At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles (A) Moving along straights (B) Turning left (C) Turning right (D) All the above

At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles
(A) Moving along straights
(B) Turning left
(C) Turning right
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

As per recommendations of I.R.C., traffic volume study is carried out for rural roads for 7 days continuously during (A) Harvesting (B) Lean season (C) Harvesting and lean season (D) None of these

Description : As per recommendations of I.R.C., traffic volume study is carried out for rural roads for 7 days continuously during (A) Harvesting (B) Lean season (C) Harvesting and lean season (D) None of these

Last Answer : Answer: Option C

A traffic rotary is justified where (A) Number of intersecting roads is between 4 and 7 (B) Space is limited and costly (C) When traffic volume is less than 500 vehicles per hour (D) When traffic volume is more than 5000 vehicles per hour

Description : A traffic rotary is justified where (A) Number of intersecting roads is between 4 and 7 (B) Space is limited and costly (C) When traffic volume is less than 500 vehicles per hour (D) When traffic volume is more than 5000 vehicles per hour

Last Answer : Answer: Option A

Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Description : Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Last Answer : Answer: Option D

The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Description : The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Last Answer : Answer: Option D

For the movement of vehicles at an intersection of two roads, without any interference, the type of grade separator generally preferred to, is (A) Delta (B) Trumpet (C) Diamond interchange (D) Clover leaf

Description : For the movement of vehicles at an intersection of two roads, without any interference, the type of grade separator generally preferred to, is (A) Delta (B) Trumpet (C) Diamond interchange (D) Clover leaf

Last Answer : Answer: Option D

The number of vehicles moving in a specified direction on a roadway that pass a given point during specified unit of time, is called (A) Traffic volume (B) Traffic density (C) Basic capacity(D) Traffic capacity

Description : The number of vehicles moving in a specified direction on a roadway that pass a given point during specified unit of time, is called (A) Traffic volume (B) Traffic density (C) Basic capacity (D) Traffic capacity

Last Answer : Answer: Option A

Traffic census is carried out for (A) Speed and delay study(B) Road parking study (C) Traffic volume study (D) All the above

Description : Traffic census is carried out for (A) Speed and delay study (B) Road parking study (C) Traffic volume study (D) All the above

Last Answer : Answer: Option D

To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Description : To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Last Answer : Answer: Option D

When a driver stops at an intersection because traffic is backed up, German law requires the driver to leave enough space for vehicles on the intersecting street to clear the intersection.?

Description : When a driver stops at an intersection because traffic is backed up, German law requires the driver to leave enough space for vehicles on the intersecting street to clear the intersection.?

Last Answer : This isn't really a question. Just a statement. It makes sense to not block the intersection when there's traffic. I hate when people do that.

On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Description : On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Last Answer : Answer: Option C

Increase in traffic volume, due to increase in transport vehicles, is known as (A) Development traffic (B) Normal traffic growth (C) Generated traffic growth (D) Current traffic

Description : Increase in traffic volume, due to increase in transport vehicles, is known as (A) Development traffic (B) Normal traffic growth (C) Generated traffic growth (D) Current traffic

Last Answer : Answer: Option C

Gradient resistance of moving vehicles along down slopes, is (A) + 7 kg/tonne (B) + 9 kg/tonne (C) - 9 kg/tonne (D) - 7 kg/tonne

Description : Gradient resistance of moving vehicles along down slopes, is (A) + 7 kg/tonne (B) + 9 kg/tonne (C) - 9 kg/tonne (D) - 7 kg/tonne

Last Answer : Answer: Option C

Volume of traffic which is due to improvement carried out in adjacent area, is known as (A) Development traffic (B) Generated traffic growth (C) Normal traffic growth (D) Current traffic

Description : Volume of traffic which is due to improvement carried out in adjacent area, is known as (A) Development traffic (B) Generated traffic growth (C) Normal traffic growth (D) Current traffic

Last Answer : Answer: Option A

Describe the procedure of traffic volume count on any road intersection. Also write the method of representation of traffic volume count data.

Description : Describe the procedure of traffic volume count on any road intersection. Also write the method of representation of traffic volume count data.

Last Answer : The procedure of traffic volume count can be done by any of the methods below: a) Manual counting b) Automatic recorders c) Moving car method a) Manual counting: In this method, the ... Volume flow diagrams at intersection iii) Variation charts iv) Traffic flow map v) Traffic trend charts

Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Description : Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Last Answer : Answer: Option B

Driving vehicles on wet surfaced roads, is dangerous because it may (A) Skid (B) Slip (C) Overturn (D) All the above

Description : Driving vehicles on wet surfaced roads, is dangerous because it may (A) Skid (B) Slip (C) Overturn (D) All the above

Last Answer : Answer: Option B

If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Description : If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Last Answer : Answer: Option C

How often do you think those 18 wheel tractor trailers bang into waiting cars when they're turning left at an intersection in town?

Description : How often do you think those 18 wheel tractor trailers bang into waiting cars when they're turning left at an intersection in town?

Last Answer : They have to stop or they would lose their license. Trust me, they don’t want their day ruined by a wreck either. The paper work they have to fill out is crazy and all they are doing is trying to do their job to the best of their ability and to eek out a living.

Do you pull into the intersection to make a left hand turn? (US turning)

Description : Do you pull into the intersection to make a left hand turn? (US turning)

Last Answer : And just as another piece of information, looking back in my “Drivers ed” book, pulling into the intersection is what is taught. So this seems to be something that is the correct thing to do, not just something everyone does, so I’ll do it too.

What accounts for the homophobia in gay-bashing straights; and the heterophobia in straight-bashing gays?

Description : What accounts for the homophobia in gay-bashing straights; and the heterophobia in straight-bashing gays?

Last Answer : answer:Difference in opinion, the driving force behind pretty much every conflict evar. That said, there is no homophobia, neither is there heterophobia. Those (specifically homophpbia since it actually gets used) ... like, Those people must be crazy, so we don't have to pay them any attention.

For Indian conditions, the water bound macadam roads, are suitable if daily traffic does not exceed (A) 2000 tonnes (B) 2500 tonnes (C) 3000 tonnes (D) 3500 tonnes

Description : For Indian conditions, the water bound macadam roads, are suitable if daily traffic does not exceed (A) 2000 tonnes (B) 2500 tonnes (C) 3000 tonnes (D) 3500 tonnes

Last Answer : Answer: Option A

As per IRC recommendations, the average level of illumination on important roads carrying fast traffic is (A) 10 Lux (B) 15 Lux (C) 20 Lux (D) 30 Lux

Description : As per IRC recommendations, the average level of illumination on important roads carrying fast traffic is (A) 10 Lux (B) 15 Lux (C) 20 Lux (D) 30 Lux

Last Answer : Answer: Option D

If P is the number of vehicles per day at last census, r is the increase in traffic and n is the number of years passed after last census, number of vehicles A per day for design, is (A) P (1 + r)n (B) P (1 - r)n (C) P (1 + r)-n+5 (D) P (1 + r)5n

Description : If P is the number of vehicles per day at last census, r is the increase in traffic and n is the number of years passed after last census, number of vehicles A per day for design, is (A) P (1 + r)n (B) P (1 - r)n (C) P (1 + r)-n+5 (D) P (1 + r)5n

Last Answer : Answer: Option C

Maximum number of vehicles that can pass a given point on a lane during one hour without creating unreasonable delay, is known as (A) Traffic density of lane (B) Basic capacity of lane (C) Probable capacity of lane (D) Practical capacity of lane

Description : Maximum number of vehicles that can pass a given point on a lane during one hour without creating unreasonable delay, is known as (A) Traffic density of lane (B) Basic capacity of lane (C) Probable capacity of lane (D) Practical capacity of lane

Last Answer : Answer: Option D

The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Description : The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Last Answer : Answer: Option D

One-way streets are generally provided in crowded cities as, these (A) Are inexpensive means of traffic flow (B) Reduce delays to vehicles (C) Permit higher speed (D) All the above

Description : One-way streets are generally provided in crowded cities as, these (A) Are inexpensive means of traffic flow (B) Reduce delays to vehicles (C) Permit higher speed (D) All the above

Last Answer : Answer: Option D

Traffic surveys are carried out (A) To know the type of traffic (B) To determine the facilities to traffic regulations (C) To design proper drainage system (D) All the above

Description : Traffic surveys are carried out (A) To know the type of traffic (B) To determine the facilities to traffic regulations (C) To design proper drainage system (D) All the above

Last Answer : Answer: Option D

Road makers along roads from the edge of a kerb should not be less than (A) 40 cm (B) 45 cm (C) 50 cm (D) 60 cm

Description : Road makers along roads from the edge of a kerb should not be less than (A) 40 cm (B) 45 cm (C) 50 cm (D) 60 cm

Last Answer : Answer: Option D

Parapet walls along hill roads, are provided (A) To retain the back filling (B) To prevent the hill from sliding (C) To prevent the wheels of the vehicle from coming on the retaining wall (D) None of these

Description : Parapet walls along hill roads, are provided (A) To retain the back filling (B) To prevent the hill from sliding (C) To prevent the wheels of the vehicle from coming on the retaining wall (D) None of these

Last Answer : Answer: Option C

An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km(B) 60 m per km (C) 75 m per km (D) 90 m per km

Description : An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km (B) 60 m per km (C) 75 m per km (D) 90 m per km

Last Answer : Answer: Option B

Hill roads are (A) Provided camber along spur curves (B) Provided camber along valley curves (C) Seldom provided a camber (D) None of these

Description : Hill roads are (A) Provided camber along spur curves (B) Provided camber along valley curves (C) Seldom provided a camber (D) None of these

Last Answer : Answer: Option C

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

Who do you complain to when a train stops in an intersection blocking traffic?

Description : Who do you complain to when a train stops in an intersection blocking traffic?

Last Answer : You honk your horn and yell profanities like a good citizen and wait for the train to move.

When approaching an intersection where there are no signs or traffic lights you must?

Description : When approaching an intersection where there are no signs or traffic lights you must?

Last Answer : At an intersection where there is no stop sign or traffic signal (with the exception of roundabouts), drivers must yield to vehicles coming from the right. When approaching a roundabout intersection, ... in the circle and pedestrians in the crosswalks. Wait for a gap in traffic before entering.

Did You See Driverless Vehicles on Mountainous Roads in Northern California in the 1950s?

Description : Did You See Driverless Vehicles on Mountainous Roads in Northern California in the 1950s?

Last Answer : What?

Do you see a day where autonomous vehicles will be the only vehicles on the roads?

Description : Do you see a day where autonomous vehicles will be the only vehicles on the roads?

Last Answer : Some claim that it will eliminate the need for transport drivers, wishful thinking but I have been in the industry way to long to see that happening , one example would be say a ... babysit this wonderful technology,and protect the load in cases of breakdowns.(and there will be breakdowns)

To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is (A) Middle half rule of columns (B) Middle third rule of columns (C) Middle fourth rule of columns (D) None of these

Description : To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is (A) Middle half rule of columns (B) Middle third rule of columns (C) Middle fourth rule of columns (D) None of these

Last Answer : (C) Middle fourth rule of columns

Along horizontal curves, if centrifugal force exceeds lateral friction, vehicles may (A) Skid (B) Slip (C) Not be affected (D) None of these

Description : Along horizontal curves, if centrifugal force exceeds lateral friction, vehicles may (A) Skid (B) Slip (C) Not be affected (D) None of these

Last Answer : Answer: Option A

To compensate the loss of tractive force of vehicles along curves of radius R, the percentage reduction of gradient, is (A) 50/R (B) 75/R (C) 100/R (D) 125/R

Description : To compensate the loss of tractive force of vehicles along curves of radius R, the percentage reduction of gradient, is (A) 50/R (B) 75/R (C) 100/R (D) 125/R

Last Answer : Answer: Option B

Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Description : Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Last Answer : Answer: Option C

If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Description : If A is the projected area of a vehicle in square metres, V is speed of the vehicles in kilometres per hour and C is a constant, then the wind resistance R to the moving vehicles, is given by (A) R = CAV (B) R = CAV2 (C) R = CAV3 (D) R = C 2AV

Last Answer : Answer: Option B

The maximum comfortable retardation applied to moving vehicles, is (A) 3.42 m/sec2 (B) 4.42 m/sec2 (C) 5.56 m/sec2 (D) 7.80 m/sec2

Description : The maximum comfortable retardation applied to moving vehicles, is (A) 3.42 m/sec2 (B) 4.42 m/sec2 (C) 5.56 m/sec2 (D) 7.80 m/sec2

Last Answer : Answer: Option A

If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Description : If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Last Answer : Answer: Option C

A traveler, on his way to Miami, reaches a road junction, where he can turn left or right. He knows that only one of the two roads leads to Miami, but unfortunately, he does not know which one. Fortunately, he sees two twin-brothers standing at the road junction, and he decides to ask them for directions. The traveler knows that one of the two brothers always tells the truth and the other one always lies. Unfortunately, he does not know which one always tells the truth and which one always lies. How can the traveler find out the way to Miami by asking just one question to one of the two brothers? -Riddles

Description : A traveler, on his way to Miami, reaches a road junction, where he can turn left or right. He knows that only one of the two roads leads to Miami, but unfortunately, he does not know which one ... the traveler find out the way to Miami by asking just one question to one of the two brothers? -Riddles

Last Answer : The question that the traveler should ask is: 'Does the left road lead to Miami according to your brother?' If the answer is 'Yes', the traveler should turn right, and if the answer is 'No', the traveler should turn left.

Over-turning of vehicles on a curve can be avoided by using (A) Compound curve (B) Vertical curve (C) Reverse curve (D) Transition curve

Description : Over-turning of vehicles on a curve can be avoided by using (A) Compound curve (B) Vertical curve (C) Reverse curve (D) Transition curve

Last Answer : (D) Transition curve

Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Description : Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Last Answer : Answer: Option D

Tar roads get easily damaged during – (1) summer (2) winter (3) rainy season (4) peak traffic hours

Description : Tar roads get easily damaged during – (1) summer (2) winter (3) rainy season (4) peak traffic hours

Last Answer : (3) rainy season Explanation: Tar & chip have been used for over 100 years, all over the world, with great success, to pave and resurface roads. However, they are easily spoiled in rains and natural calamity. Concrete roads are less affected.