Under virtual storage ________ A. Two or more programs are stored in primary storage B. Only active pages of a program in primary storage C. Inter-program, interference may occur D. None of the Above

Under virtual storage ________ A. Two or more programs are stored in primary storage B. Only active pages of a program in primary storage C. Inter-program, interference may occur D. None of the Above
by

1 Answer

Answer :

B. Only active pages of a program in primary storage
by
selected

Related questions

Which of the following is used to hold running program instructions? a) Primary Storage b) Virtual Storage c) Internal Storage d) Minor Devices

Description : Which of the following is used to hold running program instructions? a) Primary Storage b) Virtual Storage c) Internal Storage d) Minor Devices

Last Answer : Answer: a Explanation: The primary storage is responsible for holding the data, intermediate results and the results of ongoing processes or jobs. Virtual storage is the main memory storage required for saving large amount of data for future reference. The other options are invalid

_____________is a feature of an operating system that allows a computer to compensate for shortages of physical memory by temporarily transferring pages of data from RAM to disk storage. A. Flash memory B. Virtual memory C. Buffer D. None of the Above

Description : _____________is a feature of an operating system that allows a computer to compensate for shortages of physical memory by temporarily transferring pages of data from RAM to disk storage. A. Flash memory B. Virtual memory C. Buffer D. None of the Above

Last Answer : B. Virtual memory

Technique of using disk space to make programs believe that the system contains more Random Access Memory(RAM) than is actually available is called ______ A. Random Access Memory B. Primary Memory C. Secondary Memory D. Virtual Memory

Description : Technique of using disk space to make programs believe that the system contains more Random Access Memory(RAM) than is actually available is called ______ A. Random Access Memory B. Primary Memory C. Secondary Memory D. Virtual Memory

Last Answer : D. Virtual Memory

Suppose that the virtual Address space has eight pages and physical memory with four page frames. If LRU page replacement algorithm is used, .............. number of page faults occur with the reference string. 0 2 1 3 5 4 6 3 7 4 7 3 3 5 5 3 1 1 1 7 2 3 4 1 (A) 11 (B) 12 (C) 10 (D) 9

Description : Suppose that the virtual Address space has eight pages and physical memory with four page frames. If LRU page replacement algorithm is used, .............. number of page faults occur with the reference string. 0 2 1 3 5 4 6 3 7 4 7 3 3 5 5 3 1 1 1 7 2 3 4 1 (A) 11 (B) 12 (C) 10 (D) 9

Last Answer : (A) 11

The two basic types of memory in a computer are ________ a) Primary and major b) Primary and Secondary c) Minor and Major d) Main and virtual

Description : The two basic types of memory in a computer are ________ a) Primary and major b) Primary and Secondary c) Minor and Major d) Main and virtual

Last Answer : Answer: b Explanation: There are two types of memories in a computer system: The Primary Memory and the Secondary Memory. The primary memory can be directly accessed by the CPU whereas the secondary memory cannot be directly accessed

Active X controls are Pentium binary programs that can be embedded in ............... (A) Word pages (B) URL pages (C) Script pages (D) Web pages

Description : Active X controls are Pentium binary programs that can be embedded in ............... (A) Word pages (B) URL pages (C) Script pages (D) Web pages

Last Answer : (D) Web pages

________ is a program that places programs into memory and prepares them for execution. (1) Assembler (2) Compiler (3) Loader (4) Macro processor

Description :  ________ is a program that places programs into memory and prepares them for execution. (1) Assembler (2) Compiler (3) Loader (4) Macro processor

Last Answer : Loader

Scattering causes: a. loss b. dispersion c. inter symbol interference d. all of the above

Description : Scattering causes: a. loss b. dispersion c. inter symbol interference d. all of the above

Last Answer : a. loss

The hardware in which data may be stored for a computer system is called ________ A. Registers B. Bus C. Control Unit D. Memory

Description : The hardware in which data may be stored for a computer system is called ________ A. Registers B. Bus C. Control Unit D. Memory

Last Answer : D. Memory

A trad-able form of loan is normally termed as ________ A. Certificate of Deposit (CD) B. Inter Bank term Money C. Bill Re-discounting D. Debt Instrument E. None of the Above

Description : A trad-able form of loan is normally termed as ________ A. Certificate of Deposit (CD) B. Inter Bank term Money C. Bill Re-discounting D. Debt Instrument E. None of the Above

Last Answer : D. Debt Instrument Explanation: A trad-able form of loan is normally termed as a Debt Instrument. They are usually obligations of issuer of such instrument as regards certain future cash flow representing Interest & Principal, which the issuer would pay to the legal owner of the Instrument.

What is the control unit's function in the CPU 1) To transfer data to primary storage . 2) TO store program instructions. 3) To perform logic functions. 4) To decode program instructions.

Description : What is the control unit's function in the CPU 1) To transfer data to primary storage . 2) TO store program instructions. 3) To perform logic functions. 4) To decode program instructions.

Last Answer : 2) choose Insert, Header and Footer, click Slide tab, select the desired options, click Apply to All

The wheel located between the two standard buttons on a mouse is used to ________ A. click in Web pages. B. scroll. C. click and select items. D. jump to different Web pages

Description : The wheel located between the two standard buttons on a mouse is used to ________ A. click in Web pages. B. scroll. C. click and select items. D. jump to different Web pages

Last Answer : B. scroll.

Printer resolution is usually measured in ________ A. Characters Per Minute (CPM) B. Pixels Per Inch (PPI) C. Pages Per Minute (PPM) D. Dots Per Inch (DPI)

Description : Printer resolution is usually measured in ________ A. Characters Per Minute (CPM) B. Pixels Per Inch (PPI) C. Pages Per Minute (PPM) D. Dots Per Inch (DPI)

Last Answer : D. Dots Per Inch (DPI)

The programs which are as permanent as hardware and stored in ROM is known as A) Hardware B) Software C) Firmware D) ROM ware

Description : The programs which are as permanent as hardware and stored in ROM is known as A) Hardware B) Software C) Firmware D) ROM ware

Last Answer : Answer : C

Programs stored in ROM are called- 1) Hardware 2) Firmware 3) Software 4) None of these

Description : Programs stored in ROM are called- 1) Hardware 2) Firmware 3) Software 4) None of these

Last Answer : 2) Firmware

The programs which are as permanent as hardware and stored in ROM is known as 1) Hardware 2) Software 3) Firmware 4) Services

Description : The programs which are as permanent as hardware and stored in ROM is known as 1) Hardware 2) Software 3) Firmware 4) Services

Last Answer : 2) Software

Programs stored in a ROM are called (1) Software (2) Freeware (3) Firmware (4) None of these

Description : Programs stored in a ROM are called (1) Software (2) Freeware (3) Firmware (4) None of these

Last Answer : Firmware

_________ is the transfer of computer data from a temporary storage area to the computer’s permanent memory. A. Flash B. Virtual C. Buffer Flush D. None of the Above

Description : _________ is the transfer of computer data from a temporary storage area to the computer’s permanent memory. A. Flash B. Virtual C. Buffer Flush D. None of the Above

Last Answer : C. Buffer Flush

_______ is a type of computing that performs computation, storage and even applications as a service across a network. (1) Cloud Computing (2) Distributed Computing (3) Parallel Computing (4) Virtual Computing

Description : _______ is a type of computing that performs computation, storage and even applications as a service across a network. (1) Cloud Computing (2) Distributed Computing (3) Parallel Computing (4) Virtual Computing

Last Answer : Cloud Computing 

A virtual memory has a page size of 1K words. There are eight pages and four blocks. The associative memory page table contains the following entries: Image Which of the following list of virtual addresses (in decimal) will not cause any page fault if referenced by the CPU? (A) 1024, 3072, 4096, 6144 (B) 1234, 4012, 5000, 6200 (C) 1020, 3012, 6120, 8100 (D) 2021, 4050, 5112, 7100

Description : A virtual memory has a page size of 1K words. There are eight pages and four blocks. The associative memory page table contains the following entries:  Which of the following list of virtual addresses (in ... 1234, 4012, 5000, 6200 (C) 1020, 3012, 6120, 8100 (D) 2021, 4050, 5112, 7100

Last Answer : Answer: C Explanation: The pages which are not in main memory are: 1020 will not cause page fault (1024-2047) 3012 will not cause page fault (3072-4095) 6120 will not cause page fault (4096-5119) 8100 will not cause page fault (6144-7167)

The ALU gives the output of the operations and the output is stored in the ________ a) Memory Devices b) Registers c) Flags d) Output Unit

Description : The ALU gives the output of the operations and the output is stored in the ________ a) Memory Devices b) Registers c) Flags d) Output Unit

Last Answer : Answer: b Explanation: Any output generated by the ALU gets stored in the registers. The registers are the temporary memory locations within the processor that are connected by signal paths to the CPU

Information stored in RAM need to be ________ A. Check B. modify C. refresh periodically D. None of the Above

Description : Information stored in RAM need to be ________ A. Check B. modify C. refresh periodically D. None of the Above

Last Answer : C. refresh periodically

Data (information) is stored in computer as ________: a) Directories b) Files c) Floppies d) Matter e) None of The Above

Description : Data (information) is stored in computer as ________: a) Directories b) Files c) Floppies d) Matter e) None of The Above

Last Answer : b) Files

Storage device where time to retrieve stored information is independent of address where it is stored is called _______ A. Random Access Memory B. Secondary Memory C. System D. None of the above

Description : Storage device where time to retrieve stored information is independent of address where it is stored is called _______ A. Random Access Memory B. Secondary Memory C. System D. None of the above

Last Answer : A. Random Access Memory

If network simulator software is installed in computer to study network without actually being connected, then will this software cause any interference when actual active network is connected?

Description : If network simulator software is installed in computer to study network without actually being connected, then will this software cause any interference when actual active network is connected?

Last Answer : No the network simulator software will not cause any problems.

If magnetic tape is stored in areas with temperature and humidity extremes, what are three types of tape damage that may occur?

Description : If magnetic tape is stored in areas with temperature and humidity extremes, what are three types of tape damage that may occur?

Last Answer : Oxide shedding, layer-to-layer sticking, and tape deformation.

Scouring will occur as long as a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face b) Frictional resistance at soil tool interface is more than the resistance at parallel soil-soil inter face c) Soil-metal friction is more than angle of soil shearing resistance d) None of the above

Description : Scouring will occur as long as a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face b) Frictional resistance at soil tool interface is more than ... c) Soil-metal friction is more than angle of soil shearing resistance d) None of the above

Last Answer : a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face

The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Description : The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Last Answer : B. Noise

What is the process of copying software programs from secondary storage media to the hard disk called? 1) Configuration 2) Download 3) Storage 4) Upload 5) Installation

Description : What is the process of copying software programs from secondary storage media to the hard disk called? 1) Configuration 2) Download 3) Storage 4) Upload 5) Installation

Last Answer : Answer :5

Which type of file is created by Word Processing Programs? 1) Database File 2) Storage File 3) Worksheet File 4) Document File

Description : Which type of file is created by Word Processing Programs? 1) Database File 2) Storage File 3) Worksheet File 4) Document File

Last Answer : 4) Document File

where are programs and data to be used by the computer available? 1) Output 2) Processing unit 3) Input 4) Storage

Description : where are programs and data to be used by the computer available? 1) Output 2) Processing unit 3) Input 4) Storage

Last Answer : 4) Storage

Related to computers, what is ‘Wetware’ ? (1) Computer programs (2) Circuitory (3) Human brain (4) Chemical storage devices

Description : Related to computers, what is ‘Wetware’ ? (1) Computer programs (2) Circuitory (3) Human brain (4) Chemical storage devices

Last Answer : Human brain

Where are programs and data to be used by the computer available? (1) Processing Unit (2) Output (3) Storage (4) Input

Description : Where are programs and data to be used by the computer available? (1) Processing Unit (2) Output (3) Storage (4) Input

Last Answer : Storage

Which of the following link building tactics do search engines tacitly endorse?  A. Viral Content Creation & Promotion  B.Reciprocal Link Exchange Programs  C.Buying Links From Link Brokers & Networks  D.Renting Pages From Trustworthy Domains And Placing Links On Them

Description : Which of the following link building tactics do search engines tacitly endorse?  A. Viral Content Creation & Promotion  B.Reciprocal Link Exchange Programs  C.Buying Links From Link Brokers & Networks  D.Renting Pages From Trustworthy Domains And Placing Links On Them

Last Answer : A. Viral Content Creation & Promotion

Light is normally incident on a thin soap film and is reflected. If the wavelength of this light is "L" and the index of refraction of the soap film is "N", complete destructive interference will occur for a film thickness of: w) L / 8N x) L / 4N y) L / 2N z) 3L / 4N

Description : Light is normally incident on a thin soap film and is reflected. If the wavelength of this light is "L" and the index of refraction of the soap film is "N", complete destructive interference will occur for a film thickness of: w) L / 8N x) L / 4N y) L / 2N z) 3L / 4N

Last Answer : ANSWER: Y -- L / 2N 

Select the correct events that occur during inspiration. (1) Contraction of diaphragm (2) Contraction of external inter-costal muscles (3) Pulmonary volume decreases (4) Intra pulmonary pressure increases (a) (1) and (2) (b) (3) and (4)

Description : Select the correct events that occur during inspiration. (1) Contraction of diaphragm (2) Contraction of external inter-costal muscles (3) Pulmonary volume decreases (4) Intra pulmonary pressure increases (a) (1) and (2) (b) (3) and (4)

Last Answer : (1) Contraction of diaphragm

What is the use of sections in a word document: a) To divide the document into parts so that each part may be independently printed when the print command is given. b) To divide the document into parts so as to allow certain parts of the document to display data from a table. c) To vary the layout of a document within a page or between pages by dividing the document into parts and then allow formatting of each part the way you want. d) None of The Above

Description : What is the use of sections in a word document: a) To divide the document into parts so that each part may be independently printed when the print command is given. b) To divide the document into ... document into parts and then allow formatting of each part the way you want. d) None of The Above

Last Answer : To vary the layout of a document within a page or between pages by dividing the document into parts and then allow formatting of each part the way you want.

_________ is a data area shared by hardware devices or program processes that operate at different speeds or with different sets of priorities. A. Flash memory B. Virtual memory C. Buffer D. None of the Above

Description : _________ is a data area shared by hardware devices or program processes that operate at different speeds or with different sets of priorities. A. Flash memory B. Virtual memory C. Buffer D. None of the Above

Last Answer : C. Buffer

If you use a social media analytics tool like True Social Metrics, what can you use it for to get a better understanding of what content is effective - and what isn't? A. Measure the real active engagement of users with your social media pages B. Compare your results against that of your competitors and learn their best practices. C. Analyze which topics and types of content are the most effective at engaging your influencers. D. All of the above

Description : If you use a social media analytics tool like True Social Metrics, what can you use it for to get a better understanding of what content is effective - and what isn't? A. Measure the real ... topics and types of content are the most effective at engaging your influencers. D. All of the above

Last Answer : D. All of the above

.......... displays the information about the active document such as page number, section number, number of pages, insertion point, position, etc. A) View Bar B) Menu Bar C) Status Bar D) Ruler Lin

Description : .......... displays the information about the active document such as page number, section number, number of pages, insertion point, position, etc. A) View Bar B) Menu Bar C) Status Bar D) Ruler Lin

Last Answer : C) Status Bar

What area in the computer's primary storage area holds the processing instructions (the program)?

Description : What area in the computer's primary storage area holds the processing instructions (the program)?

Last Answer : Program storage area.

What is the control unit's function in the CPU? a. To transfer data to primary storage b. to store program instruction c. to perform logic operations d. to decode program instruction

Description : What is the control unit's function in the CPU? a. To transfer data to primary storage b. to store program instruction c. to perform logic operations d. to decode program instruction

Last Answer : b. to store program instruction

A storage device or medium where the access time is dependent upon the location of the data is called ________ A. Parallel access B. Serial access C. Both (A) and (B) D. None of the above

Description : A storage device or medium where the access time is dependent upon the location of the data is called ________ A. Parallel access B. Serial access C. Both (A) and (B) D. None of the above

Last Answer : B. Serial access

Memories in which any location can be reached in a fixed amount of time after specifying its address is called ________ A. Sequential Access Memory B. Random Access Memory C. Quick Access Memory D. Mass storage

Description : Memories in which any location can be reached in a fixed amount of time after specifying its address is called ________ A. Sequential Access Memory B. Random Access Memory C. Quick Access Memory D. Mass storage

Last Answer : B. Random Access Memory

The term ________ refers to data storage systems that make it possible for a computer or electronic device to store and retrieve data. A. input technology B. output technology C. storage technology D. None of the Above

Description : The term ________ refers to data storage systems that make it possible for a computer or electronic device to store and retrieve data. A. input technology B. output technology C. storage technology D. None of the Above

Last Answer : C. storage technology

________ is a register for Short-term, intermediate storage of arithmetic and logic data in a Computer’s CPU. A. Accumulator B. Bus C. Buffer D. None of the Above

Description : ________ is a register for Short-term, intermediate storage of arithmetic and logic data in a Computer’s CPU. A. Accumulator B. Bus C. Buffer D. None of the Above

Last Answer : A. Accumulator

The primary purpose of software is to turn data into _____ 1) Web sites 2) Information 3) Programs 4) Objects 5) None of these

Description : The primary purpose of software is to turn data into _____ 1) Web sites 2) Information 3) Programs 4) Objects 5) None of these

Last Answer : Answer :2

Primary memory stores A) Data alone B) Programs alone C) Results alone D) All of these

Description : Primary memory stores A) Data alone B) Programs alone C) Results alone D) All of these

Last Answer : Answer : D

The primary purpose of software is to turn data into: a) Information b) Programs c) Objects d) None of These

Description : The primary purpose of software is to turn data into: a) Information b) Programs c) Objects d) None of These

Last Answer : a) Information

Primary Memory stores _______: a) Data b) Programs c) Results d) All of The Above e) None of The Above

Description : Primary Memory stores _______: a) Data b) Programs c) Results d) All of The Above e) None of The Above

Last Answer : d) All of The Above