Description : What line has a typical velocity factor of about 0.8? A. Shielded pair B. Flexible coaxial C. Twin-lead D. Open-wire line
Last Answer : C. Twin-lead
Description : What is the typical velocity factor of open-wire line? A. 0.9 B. 0.8 C. 0.5 D. 0.7
Last Answer : A. 0.9
Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.66 C. 0.30 D. 0.10
Last Answer : B. 0.66
Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.10 C. 0.66 D. 0.30
Last Answer : C. 0.66
Description : What is the velocity factor of coaxial cable with a characteristic impedance of 50Ω and capacitance of 30pF/ft and inductance of 75 nH/ft? A. 0.58 B.0.68 C. 0.98 D. 0.81
Last Answer : B.0.68
Description : What material is most often used for the outer covering of coaxial cables? A. PVC B. Teflon C. PE D. Polystyrene
Last Answer : A. PVC
Description : What is the meaning of the term velocity factor of a transmission line? A. The ratio of the characteristic impedance of the line to the terminating impedance B. The index of shielding for coaxial ... The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.
Last Answer : D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum.
Description : What is the meaning of the term velocity factor of a transmission line? A. The index of shielding for coaxial cable B. The velocity of the wave on the transmission line multiplied by the velocity of ... The velocity of the wave on the transmission line divided by the velocity of light in a vacuum
Last Answer : D. The velocity of the wave on the transmission line divided by the velocity of light in a vacuum
Description : The velocity factor in transmission lines vary from ___ to ___. A. 0.6 to 0.8 B. 0.3 to 0.5 C.0.5 to 0.9 D. 0.8 to 0.9
Last Answer : C.0.5 to 0.9
Description : What is the time delay introduced by a 75-ft coaxial cable with a dielectric constant of 2.3? A. 1.54 ns B. 11.5 ns C. 115.6 ns D. 1156 ns
Last Answer : C. 115.6 ns
Description : What is the actual length in feet of a one-quarter wavelength of a coax with a velocity factor of 0.68 to 30 MHz? A. 19.26 B. 5.6 C. 17.82 D. 16.97
Last Answer : B. 5.6
Description : What would be the physical length of a tpical coaxial transmission line that is electrically one-quarter wavelength long at 14.1 MHz? A. 20 meters B. 3.51 meters C. 2.33 meters D. 0.25 meter
Last Answer : B. 3.51 meters
Description : What is the characteristic impedance of a coaxial line with the following data: inner diameter = 0.2 in., center conductor diameter = 0.06 in., insulation = Teflon. A. 200Ω B. 75Ω C. 50Ω D. 150Ω
Last Answer : C. 50Ω
Description : If the length of an antenna is changed from 2.5 meters to 2.8 meters, its resonant frequency will A. increase B. depend on the velocity factor so the resonant frequency can either be increased or decreased C. will be unchanged D. decrease
Last Answer : D. decrease
Description : Which of the following is not a transmission medium? a. telephone lines b. coaxial cables c. modem d. microwave systems
Last Answer : microwave systems
Description : ______ cables carry data signals in the form of light. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above
Last Answer : Fiber-opti
Description : The types of Unguided transmission channel or media used for LAN are __. A. Twisted Pair Cables B. Coaxial Cables C. Radio Waves D. All the above
Last Answer : C. Radio Waves
Description : ……cables are composed of a glass or plastic inner core surrounded by cladding,all encased in an outside jacket. a. Fiber-optic b. Coaxial c. Shield Twisted Pair d. Unshield Twisted-pair
Last Answer : a. Fiber-optic
Description : Which of the following cables can transmit data at high speeds- 1) Coaxial Cable 2) Optic fibre Cable 3) Twistedpair Cable 4) UTP Cabl
Last Answer : 2) Optic fibre Cable
Description : A large numbers of computers in a wide geographical area can be efficiently connected using (A) twisted pair lines (B) coaxial cables (C) Communication satellites (D) all of the above
Last Answer : (D) all of the above
Description : Which of the following cables can transmit data at high speeds 1 Coaxial Cable 2 Optic fibre Cable 3 Twistedpair Cable 4 UTP Cable
Last Answer : 2 Optic fibre Cable
Description : What precautions should you take when tying bundles containing coaxial cables?
Last Answer : Do not tie too tightly and use the proper type of tape.
Description : A coaxial cable has 7dB of reflected power when the input is 5 watts. What is the output of the transmission line? A. 5 watts B. 2.5 watts C. 1.25 watts D. 1 watt
Last Answer : D. 1 watt
Description : In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9
Last Answer : B. 11
Description : What do you call a cable consisting of twisted pairs of conductors, each separately insulated? A. Microstrip line B. Strip line C. Quad D. Coaxial cable
Last Answer : C. Quad
Description : Which of the following is not a bounded medium? A. Coaxial line B. Two-wire line C. Waveguide D. Free space
Last Answer : D. Free space
Description : What medium is used by IBM token ring network that operates at either 4 Mbps or 16 Mbps? A. Twisted pair B. Coaxial cable C. Fiber-optic D. Parallel-wire line
Last Answer : A. Twisted pair
Description : ____ system transmits frequency-division-multiplexed voice band signals over a coaxial cable for distances up to 4000 miles. A. T carrier B. X carrier C. L carrier D. F carrier
Last Answer : C. L carrier
Description : What type of balun (balanced-to-unbalanced) is used in high frequency applications? A. Transformer type balun B. A specially configured coaxial transmission line C. A specially configured parallel-wire line D. A λ/2 transformer balun
Last Answer : B. A specially configured coaxial transmission line
Description : Which of the following is considered the most frequently used transmission line? A. Two-wire open line B. Twin lead C. Rigid coaxial line D. Flexible coaxial line
Last Answer : D. Flexible coaxial line
Description : Why is the physical length of a coaxial cable transmission line shorter than its electrical length? A. Skin effect is less pronounced in the coaxial cable B. RF energy moves slower along the ... higher in the parallel feed line D. The characteristic impedance is higher in the parallel feed line
Last Answer : B. RF energy moves slower along the coaxial cable
Description : An RG-11/U foam coaxial cable has a maximum voltage standing wave of 52 V and a minimum voltage of 17 V. Find the value of the resistive load. A. 24.59Ω B. Either A or C C. 228.75Ω D. Neither A nor C
Last Answer : B. Either A or C
Description : Which coaxial connector is a more complex and expensive but do a better job in maintaining the electrical characteristics of the cable through the interconnections? A. N-type connector B. F-type connector C.BNC D. PL-259
Last Answer : A. N-type connector
Description : Which coaxial cable connector is least expensive and is widely used for TV sets,VCRs and cable TV? A. N-type connector B. F-type connector C. BNC D. PL-259
Last Answer : B. F-type connector
Description : Which of the following coaxial cable connectors is called the UHF connector? A. PL-259 B. BNC C. N-type connector D. F connector
Last Answer : A. PL-259
Description : A transmission line consisting of two conductors that have equal resistance per unit length. A. Unbalanced line B. Open-wire line C. Balanced line D. Coaxial line
Last Answer : C. Balanced line
Description : Best choice of transmission line component to couple a coaxial line to a parallel-wire line A. Shorting B. Balun C. Slotted line D. Directional coupler
Last Answer : B. Balun
Description : The outer conductor of a coaxial transmission line is always grounded at the A. Input only B. Input and output C. Output only D. Point of high SWR
Last Answer : B. Input and output
Description : Coaxial lines are used on those systems operating _______. A. Below 2 GHz B. At 300 MHz C. Above 10KHz D. Above 10GHz
Last Answer : A. Below 2 GHz
Description : A large speaker having a large diameter (15 cm and above) A. Coaxial speaker B. Woofer C. Tweeter D. Trixial speaker
Last Answer : B. Woofer
Description : To couple a coaxial line to parallel line, it is better to use a ______. A. Slotted line B. Quarter-wave transformer C. Directional Coupler D. Balun
Last Answer : D. Balun
Description : To connect coaxial line to a parallel-wire _________ is the best to use. A. directional coupler B. quarter-wave transformer C. balun D. slotted line
Last Answer : C. balun
Description : ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste
Last Answer : B. Communications satellite
Description : What is actual length in feet of a one-half wavelength of a coax with a velocity factor of 0.59 at 26 MHz? A. 11.16 B. 40.29 C. 42.46 D. 46.28
Last Answer : A. 11.16
Description : What is the actual length in feet of a one-half wavelength of a coax with a velocity factor of 0.63 at 28 MHz? A. 44.28 B. 43.46 C. 11.07 D. 46.27
Last Answer : C. 11.07
Description : What is the actual length in feet of a one-quarter wavelength of a coax with a velocity factor of 0.695 at 45 MHz? A. 17.82 B. 19.26 C. 16.28 D. 16.97
Last Answer : C. 16.28
Description : What is the characteristic impedance of a single wire with a diameter d= 0.25 mm placed at the center between grounded parallel planes separated by 1 mm apart. The wire is held by a material with a velocity factor of 0.75. A. 85 Ω B. 63 Ω C. 50 Ω D. 75 Ω
Last Answer : D. 75 Ω
Description : What is the typical number of bits in a static memory location? A. 1 B. 2 C. 16 D. 8
Last Answer : D. 8
Description : What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s
Last Answer : D. 1.6 to 1.8 s
Description : What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.
Last Answer : C. 0.635 to 15.24 cm