Rules governing the transmission of digital information. A. Line protocol B. Isochronous C. Data communications D. Digital communications

Rules governing the transmission of digital information.
A. Line protocol
B. Isochronous
C. Data communications
D. Digital communications
by

1 Answer

Answer :

B. Isochronous
by

Related questions

The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Last Answer : D. Data terminal equipment (DTE)

The information tobe communicated ina data communications system is the_______. A) Medium B) Protocol C) Message D) Transmission

Description : The information tobe communicated ina data communications system is the_______. A) Medium B) Protocol C) Message D) Transmission

Last Answer : Message

A protocol is a set of rules governing a time sequence of events that must take place a. between peers b. between an interface c. between modems d. across an interface

Description : A protocol is a set of rules governing a time sequence of events that must take place a. between peers b. between an interface c. between modems d. across an interface

Last Answer : between peers

------------------- is a set of rules governing the format and meaning of the packets, or messages that are exchanged by the peer entities within a layer. a. Interface b. Reference model c. Protocol d. None of these

Description : ------------------- is a set of rules governing the format and meaning of the packets, or messages that are exchanged by the peer entities within a layer. a. Interface b. Reference model c. Protocol d. None of these

Last Answer : c. Protocol

In telecommunications when we call data communications it means the transmission of________. A. Voice and video B. Voice C. Video D. Computer data

Description : In telecommunications when we call data communications it means the transmission of________. A. Voice and video B. Voice C. Video D. Computer data

Last Answer : D. Computer data

Which of the following is not a common microwave application? A. Radar B. Data transmission C. Space communications D. Mobile radio

Description : Which of the following is not a common microwave application? A. Radar B. Data transmission C. Space communications D. Mobile radio

Last Answer : D. Mobile radio

RS-232, RS-449, RS-530, V, 24 and X.21 are examples of ____________. A. standards for interfaces between modems and transmission facilities B. standards for various types of transmission channels C. standards for interfaces between terminals and modems D. standards for end to end performance of data communications system

Description : RS-232, RS-449, RS-530, V, 24 and X.21 are examples of ____________. A. standards for interfaces between modems and transmission facilities B. standards for various types of ... for interfaces between terminals and modems D. standards for end to end performance of data communications system

Last Answer : C. standards for interfaces between terminals and modems

The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications channel C. interface analog terminal equipment to digital communications channel D. interface digital terminal equipment to digital communications channel

Description : The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications ... to digital communications channel D. interface digital terminal equipment to digital communications channel

Last Answer : B. interface digital terminal equipment to analog communications channel

What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem D. C modem

Description : What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem D. C modem

Last Answer : B. X modem

What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem

Description : What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem

Last Answer : B. X modem

Set rules implementing and governing an orderly exchange of data between layers of two devices, such as line control units and front – end processors.

Description : Set rules implementing and governing an orderly exchange of data between layers of two devices, such as line control units and front – end processors.

Last Answer : Data Link Protocol

In what form does the information of data communications is transmitted between two points? A. Alphanumeric form B. Alphabetic form C. Numeric form D. Binary form

Description : In what form does the information of data communications is transmitted between two points? A. Alphanumeric form B. Alphabetic form C. Numeric form D. Binary form

Last Answer : D. Binary form

In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique

Description : The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique

Last Answer : C. determined by the sender and receiver

Which of the following is required to communicate between two computers? a. communications software b. protocol c. communication hardware d. all of above including access to transmission medium

Description : Which of the following is required to communicate between two computers? a. communications software b. protocol c. communication hardware d. all of above including access to transmission medium

Last Answer : all of above including access to transmission medium

DTP computer abbreviation usually means ? DeskTop Publishing Data Type Programming Digital Transmission Protocol None Of above

Description : DTP computer abbreviation usually means ? DeskTop Publishing Data Type Programming Digital Transmission Protocol None Of above

Last Answer : Data Type Programming

Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Description : Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Last Answer : B. channel

What is the main purpose of a communications system? A. None of these B. To have a frequency assignment C. For modulation D. To provide an acceptable replica of the information at the destination

Description : What is the main purpose of a communications system? A. None of these B. To have a frequency assignment C. For modulation D. To provide an acceptable replica of the information at the destination

Last Answer : D. To provide an acceptable replica of the information at the destination

Iridium satellites can provide data communications of up ____ bps data rate. A. 1200 B. 4800 C. 2400 D. 3840

Description : Iridium satellites can provide data communications of up ____ bps data rate. A. 1200 B. 4800 C. 2400 D. 3840

Last Answer : C. 2400

What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder

Description : What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder

Last Answer : C. TTC

The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : isochronous

___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug

Description : ___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug

Last Answer : C. Modem

ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits of data per character and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been the mainstay for data communications. 3). Point-to-Point Protocol (PPP) is a network-specific standard protocol with STD number 51. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Description : State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been ... . false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Last Answer : D. 1. true, 2. false, 3. true

Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Description : Sources of impulse noise induced in communication channels. A. Erroneous digital coding bit caused by an error on a transmission facility B. Transients due to relay operation C. Crosstalk from dc signaling systems D. All of these

Last Answer : D. All of these

What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Description : What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Last Answer : C. Propagation delay

Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than analog signals C. digital signals are smaller than analog signals and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Description : Digital transmission provides a higher level of signal quality than analog transmission because A. repeaters regenerate digital pulses and remove distorstion B. digital signals are easier to sample than ... and cannot easily be distorted D. analog signals are continuous and not easily distorted.

Last Answer : A. repeaters regenerate digital pulses and remove distorstion

In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Description : In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Last Answer : B. synchronous

ECE Board Exam March 1996 What is the IBM’s asynchronous data link protocol designation? A. 83 B B. 8A1 / 8B1 C. 93 B D. 9A1/ 9B1

Description : ECE Board Exam March 1996 What is the IBM’s asynchronous data link protocol designation? A. 83 B B. 8A1 / 8B1 C. 93 B D. 9A1/ 9B1

Last Answer : A. 83 B

Are their any rules governing who can place homes for sale or can you do it without a license?

Description : Are their any rules governing who can place homes for sale or can you do it without a license?

Last Answer : You don't have to have any sort of license to sell your own home. You do however have to have a real estate license to sell someone else's home.

The formal grammar rules governing the construction of valid instruction. a) test case b) syntax c) program d) semantics

Description : The formal grammar rules governing the construction of valid instruction. a) test case b) syntax c) program d) semantics

Last Answer : Answer: b Explanation: Syntax determines the grammatical rules in a code. Semantics give meaning to the instructions

The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted

Description : The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted

Last Answer : D. Type of information to be transmitted

The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier

Description : The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier

Last Answer : D. Type of modulation of the main carrier

The main benefit of light-wave communications over microwaves or any other communications media is a. Lower cost b. Better security c. Wider bandwidth d. Freedom from interference

Description : The main benefit of light-wave communications over microwaves or any other communications media is a. Lower cost b. Better security c. Wider bandwidth d. Freedom from interference

Last Answer : c. Wider bandwidth

Which of the following is used as an optical receiver in fiber optics communications a. APD b. Tunnel diode c. Laser diode d. LED

Description : Which of the following is used as an optical receiver in fiber optics communications a. APD b. Tunnel diode c. Laser diode d. LED

Last Answer : a. APD

Which of the following is used as an optical transmitter on the Fiber Optical Communications? a. APD b. LSA diode c. PIN diode d. LED

Description : Which of the following is used as an optical transmitter on the Fiber Optical Communications? a. APD b. LSA diode c. PIN diode d. LED

Last Answer : d. LED

Is a non-coherent light source foe optical communications system. a. ILD b. LED c. APD d. PIN Diode

Description : Is a non-coherent light source foe optical communications system. a. ILD b. LED c. APD d. PIN Diode

Last Answer : b. LED

Which does not use vertical polarization antenna? A. AM Broadcasting B. FM Broadcasting C. Mobile Communications D. Satellite Communications

Description : Which does not use vertical polarization antenna? A. AM Broadcasting B. FM Broadcasting C. Mobile Communications D. Satellite Communications

Last Answer : B. FM Broadcasting

Which of the following is the most common application of satellite? A. Surveillance B. Military application C. Communications D. Newscasting

Description : Which of the following is the most common application of satellite? A. Surveillance B. Military application C. Communications D. Newscasting

Last Answer : C. Communications

What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB

Last Answer : A. 198 dB

The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Description : The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Last Answer : B. bandpass filter

The satellite subsystem that monitors and controls the satellite is the A. propulsion subsystem B. power subsystem C. communications subsystem D. telemetry, tracking, and command subsystem

Description : The satellite subsystem that monitors and controls the satellite is the A. propulsion subsystem B. power subsystem C. communications subsystem D. telemetry, tracking, and command subsystem

Last Answer : D. telemetry, tracking, and command subsystem

The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Description : The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Last Answer : D. transponder

The main function of a communications satellite is a/ an A. repeater B. reflector C. beacon D. observation platform

Description : The main function of a communications satellite is a/ an A. repeater B. reflector C. beacon D. observation platform

Last Answer : A. repeater

The frequency of Ku band for satellite communications. A. 6/4 GHz B. 14/11 GHz C. 12/14 GHz D. 4/8 GHz

Description : The frequency of Ku band for satellite communications. A. 6/4 GHz B. 14/11 GHz C. 12/14 GHz D. 4/8 GHz

Last Answer : B. 14/11 GHz

Repeaters inside communications satellites are known as A. Trancievers B. Transponders C. Transducers D. TWT

Description : Repeaters inside communications satellites are known as A. Trancievers B. Transponders C. Transducers D. TWT

Last Answer : B. Transponders

Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C

Description : Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C

Last Answer : D. Both B and C

A large emission of hydrogen from the sun that affects communications. A. Solar flare B. Cosmic disturbance C. Ballistic disturbance D. Solar noise

Description : A large emission of hydrogen from the sun that affects communications. A. Solar flare B. Cosmic disturbance C. Ballistic disturbance D. Solar noise

Last Answer : A. Solar flare

Is the interference coming from other communications channels? A. Jitter B. Crosstalk C. RFI D. EMI

Description : Is the interference coming from other communications channels? A. Jitter B. Crosstalk C. RFI D. EMI

Last Answer : B. Crosstalk