The solar cycle repeats the period of great electrical disturbance approximately every
A. 11 years
B. 10 years
C. 9 years
D. 8 years

1 Answer

Answer :

A. 11 years

Related questions

Description : What is the 18 year 11 day period after which the pattern of lunar and solar eclipses repeats is called?

Last Answer : Feel Free to Answer

Description : A large emission of hydrogen from the sun that affects communications. A. Solar flare B. Cosmic disturbance C. Ballistic disturbance D. Solar noise

Last Answer : A. Solar flare

Description : What noise is a transient short-duration disturbance distributed essentially uniformly over the useful passband of a transmission system? A. Flicker noise B. Transit-time noise C. Shot noise D. Impulse noise

Last Answer : D. Impulse noise

Description : Power is a _____________ amount of energy used in specific period of time A. large B. definite C. electrical D. relative

Last Answer : B. definite

Description : For a space wave transmission, the radio horizon distance of a receiving antenna with a height of 64 meters is approximately A. 8 km B. 32 km C. 64 km D. 256 km

Last Answer : B. 32 km

Description : In T1 digital system, the frame synchronization code repeats every

Last Answer : In T1 digital system, the frame synchronization code repeats every 125 microsecond

Description : What is the period of a wave? A. The number of degrees in tone cycle B. The number of zero crossing in one cycle C. The amplitude of the wave D. The time required to complete one cycle

Last Answer : D. The time required to complete one cycle

Description : In cellular system, the average lead time to install a new base station is approximately ____ months to a year. A. 4 B. 5 C. 6 D. 10

Last Answer : C. 6

Description : For a space wave transmission, the radio horizon distance of a transmitting antenna with a height of 100 meters is approximately: A. 10 km B. 40 km C. 100 km D. 400 km

Last Answer : B. 40 km

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.66 C. 0.30 D. 0.10

Last Answer : B. 0.66

Description : What is the velocity factor for non-foam dielectric 50 or 75 ohm flexible coaxial cable such as RG 8, 11, 58 and 59? A. 2.70 B. 0.10 C. 0.66 D. 0.30

Last Answer : C. 0.66

Description : In a typical mobile satellite array antenna if three elements are activated, how many elements are deactivated? A. 3 B. 11 C. 5 D. 9

Last Answer : B. 11

Description : What noise type is observable between 8 MHz to somewhat above 1.43 GHz or up to 1.5 GHz? A. Solar noise B. Space noise C. Galactic noise D. Cosmic noise

Last Answer : B. Space noise

Description : At what particular wavelength is solar flux measured? A. 10.7 mm band B. 10.7 m band C. 10.7 cm band D. 10.7 nm band

Last Answer : C. 10.7 cm band

Description : The frequency of Ku band for satellite communications. A. 6/4 GHz B. 14/11 GHz C. 12/14 GHz D. 4/8 GHz

Last Answer : B. 14/11 GHz

Description : The Ku-band in the satellite service A. 14/11 GHz B. 30/17 GHz C. 8/7 GHz D. 6/4 GHz

Last Answer : A. 14/11 GHz

Description : What is the gain of an antenna over a half-wavelength dipole when it has 6 dB gain over an isotropic radiator? A. 6.0 dB B. 8.1 dB C. 3.9 dB D. 10.0 dB

Last Answer : C. 3.9 dB

Description : ECE Board Exam March 1996 The potential difference between any exposed structured to ground in any electrical installation should not exceed _________ volts RMS. A. 10 B. 45 C. 0 D. 30

Last Answer : B. 45

Description : The noise figure of the first circuit in tandem connection is 10.5 dB while its power gain is 15, what is the over all noise figure if the second circuit has a noise figure of 11 dB? A. 11.59 dB B. 11.23 dB C. 10.79 dB D. 10.5 dB

Last Answer : C. 10.79 dB

Description : What is the life span of electric car batteries? A. 8 Year B. 10 years. C. 9 years D. 11 years.

Last Answer : A. 8 Year

Description : The ages of A and B are in the ratio 8 : 5. If the sum of their ages is 39 years, what will be the ratio of their ages after 9 years? a) 3 : 2 b) 8 : 7 c) 10: 7 d) 11 : 8 e) None of these

Last Answer : Sum of ratios = 8 +5 = 13. Sum of ages = 39 years 13 ratio = 39 years  1 ratio = 3 years 9 years = 3 ratio new ratio = (8+3) : (5+3) = 11 : 8 Answer: d)

Description : The ratio between the present ages of M and N is 8:9. If N is 6 years old than M, what will be the ratio of the ages of M and N after 6 years a) 9:10 b) 7:9 c) 9:8 d) 11:10

Last Answer : A Let M age and N age be 8x years and 9x years. Then 9x - 8x = 6 <=> x = 6 So required ratio will be (8x+6): (9x+6) 54:60 9:10

Description : In a pressure penstock 4500 m long, water is flowing at a velocity of 4 m/s. If the velocity of the pressure wave traveling in the pipe, due sudden complete closure of a valve at the downstream end, is ... period of oscillation in second under frictionless conditions? (a) 6 (b) 8 (c) 9 (d) 11

Last Answer : (a) 6

Description : A uniform slope was measured by the method of stepping. If the difference in level between two points is 1.8 m and the slope distance between them is 15 m, the error is approximately equal to (A) Cumulative, + 0.11 m (B) Compensating, ± 0.11 m (C) Cumulative, - 0.11 m (D) None of these

Last Answer : (A) Cumulative, + 0.11 m

Description : A bakery P can sold 500 breads in 4 hours, bakery Q can sold the same number of bread in 5 hrs while bakery R can sold them in 6 hrs. All the bakeries are opened at 8 a.m while bakery P is closed ... complete their target. Approximately at what time will the work be finished? a) 10 b) 8 c) 12 d) 6

Last Answer : A (P+Q+R)'s 1 hour work = (1/4 +1/5+ 1/6) =(15+12+10)/60 =37/60 Remaining work = 1- 37/60 = 23/60 (Q+R)'s 1 hour work = (1/5 +1/6) =11/30 Now 11/30 work is done by Q and R ... R in(30/11*23/60) =23/22 hrs = 1hr So the work will be finished approximately 1 hr after 9.am i.e., around 10 a.m

Description : In the fertile human female, approximately on which day of the menstrual cycle does ovulation take place? (a) Day 14 (b) Day 18 (c) Day 1 (d) Day 8

Last Answer : (a) Day 14

Description : What is the truth about the human body changing approximately every seven years?

Last Answer : answer:I had always heard it put something like this: Within a seven year period, every cell in your body will have been replaced. That isn’t quite true as it turns out. Some neurons can last a lifetime.

Description : The RDA is revised approximately every ____ years. a. five c. two b. ten d. three

Last Answer : a. five

Description : What is the maximum period for which a term deposit can be normally opened? A. 8 years B. 7 years C. 9 years D. 10 years

Last Answer : D. 10 years Explanation: The tenure of an Fixed Deposit or Term Deposit can vary from 7, 15 or 45 days to 1.5 years and can be as high as 10 years.

Description : Photodiodes used as fiber optic directors are a. Unbiased to generate a voltage same as a solar cell b. Forward bias c. Reversed bias d. Thermoelectrically cooled

Last Answer : c. Reversed bias

Description : What is the basic technique used to stabilize a satellite? A. Gravity-forward motion balance B. Spin C. Thruster control D. Solar panel orientation 62. The jet thrusters are usually

Last Answer : B. Spin

Description : Batteries are used to power all satellite subsystems A. at all times B. only during emergencies C. during eclipse periods D. to give the solar arrays a rest

Last Answer : C. during eclipse periods

Description : The main power sources for a satellite are A. batteries B. solar cells C. fuel cells D. thermoelectric generators 58. The maximum height of an ellip

Last Answer : B. solar cells

Description : Satellite engine uses A. jet propulsion B. ion propulsion system C. liquid fuel D. solar jet

Last Answer : B. ion propulsion system

Description : A noise whose source is within the solar system. A. Solar noise B. Thermal noise C. Cosmic noise D. Johnson Noise

Last Answer : A. Solar noise

Description : External noise originating outside the solar system A. Cosmic noise B. Solar noise C. Thermal noise D. Lunar noise

Last Answer : A. Cosmic noise

Description : Indicate the noise whose sources are in category different from that of the other three? A. Solar noise B. Cosmic noise C. Atmospheric noise D. Galactic noise

Last Answer : C. Atmospheric noise

Description : Atmospheric noise is known as _______noise. A. static B. cosmic C. solar D. lunar

Last Answer : A. static

Description : ______ is slow moving “cord-like” mass of plasma across the sun’s surface. A. Filament B. Solar flare C. Prominence D. Solar spot

Last Answer : A. Filament

Description : ______ is a slow moving large mass of plasma on the sun’s surface. A. Filament B. Solar flare C. Prominence D. Proton flare

Last Answer : C. Prominence

Description : A spot on the sun’s visible surface where the magnetic flux lines converge? A. Sunspot B. Filament C. Solar spot D. Prominence

Last Answer : A. Sunspot

Description : An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Last Answer : C. Immunity to noise

Description : What kind of battery panels are used in some advance satellites? A. Gallium Arsenide solar panel B. Germanium based panels C. Silicon based panels D. Gallium Phosphate solar panel

Last Answer : A. Gallium Arsenide solar panel

Description : Satellite engine use A. liquid fuel B. jet propulsion C. ion propulsion system D. solar jet

Last Answer : C. ion propulsion system

Description : A software company needs to develop a project that is estimated as 1000 function points and is planning to use JAVA as the programming language whose approximate lines of code per function point is accepted as 50. Considering a=1. ... ? (1) 11.2 months (2) 12.2 months (3) 13.2 months (4) 10.2 months

Last Answer : Generally, any projects are measured in weeks. However, the complex project might take more time depending on the level of object re-use available.

Description : A measurement of -75 dBm, C-message weighted, would be _________ dBrnc. A. 8 B. 7 C. 9 D. 15

Last Answer : D. 15

Description : What is the optimum reverberation time at 500 Hz for a cinema? A. 0.8 – 1.2 sec. B. 0.9 – 1.3 sec. C. 0.6 – 0.8 sec. D. 0.45 – 0.55 sec.

Last Answer : A. 0.8 – 1.2 sec.

Description : What is the optimum reverberation time at 500 to 1000 Hz of an auditorium? A. 0.9 to 1.1 s B. 1.4 to 1.6 s C. 1.5 to 1.6 s D. 1.6 to 1.8 s

Last Answer : D. 1.6 to 1.8 s

Description : What is the typical velocity factor of open-wire line? A. 0.9 B. 0.8 C. 0.5 D. 0.7

Last Answer : A. 0.9

Description : What is the typical velocity factor of coaxial cables? A. 0.6 to 0.8 B. 0.3 to 0.5 C. 0.5 to 0.9 D. 0.4 to 0.6

Last Answer : A. 0.6 to 0.8