Description : What noise type is observable between 8 MHz to somewhat above 1.43 GHz or up to 1.5 GHz? A. Solar noise B. Space noise C. Galactic noise D. Cosmic noise
Last Answer : B. Space noise
Description : Atmospheric noise is less at severe frequencies above A. Audio level B. 30 MHz C. 10 GHz D. 1 GHz
Last Answer : B. 30 MHz
Description : Extra-terrestrial noise is observable at frequencies from A. 0 to 20 KHz B. Above 2 GHz C. 8 to 1.43 GHz D. 5 to 8 GHz
Last Answer : C. 8 to 1.43 GHz
Description : Industrial noise frequency is between _________. A. 200 to 3000 Mhz B. 15 to 160 Mhz C. 0 to 10 Khz D. 20 Ghz
Last Answer : B. 15 to 160 Mhz
Description : Atmospheric noise or static is not a great problem A. at frequencies below 20 MHz B. at frequencies below 5 MHz C. at frequencies above 30 MHz D. at frequencies above 1 MHz
Last Answer : C. at frequencies above 30 MHz
Description : Atmospheric noise becomes less severe at frequencies A. above 30 MHz B. below 30 MHz C. above 3000 kHz D. below 3000kHz
Last Answer : A. above 30 MHz
Description : The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz
Last Answer : D. 300 – 3000 MHz
Description : Fiber optic cable operates near _______ frequencies. A. 800 THz B. 20 MHz C. 200 MHz D. 2 GHz
Last Answer : A. 800 THz
Description : The extremely high frequency (EHF) band is in the radio spectrum range of _______. A. 30 to 300 kHz B. 30 to 300 GHz C. 3 to 30 MHz D. 3 to 30 GHz
Last Answer : B. 30 to 300 GHz
Description : Electromagnetic waves of frequencies arbitrarily lower than 3,000 GHz, propagated in space without artificial guide. A. Space waves B. Terrestrial waves C. Mobile D. Hertzian waves
Last Answer : D. Hertzian waves
Description : Which of the following types of noise becomes of great importance at frequencies? A. Shot noise B. Random noise C. Impulse noise D. Transit-time noise
Last Answer : D. Transit-time noise
Description : Industrial noise frequency is between _____. A. 0 to 10 KHz B. 160 MHz to 200 MHz C. 15 to 160 MHz D. 200 to 3000 MHz
Last Answer : C. 15 to 160 MHz
Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz
Last Answer : B. 156.8 MHz
Description : Most satellites operate in which frequency band? A. 30 to 300 MHz B. 300 MHz to 3 GHz C. 3 GHz to 30 GHz D. Above 300 GHz
Last Answer : C. 3 GHz to 30 GHz
Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz
Last Answer : D. 500 MHz
Description : What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz
Last Answer : C. 2225 MHz
Description : Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz
Last Answer : D. 300 MHz to 3 GHz
Description : Which of the following frequency bands is best suited for sky wave propagation? A. 30 to 300 kHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 3 GHz to 30 GHz
Last Answer : B. 3 MHz to 30 MHz
Description : A radio frequency in the ultra high frequency band of the radio spectrum band. A. 235.50 MHz B. 450.50 MHz C. 150.50 GHz D. 0.31250 GHz
Last Answer : D. 0.31250 GHz
Description : Coaxial lines are used on those systems operating _______. A. Below 2 GHz B. At 300 MHz C. Above 10KHz D. Above 10GHz
Last Answer : A. Below 2 GHz
Description : A voice-grade circuit using the PTN has an ideal passband of A. 0 to 4 Hz B. 0 to 4 kHz C. 0 to 4 GHz D. 0 to 4 MHz
Last Answer : B. 0 to 4 kHz
Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz
Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz
Description : Which noise is produced by lighting discharges in thunderstorms? A. White noise B. Extraterrestrial noise C. Industrial noise D. Atmospheric noise
Last Answer : D. Atmospheric noise
Description : What is the frequency range of C-band? A. 8.5 to 12.5 GHz B. 3.4 to 6.425 GHz C. 12.95 to 14.95 GHz D. 27.5 to 31 GHz
Last Answer : B. 3.4 to 6.425 GHz
Description : The front-end of a television receiver, having a bandwidth of 7Mhz, and operating at a temperature of 27˚C , consists of an amplifier having a gain of 15 followed by a mixer whose gain is 20. The ... equivalent noise resistance for this television receiver. A. 8760 Ω B. 875Ω C. 8.76Ω D. 0.876Ω
Last Answer : B. 875Ω
Description : What is the frequency range of C-band? A. 10.95 to 14.5 GHz B. 27.5 to 31 GHz C. 3.4 to 6.424 GHz D. 1.53 to 2.7 GHz
Last Answer : C. 3.4 to 6.424 GHz
Description : Where is the noise generated that primarily determines the signal-to-noise ratio in a VHF (150 MHz) marine-band receiver? A. In the ionosphere B. In the receiver rear end C. In the receiver front end D. In the atmosphere
Last Answer : C. In the receiver front end
Description : What is the free space attenuation of a satellite communications system operating at 36,000 km above the earth at 5.0 GHz? A. 198 dB B. 202 dB C. 142 dB D. 138 dB
Last Answer : A. 198 dB
Description : What is the free space loss, in dB, between two microwave parabolic antennas 38.0 kilometer apart operating at 7.0 GHz? A. 145.6 dB B. 138.5 dB C. 135.5 dB D. 140.89 dB
Last Answer : D. 140.89 dB
Description : The full range of VHF frequencies used for communications is: a. 3 to 30 MHz b. 88 to 108 MHz c. 108.0 to 139.95 MHz d. 118.0 to 136.975 MHz
Last Answer : d. 118.0 to 136.975 MHz
Description : Which of the following low noise transistors is commonly used at microwave frequencies? A. MOSFET B. GASFET C. MESFET D. JFET
Last Answer : C. MESFET
Description : When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.
Last Answer : D. internal receiver noise.
Description : What is the mixing process? A. Distortion caused by auroral propagation B. The combination of two signals to produce sum and difference frequencies. C. The elimination of noise in wideband receiver by phase differentiation D. The elimination of noise in a wideband receiver by phase comparison
Last Answer : B. The combination of two signals to produce sum and difference frequencies.
Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference
Last Answer : C. Out of the band
Description : One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used
Last Answer : A. noise is amplified with voice when an FDM system is used
Description : What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice ... a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone
Last Answer : C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz
Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB
Last Answer : A. 403 dB
Description : Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW
Last Answer : A. 0.871 μW
Description : Assuming a UHF frequency range of 405.0125 MHz to 405.0875 MHz at 25 kHz channeling plan, how many channels can you produce? A. 2.5 ch. B. 2 ch. C. 4 ch. D. 3 ch.
Last Answer : D. 3 ch.
Description : What is the frequency range of an aircraft’s Very High Frequency (VHF) communications? A. 118.000 MHz to 136.975 MHz (worldwide up to 151.975 MHz) B. 108.000 MHz to 117.95 MHz C. 329.15 MHz to 335.00 MHz D. 2.0000 MHz to 29.999 MHz
Last Answer : A. 118.000 MHz to 136.975 MHz (worldwide up to 151.975 MHz)
Description : What is the frequency range of an aircraft’s radio altimeter? A. 962 MHz to 1213 MHz B. 329.15 MHz to 335.00 MHz C. 4250 MHz to 4350 MHz D. 108.00 MHz to 117.95 MHz
Last Answer : C. 4250 MHz to 4350 MHz
Description : Assume a frequency range of 405.0125 MHz to 405.0875 MHz and 25 kHz channeling plan, determine the center frequency of the second channel from the lower limit. A. 405.030 MHz B. 405.025 MHz C. 405.050 MHz D. 405.075 MHz
Last Answer : C. 405.050 MHz
Description : Assume a frequency range of 401.000 MHz to 401.050 MHz, if you apply 25 kHz channeling plan, determine the center frequency of the first channel from the lower limit. A. 401.010 MHz B. 401.0125 MHz C. 401.025 MHz D. 401.00625 MHz
Last Answer : B. 401.0125 MHz
Description : This type of transmission permits communication in the frequency range from 30 to 60 MHz and over distances from about 1000 to 2000 km. A. Troposcatter B. Ionospheric scatter C. Ducting D. Microwave
Last Answer : B. Ionospheric scatter
Description : Type of transmission path that permits communication in the frequency range from 30 to 60 MHz and over distances form about 1000 to 2000 km. A. Ducting B. Ionospheric scatter C. Microwave D. Troposcatter
Description : Most internal noise comes from A. Shot noise B. Transit-time noise C. Thermal agitation D. Skin effect
Last Answer : C. Thermal agitation
Description : Calculate the noise figure of the receiver whose RF amplifier has an input resistance of 1000Ω and an equivalent shot-noise resistance of 2000Ω, a gain of 25 and load resistance of 125 kΩ. Given that the bandwidth is 1. ... to an antenna with an impedance of 75Ω. A. 30.3 B. 3.03 C. 303 D. .303
Last Answer : A. 30.3
Description : Form of interference caused by rain or dust storms. A. Precipitation static B. Shot-noise C. Galactic noise D. Impulse noise
Last Answer : A. Precipitation static
Description : What noise is a transient short-duration disturbance distributed essentially uniformly over the useful passband of a transmission system? A. Flicker noise B. Transit-time noise C. Shot noise D. Impulse noise
Last Answer : D. Impulse noise