Write four objectives of concrete mix design. 

1 Answer

Answer :

i. To achieve a specified compressive strength of concrete. ii. To reduce wastage of concrete by correct proportioning. iii. To achieve economy by selecting appropriate concrete ingredients. iv. To maintain workability of concrete mix throughout work. v. To obtain maximum possible yield per bag of cement. vi. To ensure less defects and enhanced durability of concrete.

Related questions

Description : Write any four factors affecting concrete mix design.

Last Answer : Factors affecting concrete mix design: The concrete mix design procedure affects by the following factors. 1. Maximum water-cement ratio 2. Minimum cement content 3. Maximum nominal size of aggregate ... fine aggregate 9. Type of admixture to be used 10. Specific gravity of all ingredient materials

Description : Name four methods of concrete mix design.

Last Answer : i. Arbitrary proportion method ii. Maximum density method iii. Fineness modulus method iv. ACI Committee 211 method v. Road note no. 4 method (Grading Curve Method) vi. Indian road ... Mix design based on flexural strength xii. 12.British DOE mix design method (Department of Environment)

Description : Write the procedure (steps) of mix design of concrete with reference to the provisions laid in IS:10262-2009

Last Answer : IS method of mix design with steps- The concrete mix design is done by IS 10262-2009 using following steps- 1. Calculation of target mean strength -The concrete mix design is done ... volume of all ingredients of concrete the mix proportion is calculated for said mix design of concrete.

Description : The factors which effects the design of concrete mix is (a) Fineness modulus (b) Water cement ratio (c) Slump (d) All of these

Last Answer : (d) All of these

Description : Define concrete mix design.

Last Answer : Concrete Mix Design: It is the process of determining the quantity of materials required for given grade of concrete, is known as concrete mix design.

Description : Explain the method of concrete mix design procedure by I.S. method as IS-10262.

Last Answer : Procedure of IS method of concrete mix design: The concrete mix design is done by IS 10262-2009 using following steps  1. Calculation of target mean strength: The concrete mix design is ... volume of all ingredients of concrete the mix proportion is calculated for said mix design of concrete.

Description : Describe four characteristics of ready mix concrete.

Last Answer : Characteristics of ready mix concrete: i. RMC can be ordered in bulk amount at a time. ii. It has more homogeneity as compared to other concrete. iii. It becomes economical in large project. iv. It can ... high. vi. Useful in urban areas where it is lack of space. vii. No dust and noise pollution.

Description : Which of the following statements is true of Insured Asset Allocation? A. It is aimed at benefiting from short-term under pricing and over pricing of assets. B. In this strategy the risk ... . It is a strategy aimed at achieving the objectives of the investor without depending on market timing

Last Answer : E. It is a strategy aimed at achieving the objectives of the investor without depending on market timing.

Description : The two components of a marketing strategy are 1. Marketing objectives and promotion 2. Marketing mix and marketing objectives 3. Target market and marketing mix 4. Target markets and promotions 5. None of these

Last Answer : Target market and marketing mix

Description : Most specifically, marketing strategy : 1. Is concerned with key dicissions requried to reach an objective 2. Encompasses selecting and analysing a target market and creating and maintaining an ... 4. Involves determining the direction and objectives of marketing management 5. None of these

Last Answer : Encompasses selecting and analysing a target market and creating and maintaining an appropriate marketing mix

Description : The _______________________ is the specific mix of advertising, personal selling,sales promotion, public relations, and direct marketing tools that the company uses to pursue its advertising and marketing ... mix B. Integrated dealer mix C. Marketing communications mix D. Marketing control mix

Last Answer : C. Marketing communications mix

Description : What factors should guide a company's planning efforts? A)A company's budget and overall objectives B)An analysis of target markets and the company's marketing mix C)A company's budget and ... D)A company's marketing mix and overall mission E)A company's mission and overall organisational goals

Last Answer : E)A company's mission and overall organisational goals

Description : The two steps of developing a marketing strategy include selecting and analysing a target market and: A)selecting a group of persons towards which the firm should direct its marketing efforts. B) ... D)developing a marketing mix that precisely meets the needs of individuals in the target market.

Last Answer : D)developing a marketing mix that precisely meets the needs of individuals in the target market.

Description : he two components of a marketing strategy are: A)marketing objectives and promotion B)marketing mix and marketing objectives C)target market and marketing mix D)target markets and promotions

Last Answer : C)target market and marketing mix

Description : Most specifically, marketing strategy: A)is concerned with key decisions required to reach an objective VU Cafeteria B)encompasses selecting and analysing a target market and creating ... to serve larger geographic areas D)involves determining the direction and objectives of marketing management

Last Answer : B)encompasses selecting and analysing a target market and creating and maintaining an appropriate marketing mix

Description : Which statement is true, with respect to Corporate Level Managers' (CEO's, VP's etc)? A. Translate action-oriented, corporate level direction and intent into concrete objectives and strategies for SBU' ... level of Technical Skills C. Demand a high level of Human Skills D. None of these options

Last Answer : None of these options

Description : Which statement is true, with respect to Corporate Level Managers' (CEO's, VP's etc)? A. Translate action-oriented, corporate level direction and intent into concrete objectives and strategies for SBU' ... level of Technical Skills C. Demand a high level of Human Skills D. None of these options

Last Answer : None of these options

Description : In a construction site, a crane lifts 1000 kg of concrete mix to roof top at a height of 20 meters in 50 seconds. If the value of gravity 'g' due to earth is 10 m s-2, the power of elevator will be. -Physics

Last Answer : 4 KW (kilowatt)

Description : For M 150 mix concrete, according to I.S. specifications, local bond stress, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Last Answer : Answer: Option B

Description : Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5 (C) 7.0 (D) 7.5

Last Answer : Answer: Option B

Description : Which of the following represents a carpet of sand-bitumen mix without coarse aggregates? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete

Last Answer : Answer: Option B

Description : For the construction of R.C.C. slabs, columns, beams, walls, etc. the grade of concrete mix used, is (A) 1 : 3 : 6 (B) 1 : 1½ : 3 (C) 1 : 2 : 4 (D) 1 : 1 : 2

Last Answer : (C) 1 : 2 : 4

Description : The shrinkage of concrete (A) Is proportional to water content is the mix (B) Is proportional to cement concrete (C) Increases with age of concrete (D) All the above

Last Answer : (D) All the above

Description : 1% of voids in a concrete mix would reduce its strength by about (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (A) 5 %

Description : After casting, an ordinary cement concrete on drying (A) Expands (B) Mix (C) Shrinks (D) None of these

Last Answer : (C) Shrinks

Description : Pick up the correct statement from the following: (A) Insufficient quantity of water makes the concrete mix harsh (B) Insufficient quantity of water makes the concrete unworkable (C) Excess quantity of water makes the concrete segregated (D) All the above

Last Answer : (D) All the above

Description : M 150 grade of concrete approximates (A) 1 : 3 : 6 mix (B) 1 : 1 :2 mix (C) 1 : 2 : 4 mix (D) 1 : 1.5 : 3 mix

Last Answer : (B) 1 : 1 :2 mix

Description : Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Last Answer : Answer: Option D

Description : For the construction of the retaining structures, the type of concrete mix to be used, is (A) 1 : 3 : 6 (B) 1 : 2 : 4 (C) 1 : 1½ : 3 (D) 1 : 4 : 8

Last Answer : Answer: Option C

Description : If the slump of a concrete mix is 60 mm, its workability is (A) Very low (B) Low (C) Medium (D) High

Last Answer : Answer: Option C

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Last Answer : Answer: Option C

Description : Inert material of a cement concrete mix, is (A) Water (B) Cement (C) Aggregate (D) None of these

Last Answer : Answer: Option C

Description : Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate

Last Answer : Answer: Option A

Description : Shrinkage in concrete can be reduced by using (A) Low water cement ratio (B) Less cement in the concrete (C) Proper concrete mix (D) All the above

Last Answer : Answer: Option D

Description : M10 grade of concrete approximates (A) 1 : 3 : 6 mix (B) 1 : 1 : 2 mix (C) 1 : 2 : 4 mix (D) 1 : 1.5 : 3 mix

Last Answer : Answer: Option A

Description : For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 kg

Last Answer : Answer: Option C

Description : Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above

Last Answer : Answer: Option D

Description : Pick up the incorrect statement from the following. While performing preliminary test on concrete (A) Proportions of the material and water should be the same as to be used at the work site (B) ... in air-tight containers (D) Concrete ingredients should be kept at a temperature of 37° 2°C

Last Answer : Answer: Option D

Description : The concrete mix which causes difficulty in obtaining a smooth finish, possess (A) Segregation (B) Internal friction (C) Hardness (D) Bleeding

Last Answer : Answer: Option C

Description : The following proportion of the ingredients of concrete mix, is not in conformation to arbitrary method of proportioning (A) 1 : 1 : 2 (B) 1 : 2 : 4 (C) 1 : 3 : 6 (D) 1 : 4 : 10

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Last Answer : Answer: Option D

Description : Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test

Last Answer : Answer: Option C

Description : The property of fresh concrete, in which the water in the mix tends to rise to the surface while placing and compacting, is called (A) Segregation (B) Bleeding (C) Bulking (D) Creep

Last Answer : Answer: Option B

Description : Internal friction between the ingredients of concrete, is decreased by using (A) Less water (B) Fine aggregates (C) Rich mix (D) More water and coarse aggregates

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) Segregation is necessary for a workable concrete (B) Consistency does not affect the workability of concrete (C) If the concrete mix is dry, the slump is maximum (D) None of these

Last Answer : Answer: Option D

Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Last Answer : Answer: Option D

Description : Pick up the incorrect statement from the following: (A) Concrete for which preliminary tests are conducted, is called controlled concrete (B) Bulking of sand depends upon the fineness of grains (C) Concrete mix 1 : 6 : 12, is used for mass concrete in piers (D) All the above

Last Answer : Answer: Option D

Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Last Answer : Answer: Option A

Description : The depth of concrete bed of the foundation depends upon (A) The projection of the concrete block beyond the footing over it (B) The upward soil pressure (C) The mix of the concrete (D) All the above

Last Answer : Answer: Option D