What is the Mode of transmission of heat in which heat carried by a moving particles?

What is the Mode of transmission of heat in which heat carried by a moving
particles?
by

1 Answer

Answer :

Convection
by

Related questions

1. By whom were the members of the Constituent Assembly elected? 2. How much does one degree of the circumference of the earth measure (approx.)? 3. Which was the dynasty that succeeded the Chalukyas in Western India? 4. What is the Mode of transmission of heat in which heat carried by a moving particles? 5. Who are not protected against inflation?

Description : 1. By whom were the members of the Constituent Assembly elected? 2. How much does one degree of the circumference of the earth measure (approx.)? 3. Which was the dynasty that succeeded ... of High Court judges be reduced? 20. Which electromagnetic radiation is most prevalent in the atmosphere?

Last Answer : Answer : 1. By Provincial Assemblies 2. 111 km 3. Rashtrakutas 4. Convection 5. Agricultural farmers 6. Hamilton (Canada) 7. Decreases with height 8. Tanka 9. Cholera 10. 24 11. Efflorescence 12 ... 16. Plasma membrane 17. Cadiz (Spain) 18. Ramtanu Pande 19. During a Financial Emergency 20. Infrared

If the greatest velocity of the San Juan river in December 9 was 20 centimeters per second what was the approximate diameter of the largest particles that the river could have carried?

Description : If the greatest velocity of the San Juan river in December 9 was 20 centimeters per second what was the approximate diameter of the largest particles that the river could have carried?

Last Answer : Need answer

Electricity is carried within an atom by particles called _______.?

Description : Electricity is carried within an atom by particles called _______.?

Last Answer : electrons and protons

Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self cleansing velocity C. The sewers may be carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Description : Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self ... carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Last Answer : ANS: A

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles (A) Moving along straights (B) Turning left (C) Turning right (D) All the above

Description : At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles (A) Moving along straights (B) Turning left (C) Turning right (D) All the above

Last Answer : Answer: Option D

When do the particles stop moving across the membrane in diffusion?

Description : When do the particles stop moving across the membrane in diffusion?

Last Answer : Particles in a given medium stop moving across the membraneduring diffusion when a state of equilibrium is reached, that iswhen the number of particles on either side of the membraneequalizes.

What Energy produced by moving charged particles?

Description : What Energy produced by moving charged particles?

Last Answer : Feel Free to Answer

The Beta particles are fast moving------? A. Protons B. Electrons (Answer) C. Neutrons D. None

Description : The Beta particles are fast moving------? A. Protons B. Electrons (Answer) C. Neutrons D. None

Last Answer : B. Electrons (Answer)

According to the equation ‘r = (mv)⁄(Be)’, the faster moving particles A. move in smaller circle B. move straight C. move in bigger circle D. move randomly

Description : According to the equation ‘r = (mv)⁄(Be)’, the faster moving particles A. move in smaller circle B. move straight C. move in bigger circle D. move randomly

Last Answer : move in bigger circle

A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is at right angles to the magnetic field, describe the shape of the charged particle's path.

Description : A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is at right angles to the magnetic field, describe the shape of the charged particle's path.

Last Answer : ANSWER: CIRCULAR or CIRCLE

A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is parallel to the magnetic field, describe the shape of the charged particle's path.

Description : A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is parallel to the magnetic field, describe the shape of the charged particle's path. 

Last Answer : ANSWER: STRAIGHT LINE

If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the helm B. move in one direction only regardless of the movement of the helm C. not respond to output from the rotary actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Description : If the steering stand selector switch is allowed to remain in the 'Non-Followup' mode after testing of the steering gear, the rudder will _____________. EL-0097 A. not respond to commands from the ... actuator D. stop moving only when the helm is counter-rotated to put the pump at neutral stroke

Last Answer : Answer: A

Which of the following refers to the degree to which a transportation mode can provide equipment and conditions appropriate for moving specific kinds of goods? A)Reliability. B)Capability C)Capacity D)Accessibility E)Frequency

Description : Which of the following refers to the degree to which a transportation mode can provide equipment and conditions appropriate for moving specific kinds of goods? A)Reliability. B)Capability C)Capacity D)Accessibility E)Frequency

Last Answer : B)Capability

Mode of transmission of Hepatitis A -Biology

Description : Mode of transmission of Hepatitis A -Biology

Last Answer : answer:

Mode of transmission of Hepatitis B. -Biology

Description : Mode of transmission of Hepatitis B. -Biology

Last Answer : answer:

Which transmission mode can be compared to classroom reading ?

Description : Which transmission mode can be compared to classroom reading ?

Last Answer : Classroom reading can be compared to half duplex mode. Students remain silent while teachers are teaching in the classroom. Then the data goes from teacher to student. Later when the teacher is silent ... from the students to the teacher. So this data transmission can be compared to half duplex.

What kind of data transmission mode is used in video conferencing ?

Description : What kind of data transmission mode is used in video conferencing ?

Last Answer : Multicast mode is used in video conferencing.

What is Full Duplex Data Transmission Mode ?

Description : What is Full Duplex Data Transmission Mode ?

Last Answer : Full duplex data transmission mode means data can be transferred in both directions and at the same time. This means that the transmitting device and the receiving device can simultaneously send and receive information to each other. Duplex means monster.

What is the data transmission mode of mobile phone ?

Description : What is the data transmission mode of mobile phone ?

Last Answer : Full duplex in mobile phone data transmission mode. Full duplex transmission allows data to be sent and received at both ends at the same time. In this case, Edge can send and receive data anywhere at the same time. You can talk on both ends of the mobile phone at the same time.

What is data transmission mode in walkie-talkie ?

Description : What is data transmission mode in walkie-talkie ?

Last Answer : Half duplex in data transmission mode in walkie-talkie. The devices used in Half Duplex Maid are capable of both sending and receiving data. Half Duplex Maid has the opportunity to send data from both ... only receive or transmit data at the same time but cannot receive or transmit at the same time.

What is the most common type of data transmission mode ?

Description : What is the most common type of data transmission mode ?

Last Answer : The data transmission mode can be generally divided into three parts. These are: a. Simplex b . Half-Duplex c . Full-Duplex Simplex One-way data flow is called Simplex Maid. In this system, ... can receive data when sending data or send data when receiving data. Examples - telephone , mobile phone.

What is data transmission mode ?

Description : What is data transmission mode ?

Last Answer : The system of data exchange is called data transmission mode. In the case of data communication, the direction of the data is very important. In the case of data transfer during data communication, the direction of data flow is called data transmission mode.

Want to know about data transmission mode ?

Description : Want to know about data transmission mode ?

Last Answer : Data Transmission Mode In the case of data transfer from the sender to the receiver during data communication from the computer, the direction of data flow is termed as data transmission mode. The data ... data transfer flow i.e. directional features. Such as Simplex , Half -Duplex, Full -Duplex

What kind of data transmission mode to talk on mobile phone ?

Description : What kind of data transmission mode to talk on mobile phone ?

Last Answer : : Full Duplex Data Transmission Mode for Talking on Mobile Phones .

Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Last Answer : D. Packet mode

What is the mode of hereditary transmission of GPD deficiency?

Description : What is the mode of hereditary transmission of GPD deficiency? 

Last Answer : It is transmitted as an x-linked recessive character. 

Which of the following transmission systems provide the highest data rate to in individual device? a. computer bus b. telephone lines c. voice and mode d. lease lines

Description : Which of the following transmission systems provide the highest data rate to in individual device? a. computer bus b. telephone lines c. voice and mode d. lease lines

Last Answer : computer bus

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

A transmission mode that can transmit data in both the directions but transmits in only one direction at a time. a) simplex b) half duplex c) full duplex d) semi-duplex

Description : A transmission mode that can transmit data in both the directions but transmits in only one direction at a time. a) simplex b) half duplex c) full duplex d) semi-duplex

Last Answer : b) half duplex

The fecal-oral route is the mode of transmission for the _____. a. Hepatitis A virus. b. Hepatitis B virus. c. Hepatitis A and B viruses. d. All hepatitis viruses.

Description : The fecal-oral route is the mode of transmission for the _____. a. Hepatitis A virus. b. Hepatitis B virus. c. Hepatitis A and B viruses. d. All hepatitis viruses.

Last Answer : b. Hepatitis B virus.

The transmission mode which allows both communicating devices to transmit and receive data simultaneously is: a) Full Duplex b) Simplex c) Half Duplex d) Simple Complex e) None of These

Description : The transmission mode which allows both communicating devices to transmit and receive data simultaneously is: a) Full Duplex b) Simplex c) Half Duplex d) Simple Complex e) None of These

Last Answer : a) Full Duplex

Network Architecture refers to the layout of the network consisting of the hardware, software, connectivity, communication protocols and mode of transmission, such as ____: a) Wired b) Wireless c) Wired or Wireless d) None of These

Description : Network Architecture refers to the layout of the network consisting of the hardware, software, connectivity, communication protocols and mode of transmission, such as ____: a) Wired b) Wireless c) Wired or Wireless d) None of These

Last Answer : c) Wired or Wireless

The six elements necessary for infection are a causative organism, a reservoir of available organisms, a portal or mode of exit from the reservoir, a mode of transmission from reservoir to host, a susceptible host, and a a) mode of entry to host. The six elements necessary for infection are a causative organism, a reservoir of available organisms, a portal or mode of exit from the reservoir, a mode of transmission from reservoir to host, a susceptible host, and a mode of entry to host.

Description : The six elements necessary for infection are a causative organism, a reservoir of available organisms, a portal or mode of exit from the reservoir, a mode of transmission from reservoir to host, a ... of transmission from reservoir to host, a susceptible host, and a mode of entry to host.

Last Answer : a) mode of entry to host. The six elements necessary for infection are a causative organism, a reservoir of available organisms, a portal or mode of exit from the reservoir, a mode of transmission from reservoir to host, a susceptible host, and a mode of entry to host.

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

Which one of the following event is not possible in wireless LAN? a) collision detection b) acknowledgement of data frames c) multi-mode data transmission d) connection to wired networks

Description : Which one of the following event is not possible in wireless LAN? a) collision detection b) acknowledgement of data frames c) multi-mode data transmission d) connection to wired networks

Last Answer : a) collision detection

Compare characteristics of asynchronous and synchronous transmission mode.

Description : Compare characteristics of asynchronous and synchronous transmission mode (four points). 

Last Answer : Synchronous transmission Asynchronous transmission 1. Synchronous transmission are synchronized by an external clock. 1. Asynchronous transmission are synchronized by special signals along the transmission ... for transferring a small amount of data as it is simple and economical.

(a) Write one example for each of decomposion reaction carried out with help of (i) Electricity (ii) Heat (iii) Light (b) Which of the following statements is correct and why copper can displace silver from silver nitrate and silver can displace copper from copper sulphate solution. -Chemistry

Description : (a) Write one example for each of decomposion reaction carried out with help of (i) Electricity (ii) Heat (iii) Light (b) Which of the following statements is correct and why copper can displace silver from silver nitrate and silver can displace copper from copper sulphate solution. -Chemistry

Last Answer : Thi is the Answer:

Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. C. Shift the 'Q' point to increase collector current. D. Increase the potential difference between the emitter and the base.

Description : Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. ... point to increase collector current. D. Increase the potential difference between the emitter and the base.

Last Answer : Answer: B

Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness? A. Fill the motor housing with CO2 to inert the space. B. Strap silica gel around the commutator. C. Place heat lamps in the motor housings. D. Cover the equipment with a canvas tarpaulin.

Description : Which of the listed procedures should be carried out to prevent moisture damage to electrical apparatus during extended periods of idleness? A. Fill the motor housing with CO2 to inert the space. B. Strap ... C. Place heat lamps in the motor housings. D. Cover the equipment with a canvas tarpaulin.

Last Answer : Answer: C

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Description : An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Last Answer : (A) Maximum at the inlet of the reactor

A form of telecommunication for the transmission of transient images of fixed or moving objects. A. E-mail B. Television C. Radio D. Internet

Description : A form of telecommunication for the transmission of transient images of fixed or moving objects. A. E-mail B. Television C. Radio D. Internet

Last Answer : B. Television

When heat is removed, particles in a solid, liquid, or gas do what?

Description : When heat is removed, particles in a solid, liquid, or gas do what?

Last Answer : State Changes If you give the particles energy; or take energy away from them; then you can change their state. If you heat up a solid - you give it some energy. This causes the particles to move more and ... into a liquid, or melt. If the liquid is heated then it may evaporate and turn into a gas.

Airmass near to the earth's surface is warmer because it – (1) radiates heat (2) contains dust particles (3) is warmed by terrestrial radiation (4) is far from the sun

Description : Airmass near to the earth's surface is warmer because it – (1) radiates heat (2) contains dust particles (3) is warmed by terrestrial radiation (4) is far from the sun

Last Answer : (3) is warmed by terrestrial radiation Explanation: The air close to the ground is warmer because the earth's surface is what heats the atmosphere, for the most part. Terrestrial radiation accounts for ... Earth's surface. The further away from the earth's surface we go, the cooler the atmosphere.

Troposphere is the hottest part of the atmosphere because- (1) it is closest to the Sun (2) there are charged particles in it (3) it is heated by the Earth's surface (4) heat is generated in it

Description : Troposphere is the hottest part of the atmosphere because- (1) it is closest to the Sun (2) there are charged particles in it (3) it is heated by the Earth's surface (4) heat is generated in it

Last Answer : (3) it is heated by the Earth's surface Explanation: The lowest part of the troposphere is the warmest because it is closest to the ground, where the heat is coming from.

The purpose of lubrication in an antifriction bearing is (a) to reduce the friction between balls and races (b) dissipation of frictional heat prevention of corrosion (c) protection of the bearing from dirt and other foreign particles (d) all of the mentioned

Description : The purpose of lubrication in an antifriction bearing is (a) to reduce the friction between balls and races (b) dissipation of frictional heat prevention of corrosion (c) protection of the bearing from dirt and other foreign particles (d) all of the mentioned

Last Answer : (d) all of the mentioned