Why efficiency of gas turbines is lower compared to I.C. engines ?

Why efficiency of gas turbines is lower compared to I.C. engines ?
by

1 Answer

Answer :

In gas turbines, 70% of the output of gas turbine is consumed by compressor. I.C. engines have much lower auxiliary consumption. Further combustion temperature of I.C. engines is much higher compared to gas turbine.
by

Related questions

For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency

Description : For same power output and same r, as compared to 2- stroke engines, four stroke SI engines have (a) Higher fuel consumption (b) Lower thermal efficiency (c) Highest exhaust temperatures (d) Higher thermal efficiency

Last Answer : Ans :d

Supercharging is essential in A. aircraft engines B. petrol engines C. gas turbines D. diesel engines

Description : Supercharging is essential in A. aircraft engines B. petrol engines C. gas turbines D. diesel engines

Last Answer : ANSWER : A

Why thermal efficiency of I.C. engines is more than that of gas turbine plant ?

Description : Why thermal efficiency of I.C. engines is more than that of gas turbine plant ?

Last Answer : In I.C. engine maximum temperature attained is higher than in gas turbine.

What is the effect of inter cooling in gas turbines ?

Description : What is the effect of inter cooling in gas turbines ?

Last Answer : It decreases thermal efficiency but increases net output.

Why axial flow compressor is preferred for gas turbines for aeroplanes ?

Description : Why axial flow compressor is preferred for gas turbines for aeroplanes ?

Last Answer : Because it has low frontal area.

Maximum combustion temperature in gas turbines is of the order of 1100 to 10°C whereas same is around 00°C in I.C. engine ? Why ?

Description : Maximum combustion temperature in gas turbines is of the order of 1100 to 10°C whereas same is around 00°C in I.C. engine ? Why ?

Last Answer : High temperature in I.C. engine can be tolerated because it lasts for a fraction of second but gas turbines have to face it continuously which metals can’t withstand.

It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Description : It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery.  a. Dual Cycle  b. Otto Cycle  c. Carnot Cycle  d. Brayton Cycle

Last Answer : Brayton Cycle

Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by NOx emission is much higher by four stroke petrol engines as compared to the two stroke engines (C) Temperature in stratosphere rises with increasing altitude (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Description : Pick out the wrong statement. (A) Biological oxygen demand (B.O.D.) value of a sewerage sample is always lower than its chemical oxygen demand (C.O.D.) value (B) Environmental pollution by ... in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

Last Answer : (D) The characteristic of a green house body is that it allows the long wavelength incoming solar radiation to come in but does not allow the short wavelength infra red radiation to escape out of the earth's atmosphere

In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Boiler efficiency is a measure of how effectively _______ energy in fuel is converted into heat energy in steam going to the turbines A Chemical energy B Heat energy C Thermal energy D All of the above

Description : Boiler efficiency is a measure of how effectively _______ energy in fuel is converted into heat energy in steam going to the turbines A Chemical energy B Heat energy C Thermal energy D All of the above

Last Answer : A Chemical energy

Consider efficiencies of hydro-turbines and generators. If the efficiency of a hydro-turbine is 80% and the efficiency of a generator is 90%, what is the overall efficiency of the unit? w) 85% x) 72% y) 90% z) 70%

Description : Consider efficiencies of hydro-turbines and generators. If the efficiency of a hydro-turbine is 80% and the efficiency of a generator is 90%, what is the overall efficiency of the unit? w) 85% x) 72% y) 90% z) 70% 

Last Answer : ANSWER: X -- 72%

What Are Topping And Superposed Turbines?

Description : What Are Topping And Superposed Turbines?

Last Answer : Topping and superposed turbines arc highpressure, noncondensing units that can be added to an older, moderatepressure plant. Topping turbines receive highpressure steam from new highpressure boilers. The exhaust steam ... the same pressure as the old boilers and is used to supply the old turbines.

What Are The Two Basic Types Of Steam Turbines?

Description : What Are The Two Basic Types Of Steam Turbines?

Last Answer : 1. Impulse type. 2. Reaction type.

77. type of generator are made use in wind turbines. a) Recreational generators b) Synchronous generator c) Asynchronous generator d) Alternator

Description : 77. type of generator are made use in wind turbines. a) Recreational generators b) Synchronous generator c) Asynchronous generator d) Alternator

Last Answer : Asynchronous generator

34. The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer : Energy Performance

The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer :  Energy Performance 

If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Description : If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Last Answer : Answer : c

Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Description : Which of the following engines was introduced by a German engineer, Nickolas Otto?  a. Gasoline engine  b. Diesel engine  c. Gas turbine  d. Thermal engine

Last Answer : Gasoline engine

Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Description : Which of the following engines is the most efficient?  a. Gas turbine  b. Diesel engine  c. Carnot engine  d. Gasoline engine

Last Answer : Carnot engine

Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Description : Combustion of pulverised coal compared to the lumpy coal (A) Provides better control of furnace temperature (B) Facilitates combustion with lower excess air (C) Provides higher thermal efficiency & flame temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Higher the number of stars, lower will be the Efficiency. e. True b) False

Description : Higher the number of stars, lower will be the Efficiency. e. True b) False

Last Answer : FALSE

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

Liquid fuels have lower efficiency than solid fuels.  A. True  B. False

Description : Liquid fuels have lower efficiency than solid fuels.  A. True  B. False

Last Answer : Answer: B

The more effective way of increasing efficiency of Carnot engine is to  (a) increase higher temperature  (b) decrease higher temperature  (c) increase lower temperature  (d) decrease lower temperature  (e) keep lower temperature constant.

Description : The more effective way of increasing efficiency of Carnot engine is to  (a) increase higher temperature  (b) decrease higher temperature  (c) increase lower temperature  (d) decrease lower temperature  (e) keep lower temperature constant.

Last Answer : Answer : d

Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine

Description : Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine

Last Answer : ANSWER : D

Measuring Biochemical Oxygen Demand (BOD) is a method used for (a) estimating the amount of organic matter in sewage water (b) working out the efficiency of oil driven automobile engines (c) measuring the activity of Saccharomyces cerevisiae in producing curd on a commercial scale (d) working out the efficiency of RBCs about their capacity to carry oxygen.

Description : Measuring Biochemical Oxygen Demand (BOD) is  a method used for  (a) estimating the amount of organic matter in  sewage water (b) working out the efficiency of oil driven  automobile engines ... commercial  scale (d) working out the efficiency of RBCs about their  capacity to carry oxygen.

Last Answer : (a) estimating the amount of organic matter in  sewage water

Measuring Biochemical Oxygen Demand (BOD) is a method used for (a) estimating the amount of organic matter in sewage water (b) working out the efficiency of oil driven automobile engines (c) measuring the activity of Saccharomyces cerevisiae in producing curd on a commercial scale (d) working out the efficiency of RBCs about their capacity to carry oxygen.

Description : Measuring Biochemical Oxygen Demand (BOD) is a method used for (a) estimating the amount of organic matter in sewage water (b) working out the efficiency of oil driven automobile engines (c) ... a commercial scale (d) working out the efficiency of RBCs about their capacity to carry oxygen.

Last Answer : (a) estimating the amount of organic matter in sewage water

Which Has More Efficiency: Diesel Engine Or Petrol Engines?

Description : Which Has More Efficiency: Diesel Engine Or Petrol Engines?

Last Answer : Off course Diesel engine has the better efficiency out of two.

Among which locomotive steam engines have the highest efficiency? a) 1 MW b) 2 MW c) 30 MW d) 660 MW

Description : Among which locomotive steam engines have the highest efficiency? a) 1 MW b) 2 MW c) 30 MW d) 660 MW

Last Answer : d) 660 MW

72. Measuring Biochemical Oxygen Demand (BOD) is a method used for (1) Working out the efficiency of R.B.Cs. about their capacity to carry oxygen (2) Estimating the amount of organic matter is sewage water (3) Working out the efficiency of oil driven automobile engines (4) Measuring the activity of Sacccharomyces cerevisae in producing curd on a commercial scale

Description : 72. Measuring Biochemical Oxygen Demand (BOD) is a method used for (1) Working out the efficiency of R.B.Cs. about their capacity to carry oxygen (2) Estimating the amount of ... driven automobile engines (4) Measuring the activity of Sacccharomyces cerevisae in producing curd on a commercial scale

Last Answer : Estimating the amount of organic matter is sewage water

In steam and gas turbines, rolling contact bearings are used. a) True b) False

Description : In steam and gas turbines, rolling contact bearings are used. a) True b) False

Last Answer : b) False

Steam is regularly used for propulsion (as a driving force) in applications such as ________ turbines. • Gas turbine • Steam turbine • Water turbine

Description : Steam is regularly used for propulsion (as a driving force) in applications such as ________ turbines. • Gas turbine • Steam turbine • Water turbine

Last Answer : • Steam turbine

Which are the reference fuels for knock rating of S.I. engines ?

Description : Which are the reference fuels for knock rating of S.I. engines ?

Last Answer : n-heptane and ISO-octane.

Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Description : Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Last Answer : Iso-octane permits highest compression without causing knocking.

Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Description : Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ?

Last Answer : Iso-octane permits highest compression without causing knocking

Horse power of I.C. engines can be expressed as RAC rating, SAE rating, or DIN rating. To which countries these standards belong ?

Description : Horse power of I.C. engines can be expressed as RAC rating, SAE rating, or DIN rating. To which countries these standards belong ?

Last Answer : U.K., USA and Germany respectively.

In some engines glycerine is used in place of water for cooling of engine. Why ?

Description : In some engines glycerine is used in place of water for cooling of engine. Why ?

Last Answer : Glycerine has boiling point of 90°C which increases its heat carrying capacity. Thus weight of coolant gets reduced and smaller radiator can be used.

Production of tractors, motor, engines and process equipment is domain of organised a) Unorganised sector b) Organised sector c) Both of the above d) None of above

Description : Production of tractors, motor, engines and process equipment is domain of organised a) Unorganised sector b) rOrganised sector c) Both of the above d) None of above

Last Answer : Organised sector

The production of irrigation pumps and diesel engines started during……. a)1950s b)1930s c)1940s d)2000s

Description : The production of irrigation pumps and diesel engines started during……. a)1950s b)1930s c)1940s d)2000s

Last Answer : 1930S

Which of the following engines is the most efficient?  a. Isobaric expansion  b. Adiabatic compression  c. Adiabatic expansion  d. Isothermal expansion

Description : Which of the following engines is the most efficient?  a. Isobaric expansion  b. Adiabatic compression  c. Adiabatic expansion  d. Isothermal expansion

Last Answer : Isobaric expansion

Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Description : Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Last Answer : External combustion engine

Gasoline and Diesel Engines are best described by the _________.  a. Otto Cycle  b. Burnign Cycle  c. Shikki Cycle  d. Shapa R’ Elli Cycle

Description : Gasoline and Diesel Engines are best described by the _________.  a. Otto Cycle  b. Burnign Cycle  c. Shikki Cycle  d. Shapa R’ Elli Cycle

Last Answer : Otto Cycle

What states that thermal efficiencies of all reversible heat engines operating between the same two reservoirs are the same and that no heat engine is more efficient than a reversible one operating between the same two reservoirs?  A. Ericson principle  B. Carnot principle  C. Otto principle  D. Stirling principle

Description : What states that thermal efficiencies of all reversible heat engines operating between the same two reservoirs are the same and that no heat engine is more efficient than a reversible one operating between the ... A. Ericson principle  B. Carnot principle  C. Otto principle  D. Stirling principle

Last Answer : Carnot principle

The compression ratio for Diesel engines is  A. 3 to 6  B. 5 to 8  C. 15 to 20  D. 20 to 30

Description : The compression ratio for Diesel engines is  A. 3 to 6  B. 5 to 8  C. 15 to 20  D. 20 to 30

Last Answer : Answer: C

Which is the incorrect statement about Carnot cycle?  A. It is used as the alternate standard of comparison of all heat engines.  B. All the heat engines are based on Carnot cycle.  C. It provides concept of maximising work output between the two temperature limits.  D. all of the above

Description : Which is the incorrect statement about Carnot cycle?  A. It is used as the alternate standard of comparison of all heat engines.  B. All the heat engines are based on Carnot cycle.  C. It provides concept of maximising work output between the two temperature limits.  D. all of the above

Last Answer : Answer: B

The compression ratio for petrol engines is  A.3 to 6  B.5 to 8  C.15 to 20  D.20 to 30

Description : The compression ratio for petrol engines is  A.3 to 6  B.5 to 8  C.15 to 20  D.20 to 30

Last Answer : Answer: B

Zeroth law of thermodynamics  (a) deals with conversion of mass and energy  (b) deals with reversibility and irreversibility of process  (c) states that if two systems are both in equilibrium with a third system, they are in thermal equilibrium with each other  (d) deals with heat engines  (e) does not exist.

Description : Zeroth law of thermodynamics  (a) deals with conversion of mass and energy  (b) deals with reversibility and irreversibility of process  (c) states that if two systems are both in equilibrium with a ... in thermal equilibrium with each other  (d) deals with heat engines  (e) does not exist.

Last Answer : Answer : c

measures oxygen and temperature of the flue gas. a) Fuel efficiency monitor. b) Combustion analyzer. c) Contact thermometer. d) Infrared thermometer.

Description : measures oxygen and temperature of the flue gas. a) Fuel efficiency monitor. b) Combustion analyzer. c) Contact thermometer. d) Infrared thermometer.

Last Answer : Combustion analyzer

The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Description : The efficiency and work ratio of a simple gas turbine cycle are  A.low  B.very low  C.high  D.very high

Last Answer : Answer: B

The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Description : The efficiency of Carnot cycle is maximum for  (a) gas engine  (b) well lubricated engine  (c) petrol engine  (d) steam engine  (e) reversible engine.

Last Answer : Answer : e