What Is Meant By A Belt Drive?

What Is Meant By A Belt Drive?
by

1 Answer

Answer :

When power is driven from driver pulley to driven pulley by means of belt , it is known as belt drive. In open belt drive both the pulleys run in the same direction and in cross belt drive both the pulleys run in opposite direction to each other.
by

Related questions

What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In A Closed Belt Drive?

Last Answer : L = 2C + 1.57 (D +d ) + (D+d)2/ 4C

What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Description : What Is The Formula To Find Out The Length Of A Belt In An Open Belt Drive?

Last Answer : L = 2C + 1.57 (D + d) + (D-d)2 /4C

Write Short Notes On Creep And Slip In Belt Drive?

Description : Write Short Notes On Creep And Slip In Belt Drive?

Last Answer :  The movement of belt upon the face of rim or outer surface of driver and driven pulleys within the area of arc of contact is called creep in belt drive.  If the belt is loosely fitted on pulleys, it slips down which is called slip in belt drive.

What Is Dressing In Belt Drive?

Description : What Is Dressing In Belt Drive?

Last Answer : To avoid slip or creep, the resin powder or paste is poured in between the outer surface of pulley and belt for increasing the tension is called dressing.

Define Crowning In Belt Drive?

Description : Define Crowning In Belt Drive?

Last Answer : The outer surface or face of rim of the pulley is made in convex form to keep the belt in center when it is in movement, it is called crowning.

is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Description : is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt

Last Answer : V-Belt

The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Description : The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Last Answer : a. 30?

What Are The Advantages And Disadvantages Of V Belt?

Description : What Are The Advantages And Disadvantages Of V Belt?

Last Answer :  The main advantages of V belt are it has more gripping power, long life and it occupies less space.  Disadvantages are it is not fit for long distances and cross belt drive.

What Are The Rules For Belt Drives?

Description : What Are The Rules For Belt Drives?

Last Answer :  The distance between two pulleys should not be less than three times the diameter of the larger pulley.  The slack side should be uppermost which may increase the arc of contact.  The ratio of ... should not exceed 6:1.  If necessary ,a jockey pulley should be used to minimize the slip.

What Are The Points To Be Noted When Selecting A Belt?

Description : What Are The Points To Be Noted When Selecting A Belt?

Last Answer :  Load of the machine.  Speed of the machine.  Capacity of machine.  Atmosphere of the climate.

What Are The Reasons For Slipping Of Belt?

Description : What Are The Reasons For Slipping Of Belt?

Last Answer :  The belt is loosely fitted.  Overloading on belt drive.  Misalignment of pulleys.

seed drill can be tested by a) sand bed method b) sticky belt methods c) both d) none of these Ans. c

Description : seed drill can be tested by a) sand bed method b) sticky belt methods c) both d) none of these Ans. c

Last Answer : ans c

The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Last Answer : ans 2

V-Belt has efficiency and its works as a Shock absorber. a. Low c) High b. Very low d) Very High

Description : V-Belt has efficiency and its works as a Shock absorber. a. Low c) High b. Very low d) Very High

Last Answer : High

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

When you get into your car to drive, do you strap the seat belt and then turn the key, or do you turn the car on first and then strap in?

Description : When you get into your car to drive, do you strap the seat belt and then turn the key, or do you turn the car on first and then strap in?

Last Answer : The vehicles that I use for transportation have no seatbelts.

replace drive belt on a 2006 wildfire scooter

Description : replace drive belt on a 2006 wildfire scooter

Last Answer : Need Answer

How do I replace the mower drive belt on a Cub Cadet 1042LT lawn tractor?

Description : How do I replace the mower drive belt on a Cub Cadet 1042LT lawn tractor?

Last Answer : Release the mowing deck. Lift the mowing deck to gain access to the underside of the tractor. Pull the old belt off the engine pulley. Remove the retainer clip holding the pulley bolt and the ... idler pulley and then around the engine pulley. Replace the deck housing and then the retainer springs.

If i have a time belt leak how long can i drive?

Description : If i have a time belt leak how long can i drive?

Last Answer : I have a timing belt leak, can I continue to drive

The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Description : The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Last Answer : a. Belt drive

Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Description : Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Last Answer : a) gears

Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Description : Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Last Answer : d. all the above

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Description : When V-belt drive is used a safety device, its performance is affected by a) Variation in belt tention b) Increase in coefficient of friction as belt slippage increase c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : a) Safety jump clutch

When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Description : When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive

Last Answer : b) Shear device

V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Description : V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Compare Belt Drive and Chain Drive

Description : Compare Belt Drive and Chain Drive

Last Answer : Particulars Belt drive Chain drive Slip Slip may occur No slip (Positive drive) Use For low Velocity Ratio For moderate Velocity Ratio Suitability For ... Installation cost Less Moderate Example Floor Mill, Compressor, Conveyors  Bicycle, Automobile

Differentiate between belt drive and gear drive.

Description : Differentiate between belt drive and gear drive. 

Last Answer : Difference between Belt and Gear Drive: Basis Belt Drive Gear Drive Power transmitting capacity Less High Slip & Creep  Occurs No Material used ... remain constant Remain constant Use Low to moderate power transmission  High power transmission

What Do You Meant By Expansion Joint?

Description : What Do You Meant By Expansion Joint?

Last Answer : This joint is used to carry the piping system at high pressure. This joint is provided with gland and stuffing box which make the joint perfectly steam tight. To prevent leakage asbestos packing is provided.

What is meant by event drive programming ?

Description : What is meant by event drive programming ?

Last Answer : The programming instruction or instruction given through the diagram is called event drive programming. Events such as pressing a key on the corner of a keyboard , clicking a mouse point on a particular control ... in the corner. In this case Command is 'Control' or 'Control' and clicking 'Event'.

What is meant by four wheel drive car ?

Last Answer : Power is usually supplied from the engine to the rear two wheels of the vehicle. A car with four wheels (front and rear) for special needs is called a four-wheel drive vehicle.

The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Description : The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Last Answer : a.Backlash in gearing

How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Description : How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Last Answer : Work remains unaltered and volumetric efficiency decreases.

What Do You Mean A Worm Drive?

Description : What Do You Mean A Worm Drive?

Last Answer : Worm drive consists of a worm and worm wheel and the worm wheel is always driven by the worm. It is suitable for heavy loads and also for speed reduction.

Castor angle is essentially related to a) Drive wheels b) Steered wheels c) Towed wheels d) Self-propelled wheels Ans. b

Description : Castor angle is essentially related to a) Drive wheels b) Steered wheels c) Towed wheels d) Self-propelled wheels Ans. b

Last Answer : Ans. b

A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Last Answer : Ans - a. clutch