34. The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None
by

1 Answer

Answer :

Energy Performance

by

Related questions

The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer :  Energy Performance 

Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Last Answer : EER = 3.42 COP

A manufacturing industry plans to improve its energy performance under PAT through implementation of an energy conservation scheme. After implementation, calculate the Plant Energy Performance (PEP) with 2015-16 as the reference year. What is your inference? Given that:  The current year (2016-17 ) Annual Production – 28,750 T ,  Current year (2016-17 ) Annual Energy Consumption– 23,834 MWh,  Reference year (2015-16 ) production - 34,000 T,  Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Description : A manufacturing industry plans to improve its energy performance under PAT through  implementation of an energy conservation scheme. After implementation, calculate the  Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T,   Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF   = 27,200 x 0.846= 23011MWh

31. Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Description : Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Last Answer : Energy substitution

_____ energy performance/ efficiency. a] Allocating c] Allocating b] Checking d] Determining

Description : _____ energy performance/ efficiency. a] Allocating c] Allocating b] Checking d] Determining

Last Answer : determining

The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Last Answer : Energy efficiency RATIO (EER).

The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Last Answer : Minimum energy performance standards

What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Description : What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Last Answer : Energy efficiency rating

The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Description : The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Last Answer : All of the above

Energy audit is conducted by…….. a) government b) Company c) Energy utilization unit d) Auditor

Description : Energy audit is conducted by…….. a) government b) Company c) Energy utilization unit d) Auditor

Last Answer : Energy utilization unit

If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Description : If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Last Answer : Ans :c

What is the role of virtualization in cloud computing? A. It removes operating system inefficiencies. B. It improves the performance of web applications. C. It optimizes the utilization of computing resources. D. It adds extra load to the underlying physical infrastructure and has no role in cloud computing.

Description : What is the role of virtualization in cloud computing? A. It removes operating system inefficiencies. B. It improves the performance of web applications. C. It optimizes the utilization of ... . It adds extra load to the underlying physical infrastructure and has no role in cloud computing.

Last Answer : It adds extra load to the underlying physical infrastructure and has no role in cloud computing.

What is the role of virtualization in cloud computing? A. It removes operating system inefficiencies. B. It improves the performance of web applications. C. It optimizes the utilization of computing resources. D. It adds extra load to the underlying physical infrastructure and has no role in cloud computing

Description : What is the role of virtualization in cloud computing? A. It removes operating system inefficiencies. B. It improves the performance of web applications. C. It optimizes the utilization of ... . It adds extra load to the underlying physical infrastructure and has no role in cloud computing

Last Answer : It adds extra load to the underlying physical infrastructure and has no role in cloud computing.

Planned Planned capacity capacity is: a)Planned capacity = Demonstrated capacity * Efficiency * Utilization factor b)Planned capacity = Designed capacity * Efficiency / Utilization factor c)Planned capacity = Designed capacity * Efficiency * Utilization factor d) None of the above

Description : Planned Planned capacity capacity is: a)Planned capacity = Demonstrated capacity * Efficiency * Utilization factor b)Planned capacity = Designed capacity * Efficiency / Utilization factor c)Planned capacity = Designed capacity * Efficiency * Utilization factor d) None of the above

Last Answer : b)Planned capacity = Designed capacity * Efficiency / Utilization factor

Define following parameter of rectifier: (i) Ripple factor (ii) Efficiency (iii) Peak Inverse Voltage (iv) Transformer utilization factor

Description : Define following parameter of rectifier: (i) Ripple factor (ii) Efficiency (iii) Peak Inverse Voltage (iv) Transformer utilization factor

Last Answer : (i) Ripple Factor - Ripple factor (γ) may be defined as the ratio of the root mean square (rms) value of the ripple voltage to the absolute value of the DC component of the ... the same rectifier. Effective VA Rating of transformer is the average of primary and secondary VA rating of transformer.

The hyperboloid shape also aids in accelerating the upward convective air flow, improving ________ efficiency. • Performance • Cooling • Heating • All of the above

Description : The hyperboloid shape also aids in accelerating the upward convective air flow, improving ________ efficiency. • Performance • Cooling • Heating • All of the above

Last Answer : cooling

Why efficiency of gas turbines is lower compared to I.C. engines ?

Description : Why efficiency of gas turbines is lower compared to I.C. engines ?

Last Answer : In gas turbines, 70% of the output of gas turbine is consumed by compressor. I.C. engines have much lower auxiliary consumption. Further combustion temperature of I.C. engines is much higher compared to gas turbine.

If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Description : If both Stirling and Carnot cycles operate within the same temperature limits, then efficiency of Stirling cycle as compared to Carnot cycle  (a) more  (b) less  (c) equal  (d) depends on other factors  (e) none of the above.

Last Answer : Answer : c

Amount of work completed to date compared with planned in the Earned Value Management method is A. Schedule Performance Index B. Cost Performance Index C. Percentage Complete D .Percentage Spent

Description : Amount of work completed to date compared with planned in the Earned Value  Management method is  A. Schedule Performance Index  B. Cost Performance Index  C. Percentage Complete  D .Percentage Spent

Last Answer : C. Percentage Complete

30. The ratio of current year‘s production to the reference year‘s production is called as a) Demand factor b) Production factor c) Utilisation factor d) Load factor

Description : The ratio of current year‘s production to the reference year‘s production is called as a) Demand factor b) Production factor c) Utilisation factor d) Load factor

Last Answer : Production factor 

Which constituent in the cell has a high rate of utilization as energy a. Carbohydrates b. Fats c. Proteins d. Water

Description : Which constituent in the cell has a high rate of utilization as energy a. Carbohydrates b. Fats c. Proteins d. Water

Last Answer : Carbohydrates

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

A marketing plan usually begins with a(n) A)executive summary. B)introduction to the company's marketing objectives. C)summary of current performance as compared with past performance. D)situation analysis. E)opportunity and threat analysis.

Description : A marketing plan usually begins with a(n) A)executive summary. B)introduction to the company's marketing objectives. C)summary of current performance as compared with past performance. D)situation analysis. E)opportunity and threat analysis.

Last Answer : A)executive summary.

The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct

Description : The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct

Last Answer :  All are correct

Capacity utilization - (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital stock used for current production. (4) rises as the economy moves into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Description : Capacity utilization - (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital ... into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Last Answer : (3) is a measure of the proportional of the existing capital stock used for current production. Explanation: Capacity utilisation refers to the extent or level to which the productive capacity of a ... as a percentage, it is computed by dividing the total capacity with the portion being utilized.

Which of the following statements reflect current research regarding the utilization of non-pharmacological measures in the management of burn pain? a) Music therapy may provide reality orientation, distraction, and sensory stimulation. Researchers have found that music affects both the physiologic and psychological aspects of the pain experience. Music diverts the patient’s attention away from the painful stimulus. Music may also provide reality orientation, distraction, and sensory stimulation. It also allows for patient self-expression.

Description : Which of the following statements reflect current research regarding the utilization of non-pharmacological measures in the management of burn pain? a) Music therapy may provide reality orientation, distraction, ... of burn pain. Pet therapy has not proven effective in the management of burn pain.

Last Answer : a) Music therapy may provide reality orientation, distraction, and sensory stimulation. Researchers have found that music affects both the physiologic and psychological aspects of the pain experience ... orientation, distraction, and sensory stimulation. It also allows for patient self-expression.

Why rate of condensation is higher on a polished surface compared to rusty surface ?

Description : Why rate of condensation is higher on a polished surface compared to rusty surface ?

Last Answer : Polished surface promotes drop wise condensation and does not wet the surface.

What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Description : What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Last Answer : Becomes negative

What form of energy refers to those a system possesses as a whole with respect to some outside reference frame, such as potential and kinetic energies?  A. Macroscopic form of energy  B. Microscopic form of energy  C. Internal energy  D. External energy

Description : What form of energy refers to those a system possesses as a whole with respect to some outside reference frame, such as potential and kinetic energies?  A. Macroscopic form of energy  B. Microscopic form of energy  C. Internal energy  D. External energy

Last Answer : Macroscopic form of energy

The utilization of light energy to drive the synthesis of ATP is called as a. Photolysis b. Photophosphorylation c. Photosynthesis d. Respiration

Description : The utilization of light energy to drive the synthesis of ATP is called as a. Photolysis b. Photophosphorylation c. Photosynthesis d. Respiration

Last Answer : Ans: C

The centroid of the area between the circle x2 + y2 = 16 and the line x + y = 4 will have the coordinates a.(4, 2) b.(2, 4) c.(2.34, 2.34) d.(1.16, 1.16) e.None of the above

Description : The centroid of the area between the circle x2 + y2 = 16 and the line x + y = 4 will have the coordinates a.(4, 2) b.(2, 4) c.(2.34, 2.34) d.(1.16, 1.16) e.None of the above

Last Answer : c. (2.34, 2.34)

Which of the following statement(s) is/are true concerning metabolic derangements in sepsis and the systemic inflammatory response syndrome which may follow progressive shock? a. Alterations in glucose metabolism lead to the development of efficient substrate utilization b. A progressive rise in serum triglyceride levels result from less efficient clearance and increased hepatic lipogenesis c. A net negative nitrogen balance occurs due to the oxidative metabolism of proteins to meet energy needs d. The serum aromatic amino acids fall rapidly as they are actively used in oxidative metabolism

Description : Which of the following statement(s) is/are true concerning metabolic derangements in sepsis and the systemic inflammatory response syndrome which may follow progressive shock? a. Alterations in glucose ... The serum aromatic amino acids fall rapidly as they are actively used in oxidative metabolism

Last Answer : Answer: b, c A broad spectrum of metabolic abnormalities become apparent in sepsis and the systemic inflammatory response syndrome following shock. Disruption of the normal cycles of carbohydrate, ... acetyl coenzyme A. This results in reduced serum level of leucine, isoleucine and valine

The function of hemoglobin is------? A. Transportation of oxygen (Answer) B. Destruction of bacteria C. Prevention of anemia D. Utilization of energy

Description : The function of hemoglobin is------? A. Transportation of oxygen (Answer) B. Destruction of bacteria C. Prevention of anemia D. Utilization of energy

Last Answer : A. Transportation of oxygen (Answer)

The function of hemoglobin is A.Transportation of oxygen B.Destruction of bacteria C.Prevention of anemia D.Utilization of energy

Description : The function of hemoglobin is A.Transportation of oxygen B.Destruction of bacteria C.Prevention of anemia D.Utilization of energy

Last Answer : A.Transportation of oxygen

is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS). c) Plant Energy Performance (PEP) b) Revolutions Per Minute (RPM) d) Option (a) and (b)

Description : is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS). c) Plant Energy Performance (PEP) b) Revolutions Per Minute (RPM) d) Option (a) and (b)

Last Answer : Plant Energy Performance (PEP)

is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS) b) Plant Energy Performance (PEP) c) Revolutions Per Minute (RPM) d) Option (a) and (b)

Description : is the measure of whether a plant is now using more or less energy to manufacture its product than it did in the past. a) Total Dissolved Solids (TDS) b) Plant Energy Performance (PEP) c) Revolutions Per Minute (RPM) d) Option (a) and (b)

Last Answer : Plant Energy Performance (PEP)

The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking

Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking

Last Answer : Bench marking

22. The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used

Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used

Last Answer : Bench marking

Function of endorsement label is ___. a) Gives necessary information b) Target limits on energy performance c) Allow consumers to compare the energy consumption of similar products d) Provide a certification to inform prospective purchasers

Description : Function of endorsement label is ___. a) Gives necessary information b) Target limits on energy performance c) Allow consumers to compare the energy consumption of similar products d) Provide a certification to inform prospective purchasers

Last Answer : Provide a certification to inform prospective purchasers

The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance

Description : The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance

Last Answer : Allow consumers to compare the energy consumption of similar products

The meaning of standard are a) Target limits on energy performance b) Well defined test protocols to obtain a sufficiently accurate estimate c) Both are correct d) Both are wrong

Description : The meaning of standard are a) Target limits on energy performance b) Well defined test protocols to obtain a sufficiently accurate estimate c) Both are correct d) Both are wrong

Last Answer : Both are correct

__________ are the function of a label. a) Well defined test protocols b) Target limits on energy performance b) Disseminate information on the benefits to consumers d) Describes energy performance

Description : __________ are the function of a label. a) Well defined test protocols b) Target limits on energy performance b) Disseminate information on the benefits to consumers d) Describes energy performance

Last Answer : Describes energy performance

________ energy use, so that projects intended to improve energy efficiency can be checked. a] Recording c] Checking b] Controlling. d]Allocating

Description : ________ energy use, so that projects intended to improve energy efficiency can be checked. a] Recording c] Checking b] Controlling. d]Allocating

Last Answer : Recording

Future energy use is likely to vary if you change____ of your business a) Labour. b) Funds c) Aspects d) Efficiency

Description : Future energy use is likely to vary if you change____ of your business a) Labour. b) Funds c) Aspects d) Efficiency

Last Answer : Aspects

According to……………… ―energy audit‖ means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis and an action plan to reduce energy consumption a) Energy conservation act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Description : According to -energy audit means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis ... act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Last Answer : Energy conservation act 2001

The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Description : The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Last Answer : Star Rating

To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Description : To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Last Answer : Energy Management 

The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Description : The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Last Answer : 2006

is the key to a systematic approach for decision making in the area of energy management. a) Energy Audit c) Energy management b) Efficiency d) None of the above

Description : is the key to a systematic approach for decision making in the area of energy management. a) Energy Audit c) Energy management b) Efficiency d) None of the above

Last Answer : Energy Audit

Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Description : Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Last Answer : 1 MARCH 2002