mowing deck. Lift the mowing deck to gain access to the underside of the tractor. Pull the old belt off the engine pulley. Remove the retainer clip holding the pulley bolt and the ... idler pulley and then around the engine pulley. Replace the deck housing and then the retainer springs.

If i have a time belt leak how long can i drive?

Description : If i have a time belt leak how long can i drive?

Last Answer : I have a timing belt leak, can I continue to drive

What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Last Answer : L = 2C + 1.57 (D +d ) + (D+d)2/ 4C

What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Last Answer : L = 2C + 1.57 (D + d) + (D-d)2 /4C

Write Short Notes On Creep And Slip In Belt Drive?

Description : Write Short Notes On Creep And Slip In Belt Drive?

Last Answer :  The movement of belt upon the face of rim or outer surface of driver and driven pulleys within the area of arc of contact is called creep in belt drive.  If the belt is loosely fitted on pulleys, it slips down which is called slip in belt drive.

What Is Dressing In Belt Drive?

Description : What Is Dressing In Belt Drive?

Last Answer : To avoid slip or creep, the resin powder or paste is poured in between the outer surface of pulley and belt for increasing the tension is called dressing.

Define Crowning In Belt Drive?

Description : Define Crowning In Belt Drive?

Last Answer : The outer surface or face of rim of the pulley is made in convex form to keep the belt in center when it is in movement, it is called crowning.

What Is Meant By A Belt Drive?

Description : What Is Meant By A Belt Drive?

Last Answer : When power is driven from driver pulley to driven pulley by means of belt , it is known as belt drive. In open belt drive both the pulleys run in the same direction and in cross belt drive both the pulleys run in opposite direction to each other.

is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Description : is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Last Answer : V-Belt

Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Description : Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Last Answer : d. all the above

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Description : When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : a) Safety jump clutch

When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : b) Shear device

V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Description : V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Differentiate between belt drive and gear drive.

Description : Differentiate between belt drive and gear drive. 

Last Answer : Difference between Belt and Gear Drive: Basis Belt Drive Gear Drive Power transmitting capacity Less High Slip & Creep  Occurs No Material used ... remain constant Remain constant Use Low to moderate power transmission  High power transmission

How does the video storage of the Sony CCDTRV128 Hi8 Analog Handycam Camcorder compare to digital cameras that use dvd, mini dvd or hard drive to store video?

Description : How does the video storage of the Sony CCDTRV128 Hi8 Analog Handycam Camcorder compare to digital cameras that use dvd, mini dvd or hard drive to store video?

Last Answer : In terms of cost, you'll likely find it the least expensive of those types listed. In terms of the recording time possible, however, hard drives offer the most, while Hi8 tapes generally offer the least.

Compare individual and group drive on any four points.

Description : Compare individual and group drive on any four points.  

Last Answer : S.No. Point Individual Drive Group Drive 1 Definition In this type of drive each machine has its own separate electric drive (motor). It may be directly coupled ... Lathe Machine (Similar application will be consider) Textile Industry (Similar application will be consider)

Tension on the slack side in chain drive is A)more than on tight side. B)less than on tight side. C)zero. D)equal to tight

Description : Tension on the slack side in chain drive is A)more than on tight side. B)less than on tight side. C)zero. D)equal to tight

Last Answer : C)zero

Tension on slack side in case of chain drive a) Lesser than on tight side b) Greater than on tight side c) Zero d) Equal to that on tight side

Description : Tension on slack side in case of chain drive a) Lesser than on tight side b) Greater than on tight side c) Zero d) Equal to that on tight side

Last Answer : c) Zero

ate of wear chain drive system a) Directly related to speed of chain b) Inversely related to size of sprocket of chain length c) Both (a) and (b) d) None of the above

Description : ate of wear chain drive system a) Directly related to speed of chain b) Inversely related to size of sprocket of chain length c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Description : Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Last Answer : a) Rate of wear

The electron transport chain within the inner mitochondrial membrane creates a gradient of ____________ across the inner membrane which is utilized to drive the activity of ATP synthase and the generation of ATP.

Description : The electron transport chain within the inner mitochondrial membrane creates a gradient of ____________ across the inner membrane which is utilized to drive the activity of ATP synthase and the generation of ATP.

Last Answer : Hydrogen (H+ ions) or protons