Photodiodes used as fiber optic directors are a. Unbiased to generate a voltage same as a solar cell b. Forward bias c. Reversed bias d. Thermoelectrically cooled

Photodiodes used as fiber optic directors are
a. Unbiased to generate a voltage same as a solar cell
b. Forward bias
c. Reversed bias
d. Thermoelectrically cooled
by

1 Answer

Answer :

c. Reversed bias
by

Related questions

Photodiodes used as fiber optic directors are ∙ a. Unbiased to generate a voltage same as a solar cell ∙ b. Forward bias ∙ c. Reversed bias ∙ d. Thermoelectrically cooled

Description : Photodiodes used as fiber optic directors are ∙ a. Unbiased to generate a voltage same as a solar cell ∙ b. Forward bias ∙ c. Reversed bias ∙ d. Thermoelectrically cooled

Last Answer : ∙ c. Reversed bias

Photodiodes operate properly with ∙ A. forward bias ∙ B. reverse bias ∙ C. neither forward nor reverse bias ∙ D. either forward or reverse bias

Description : Photodiodes operate properly with ∙ A. forward bias ∙ B. reverse bias ∙ C. neither forward nor reverse bias ∙ D. either forward or reverse bias

Last Answer : ∙ B. reverse bias

Photodiodes operate property with ∙ a. Forward bias ∙ b. Reverse bias ∙ c. Neither A or B ∙ d. Either A or B

Description : Photodiodes operate property with ∙ a. Forward bias ∙ b. Reverse bias ∙ c. Neither A or B ∙ d. Either A or B

Last Answer : ∙ b. Reverse bias

A light emitting diode emits light only when (a) Reversed biased (b) forward biased (c) unbiased (d) none

Description : A light emitting diode emits light only when (a) Reversed biased (b) forward biased (c) unbiased (d) none

Last Answer : (b) forward biased

An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Description : An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Last Answer : C. Immunity to noise

Fiber-optic cables do not: a. carry current b. cause crosstalk c. generate EMI d. all of the above

Description : Fiber-optic cables do not: a. carry current b. cause crosstalk c. generate EMI d. all of the above

Last Answer : d. all of the above

Which type of fiber-optic cable is the best for very high speed data? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Description : Which type of fiber-optic cable is the best for very high speed data? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Last Answer : a. Single-mode step-index

Which type of fiber optic cable is most widely used? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Description : Which type of fiber optic cable is most widely used? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Last Answer : a. Single-mode step-index

A popular light wavelength in fiber-optic cable is a. 0.7 um b. 1.3 um c. 1.5 um d. 1.8 um

Description : A popular light wavelength in fiber-optic cable is a. 0.7 um b. 1.3 um c. 1.5 um d. 1.8 um

Last Answer : b. 1.3 um

Which of the following is not a major benefit of fiber-optic cable? a. Immunity from interference b. No electrical safety problems c. Excellent data security d. Lower cost

Description : Which of the following is not a major benefit of fiber-optic cable? a. Immunity from interference b. No electrical safety problems c. Excellent data security d. Lower cost

Last Answer : b. No electrical safety problems

The core of a fiber optic is surrounded by a. Wire braid shield b. Kevlar c. Cladding d. Plastic insulation

Description : The core of a fiber optic is surrounded by a. Wire braid shield b. Kevlar c. Cladding d. Plastic insulation

Last Answer : c. Cladding

The core of a fiber optic cable is made of a. Air b. Glass c. Diamond d. Quartz

Description : The core of a fiber optic cable is made of a. Air b. Glass c. Diamond d. Quartz

Last Answer : b. Glass

Which of the following is not a common type of fiber-optic cable? a. Single-mode step-index b. Multimode graded-index c. Single-mode graded-index d. Multimode step-index

Description : Which of the following is not a common type of fiber-optic cable? a. Single-mode step-index b. Multimode graded-index c. Single-mode graded-index d. Multimode step-index

Last Answer : c. Single-mode graded-index

The operation of the fiber-optic cable is based on the principle of a. Refraction b. Reflection c. Dispersion d. Absorption

Description : The operation of the fiber-optic cable is based on the principle of a. Refraction b. Reflection c. Dispersion d. Absorption

Last Answer : b. Reflection

Which of the following is not a common application of fiber-optic cable? a. Computer networks b. Long-distance telephone systems c. Closed circuit TV d. Consumer TV

Description : Which of the following is not a common application of fiber-optic cable? a. Computer networks b. Long-distance telephone systems c. Closed circuit TV d. Consumer TV

Last Answer : d. Consumer TV

Fiber optic cables operate at frequencies near a. 20MHz b. 200MHz c. 2GHz d. 800THz

Description : Fiber optic cables operate at frequencies near a. 20MHz b. 200MHz c. 2GHz d. 800THz

Last Answer : d. 800THz

What medium is used by IBM token ring network that operates at either 4 Mbps or 16 Mbps? A. Twisted pair B. Coaxial cable C. Fiber-optic D. Parallel-wire line

Description : What medium is used by IBM token ring network that operates at either 4 Mbps or 16 Mbps? A. Twisted pair B. Coaxial cable C. Fiber-optic D. Parallel-wire line

Last Answer : A. Twisted pair

What is the device used in fiber optic communication which consist of a receiver transmitter use to clean up and amplify digital data moving in one direction and another in the opposite direction? A. Optic compressors B. Optic retarders C. Optic isolator D. Optic regenerators

Description : What is the device used in fiber optic communication which consist of a receiver transmitter use to clean up and amplify digital data moving in one direction and another in the opposite direction? A. Optic compressors B. Optic retarders C. Optic isolator D. Optic regenerators

Last Answer : D. Optic regenerators

How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Description : How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Last Answer : D. By application of antireflection coating

How do you transmit through multiplexing, a thousand of voice channel information over a single fiber optic using on e wavelength? A. Polar division B. Time division C. Fiber division D. Frequency division

Description : How do you transmit through multiplexing, a thousand of voice channel information over a single fiber optic using on e wavelength? A. Polar division B. Time division C. Fiber division D. Frequency division

Last Answer : B. Time division

A quarter wavelength devices made of crystalline calcite that changes polarization in the optic fiber communication. A. Isolator B. Retarder C. Polarizer D. Filters

Description : A quarter wavelength devices made of crystalline calcite that changes polarization in the optic fiber communication. A. Isolator B. Retarder C. Polarizer D. Filters

Last Answer : B. Retarder

One of the advantages of fiber optic which is referred to the volume of capacity of signals it can carry. A. Security B. Weight C. Bandwidth D. Physical size

Description : One of the advantages of fiber optic which is referred to the volume of capacity of signals it can carry. A. Security B. Weight C. Bandwidth D. Physical size

Last Answer : C. Bandwidth

Ho w many times bigger does the bandwidth of a fiber optic multimode have over a cable? A. 50 times bigger B. 100 times bigger C. 10 times bigger D. 5 times bigger

Description : Ho w many times bigger does the bandwidth of a fiber optic multimode have over a cable? A. 50 times bigger B. 100 times bigger C. 10 times bigger D. 5 times bigger

Last Answer : B. 100 times bigger

If a fiber optic system has a rise time of 38.55 ns, the source rise time is 12 ns and the detector rise time is 12 ns, what is the cable rise time? A. 34.61 ns B. 14.55 ns C. 52.55 ns D. 26.25 ns

Description : If a fiber optic system has a rise time of 38.55 ns, the source rise time is 12 ns and the detector rise time is 12 ns, what is the cable rise time? A. 34.61 ns B. 14.55 ns C. 52.55 ns D. 26.25 ns

Last Answer : A. 34.61 ns

The most common device used as a light detector in fiber optic communications system. A. LED B. Darlington phototransistor C. APDs D. PIN diode

Description : The most common device used as a light detector in fiber optic communications system. A. LED B. Darlington phototransistor C. APDs D. PIN diode

Last Answer : C. APDs

Fiber optic cable operates near _______ frequencies. A. 800 THz B. 20 MHz C. 200 MHz D. 2 GHz

Description : Fiber optic cable operates near _______ frequencies. A. 800 THz B. 20 MHz C. 200 MHz D. 2 GHz

Last Answer : A. 800 THz

If a fiber optic system has a rise time of 16 ns, the source rise time is 1.5 ns and the detector rise time is 2 ns, what is the cable rise time? A. 14 ns B. 6 ns C. 9 ns D. 12.5 ns

Description : If a fiber optic system has a rise time of 16 ns, the source rise time is 1.5 ns and the detector rise time is 2 ns, what is the cable rise time? A. 14 ns B. 6 ns C. 9 ns D. 12.5 ns

Last Answer : A. 14 ns

ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Description : ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Last Answer : B. Communications satellite

Which statement about bias in social studies sources is true A) most social studies sources are unbiased b)bias most often found in primary sources c) bias often found in secondary sources d) most social studies sources contain some bias?

Description : Which statement about bias in social studies sources is true A) most social studies sources are unbiased b)bias most often found in primary sources c) bias often found in secondary sources d) most social studies sources contain some bias?

Last Answer : a) most social studies sources are unbiased.

A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Description : A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Last Answer : Increases.

Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Description : Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Last Answer : (d) amplification

What is the basic technique used to stabilize a satellite? A. Gravity-forward motion balance B. Spin C. Thruster control D. Solar panel orientation 62. The jet thrusters are usually

Description : What is the basic technique used to stabilize a satellite? A. Gravity-forward motion balance B. Spin C. Thruster control D. Solar panel orientation 62. The jet thrusters are usually

Last Answer : B. Spin

For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Description : For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Last Answer : (c) reverse biased

In forward bias, the width of potential barrier __________ (a) Increases (b) decreases (c) remains same (d) no effect

Description : In forward bias, the width of potential barrier __________ (a) Increases (b) decreases (c) remains same (d) no effect

Last Answer : (b) decreases

What distortion is not caused by transmission line characteristics? A. Phase distortion B. Pulse shape distortion C. Spacing bias distortion D. Amplitude distortion

Description : What distortion is not caused by transmission line characteristics? A. Phase distortion B. Pulse shape distortion C. Spacing bias distortion D. Amplitude distortion

Last Answer : C. Spacing bias distortion

Define input bias current?

Description : Define input bias current?

Last Answer : It is defined as the average of the currents entering into the input terminals of an op-amp.

What are the advantages of fixed bias circuit?

Description : What are the advantages of fixed bias circuit?

Last Answer : This is simple circuit which uses a few components. The operating point can be fixed any where on the Centre of the active region

ECE Board Exam March 1996 What is the purpose of the receiver’s squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent fluctuations in the AGC bias level C. To reduce the receiver’s sensitivity to all incoming signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Description : ECE Board Exam March 1996 What is the purpose of the receiver's squelch circuit? A. To overcome fluctuations in the level the RF signal arriving at the receiver antenna B. To prevent ... signals D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Last Answer : D. To prevent amplified noise from reaching the loudspeaker during the absence of an incoming signal

Optic fibres are used in place of wire cables because (1) they generate strong magnetic fields (2) they do not generate magnetic fields (3) they do not require boosting (4) they are more economical

Description : Optic fibres are used in place of wire cables because (1) they generate strong magnetic fields (2) they do not generate magnetic fields (3) they do not require boosting (4) they are more economical

Last Answer : they do not generate magnetic fields

Surging basically implies A. Unsteady, periodic and reversed flow B. Forward motion of air at a speed above sonic velocity C. The surging action due to the blast of air produced in a compressor D. Forward movement of aircraft

Description : Surging basically implies A. Unsteady, periodic and reversed flow B. Forward motion of air at a speed above sonic velocity C. The surging action due to the blast of air produced in a compressor D. Forward movement of aircraft

Last Answer : ANSWER : A

The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward biased and the cathode-gate is forward biased C. source-gate is forward biased and the gate-drain is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

How are PIN photodiodes usually biased?

Description : How are PIN photodiodes usually biased?

Last Answer : Reverse-biased.

Photodiodes operate properly with:

Description : Photodiodes operate properly with:

Last Answer : reverse bias

What is the advantage of PTM over PAM? A. All of these B. Low sampling rate is required C. Much better noise immunity D. Simpler to generate

Description : What is the advantage of PTM over PAM? A. All of these B. Low sampling rate is required C. Much better noise immunity D. Simpler to generate

Last Answer : C. Much better noise immunity

Junction breakdown occurs: a) With forward bias b) With reverse bias c) Under high temperature condition d) Because of excess heating of the diode

Description : Junction breakdown occurs: a) With forward bias b) With reverse bias c) Under high temperature condition d) Because of excess heating of the diode

Last Answer : Ans: B

In the illustration, the small battery and Rb are in the circuit to apply ________. EL-0022 A. forward bias to the emitter-base B. reverse bias to the emitter-base C. a 'reference charge' on the input capacitor D. a buffer between the input ground and the emitter ground

Description : In the illustration, the small battery and Rb are in the circuit to apply ________. EL-0022 A. forward bias to the emitter-base B. reverse bias to the emitter-base C. a 'reference charge' on the input capacitor D. a buffer between the input ground and the emitter ground

Last Answer : Answer: A

In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Description : In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Last Answer : Answer: D

When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Description : When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Last Answer : Answer: B

A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Description :  A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Last Answer : reverse bias diode