The wavelength at which the peak of intensity of blackbody radiation Occurs – (1) increases with increase in temperature (2) decreases with increase in temperature (3) is the same at all temperatures (4) does not follow any pattern as temperature changes

The wavelength at which the peak of intensity of blackbody radiation Occurs – (1) increases with increase in temperature (2) decreases with increase in temperature (3) is the same at all temperatures (4) does not follow any pattern as temperature changes
by

1 Answer

Answer :

(2) decreases with increase in temperature Explanation: According to Wien's displacement law, when the temperature of a blackbody radiator increases, the overall radiated energy increases. Wavelength of maximum emission from a blackbody is inversely proportional to its temperature. Shorter-wavelength (higher-frequency) light corresponds to higherenergy photons.
by
selected

Related questions

The wavelength at which the peak of intensity of blackbody radiation occurs (1) increases with increase in temperature (2) decreases with increase in temperature (3) is the same at all temperatures (4) does not follow any pattern as temperature changes

Description : The wavelength at which the peak of intensity of blackbody radiation occurs (1) increases with increase in temperature (2) decreases with increase in temperature (3) is the same at all temperatures (4) does not follow any pattern as temperature changes

Last Answer : decreases with increase in temperature

The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Description : The absorptivity of a grey body at a given temperature __________ with increasing wavelength of radiation. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material

Last Answer : (D) May increase or decrease; depends on the material

To develop the correct mathematical description of the distribution of radiated energy of a blackbody with respect to wavelength for a given temperature, Planck found it necessary to assume that the molecular oscillators of the blackbody emitted and absorbed: w) no radiant energy x) radiant energy in discrete units or quanta y) radiant energy in a continuous form z) none of the above.

Description : To develop the correct mathematical description of the distribution of radiated energy of a blackbody with respect to wavelength for a given temperature, Planck found it necessary to assume that the molecular ... units or quanta y) radiant energy in a continuous form z) none of the above.

Last Answer : ANSWER: X -- RADIANT ENERGY IN DISCRETE UNITS OR QUANTA

Pycnometer is an instrument used to measure the – (1) Density (2) Intensity of solar radiation (3) Intensity of earthquake (4) High temperatures

Description : Pycnometer is an instrument used to measure the – (1) Density (2) Intensity of solar radiation (3) Intensity of earthquake (4) High temperatures

Last Answer : (1) Density Explanation: A gas pycnometer is a laboratory device used for measuring the density - or more accurately the volume - of solids, be they regularly shaped, porous or non-porous, ... , employing some method of has displacement and the volume-pressure relationship known as Boyle's Law.

Pycnometer is an instrument used to measure the (1) density (2) intensity of solar radiation (3) intensity of earthquake (4) high temperatures

Description : Pycnometer is an instrument used to measure the (1) density (2) intensity of solar radiation (3) intensity of earthquake (4) high temperatures

Last Answer : density

The radiation emitted by a body as a result of its temperature.  a. Blackbody Radiation  b. Thermal Inversion  c. Thermionic Inversion  d. Thermal Radiation

Description : The radiation emitted by a body as a result of its temperature.  a. Blackbody Radiation  b. Thermal Inversion  c. Thermionic Inversion  d. Thermal Radiation

Last Answer : Thermal Radiation

The thermal radiation emitted by a blackbody heated to a given temperature.  a. Gamma Radiation  b. Black Body Radiation  c. Electromagnetic Radiation  d. Alpha Radiation

Description : The thermal radiation emitted by a blackbody heated to a given temperature.  a. Gamma Radiation  b. Black Body Radiation  c. Electromagnetic Radiation  d. Alpha Radiation

Last Answer : Black Body Radiation

How the intensity of secondary maxima varies in case of Fraunhofer diffraction pattern for single slit? A. Intensity of secondary maxima decreases on either sides B. Intensity of secondary maxima remains constant on either side C. Intensity increases and decreases alternately D. Intensity of secondary maxima increases on either sides

Description : How the intensity of secondary maxima varies in case of Fraunhofer diffraction pattern for single slit? A. Intensity of secondary maxima decreases on either sides B. Intensity of ... C. Intensity increases and decreases alternately D. Intensity of secondary maxima increases on either sides

Last Answer : A. Intensity of secondary maxima decreases on either sides

In the periodic table of elements, on moving from left to right across a period, the atomic radius – (1) decreases (2) increases (3) remains unchanged (4) does not follow a definite pattern

Description : In the periodic table of elements, on moving from left to right across a period, the atomic radius – (1) decreases (2) increases (3) remains unchanged (4) does not follow a definite pattern

Last Answer : (1) decreases Explanation: The atomic radius is the distance from the atomic nucleus to the outermost stable electron orbital in an atom that is at equilibrium. It tends to decrease across a period from ... usually increases while going down a group due to the addition of a new energy level (shell).

In the periodic table of elements, on moving from left to right across a period, the atomic radius (1) decreases (2) increases (3) remains unchanged (4) does not follow a definite pattern

Description : In the periodic table of elements, on moving from left to right across a period, the atomic radius (1) decreases (2) increases (3) remains unchanged (4) does not follow a definite pattern

Last Answer : increases

As the temperature of the air increases from 0 degrees C to 20 degrees C, the wavelength of a sound made by a tuning fork of fixed frequency does which of the following? Does the wavelength w) increase x) decrease y) remain the same z) increase up to a maximum, then remain constant

Description : As the temperature of the air increases from 0 degrees C to 20 degrees C, the wavelength of a sound made by a tuning fork of fixed frequency does which of the following? Does the wavelength w) increase x) decrease y) remain the same z) increase up to a maximum, then remain constant

Last Answer : ANSWER: W -- INCREASE

As a source of sound approaches a stationary listener, the apparent wavelength: w) increases x) decreases y) stays the same.

Description : As a source of sound approaches a stationary listener, the apparent wavelength: w) increases x) decreases y) stays the same. 

Last Answer : ANSWER: X -- DECREASES

An idealized perfect absorber and perfect emitter of radiation.  a. elastic material  b. transponder material  c. Teflon  d. blackbody

Description : An idealized perfect absorber and perfect emitter of radiation.  a. elastic material  b. transponder material  c. Teflon  d. blackbody

Last Answer : blackbody

lobes between end of the love at which the relative power is one half (-3dB) its value from the peak of the lobe. A. Bandwidth B. Wavelength C. Radiation D. Beamwidth

Description : Width measured in degrees of a major lobes between end of the love at which the relative power is one half (-3dB) its value from the peak of the lobe. A. Bandwidth B. Wavelength C. Radiation D. Beamwidth

Last Answer : D. Beamwidth

With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________, if the conduction and radiation through the solid are negligible. (A) Increases (B) Decreases (C) Remain same

Description : With increase in the mass velocity of the gas, the rate of drying during the constant rate period __________, if the conduction and radiation through the solid are negligible. (A) Increases (B) Decreases (C) Remain same

Last Answer : (A) Increases

In the Tyndall Effect, the intensity of scattered radiation is inversely proportional to the fourth power of the wavelength. Which one of the following colors of light would exhibit the most intense Tyndall scattering? w) yellow x) green y) orange z) violet

Description : In the Tyndall Effect, the intensity of scattered radiation is inversely proportional to the fourth power of the wavelength. Which one of the following colors of light would exhibit the most intense Tyndall scattering? w) yellow x) green y) orange z) violet 

Last Answer : ANSWER: Z -- VIOLET 

A half wavelength Dipole antenna has _________ Radiation Pattern

Description : A half wavelength Dipole antenna has _________ Radiation Pattern  a. Hemispherical b. Omni-Directional c. Isotropic d. End fire

Last Answer : A half wavelength Dipole antenna has Omni-Directional Radiation Pattern 

At lower temperatures and pressures, the latent heat of vaporization of a refrigerant (a) decreases (b) increases (c) remains same (d) depends on other factors

Description : At lower temperatures and pressures, the latent heat of vaporization of a refrigerant (a) decreases (b) increases (c) remains same (d) depends on other factors

Last Answer : Ans: b

The intensity of pressure on an immersed surface __________ with the increase in depth. (A) Does not change (B) Increases (C) Decreases (D) None of these

Description : The intensity of pressure on an immersed surface __________ with the increase in depth. (A) Does not change (B) Increases (C) Decreases (D) None of these

Last Answer : Answer: Option B

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

Which of the following property of sound is affected by change in air temperature – (1) Frequency (2) Intensity (3) Amplitude (4) Wavelength

Description : Which of the following property of sound is affected by change in air temperature – (1) Frequency (2) Intensity (3) Amplitude (4) Wavelength

Last Answer : (4) Wavelength Explanation: The wavelength of sound changes with temperature. This is because the speed of sound changes with the temperature. Since the speed of sound is different at different temperature, this ... while the same tone in fresh water at 68°F would have a wavelength of 48.05 feet.

Which of the following property of sound is affected by change in air temperature (1) Frequency (2) Intensity (3) Amplitude (4) Wavelength

Description : Which of the following property of sound is affected by change in air temperature (1) Frequency (2) Intensity (3) Amplitude (4) Wavelength

Last Answer : Wavelength

Consider the diurnal (daily) cycle of temperature at the surface. Why is the tem- perature maximum in the mid-to-late afternoon? (a) There is a net energy gain at the surface from dawn to mid- afternoon. (b) Clouds form in mid-to-late afternoon, cutting down the solar heating and cooling the surface. (c) The intensity of solar radiation is at a maximum at this time. (d) Late in the day, evaporation from the surface increases and this cools the surface.

Description : Consider the diurnal (daily) cycle of temperature at the surface. Why is the tem- perature maximum in the mid-to-late afternoon? (a) There is a net energy gain at the surface from dawn to mid- ... this time. (d) Late in the day, evaporation from the surface increases and this cools the surface.

Last Answer : There is a net energy gain at the surface from dawn to mid- afternoon.

In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as the amplitudeof the information signal changes, thefrequency of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Last Answer : FM

With increase in the distance between the heat source and the object receiving the heat, the radiation heat transfer (A) Decreases (B) Increases (C) Increases exponentially (D) Remain unaffected

Description : With increase in the distance between the heat source and the object receiving the heat, the radiation heat transfer (A) Decreases (B) Increases (C) Increases exponentially (D) Remain unaffected

Last Answer : (A) Decreases

Radiant energy emitted from a blackbody is only a function of what?

Description : Radiant energy emitted from a blackbody is only a function of what?

Last Answer : ANSWER: TEMPERATURE

A hollow sphere and a solid sphere of the same material and equal radii are heated to the same temperature. In this case, (A) The cooling rate will be the same for the two spheres and hence the two spheres will have equal temperatures at any instant (B) Both the spheres will emit equal amount of radiation per unit time in the beginning (C) Both will absorb equal amount of radiation from the surrounding in the beginning (D) Both (B) & (C)

Description : A hollow sphere and a solid sphere of the same material and equal radii are heated to the same temperature. In this case, (A) The cooling rate will be the same for the two spheres and hence the ... equal amount of radiation from the surrounding in the beginning (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

As a tsunami approaches shallow water which of the following set of transformations occur? a) Wavelength increases, wave period decreases, and wave height stays the same b) Wavelength decreases, wave period decreases, and wave height increases c) Wavelength decreases, wave period increases, and wave height increases d) Wavelength decreases, waver period stays the same, and wave height increases

Description : As a tsunami approaches shallow water which of the following set of transformations occur? a) Wavelength increases, wave period decreases, and wave height stays the same b) Wavelength decreases, ... wave height increases d) Wavelength decreases, waver period stays the same, and wave height increases

Last Answer : d) Wavelength decreases, waver period stays the same, and wave height increases

When light passes from air into water, the frequency of the light remains the same. What happens to the speed? And the wavelength of light as it crosses the boundary in going from air into water? Speed Wavelength A. Increases Remains the same B. Remains the same Decreases C. Remains the same remains the same D. Decreases Increases E. Decreases Decreases

Description : When light passes from air into water, the frequency of the light remains the same. What happens to the speed? And the wavelength of light as it crosses the boundary in going from air into ... same Decreases C. Remains the same remains the same D. Decreases Increases E. Decreases Decreases

Last Answer : E. Decreases Decreases

The velocity of sound in air – (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Description : The velocity of sound in air – (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Last Answer : (4) decreases with decrease of temperature Explanation: Assuming air to be an ideal gas, the speed of sound c depends on temperature only, not on the pressure or density. As air ... to the individual air particles having extra kinetic energy at higher temperatures and lesser at lower temperatures.

The velocity of sound in air (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Description : The velocity of sound in air (1) decreases with increase of temperature (2) increases with decrease of temperature (3) does not depend on temperature (4) decreases with decrease of temperature

Last Answer :  decreases with decrease of temperature

After the celebration of the successful milestone completion, a project manager will often do which of the following? Select one: a. Continue to increase the intensity of the project to achieve the next milestone. b. Continue to follow the exact same project plan that helped the team achieve the milestone. c. Allow the team to reflect on finding new ways of approaching the project work. d. Select an upcoming key event and designate it as the next milestone. e. Stretch the goals of the project team, making them more tough and rigorous.

Description : After the celebration of the successful milestone completion, a project manager  will often do which of the following? Select one: a. Continue to increase the intensity of the project to achieve the ... milestone. e. Stretch the goals of the project team, making them more tough and rigorous.

Last Answer : c. Allow the team to reflect on finding new ways of approaching the project work.

With the increase of pressure, the boiling point of any substance - (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Description : With the increase of pressure, the boiling point of any substance - (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Last Answer : (1) Increases Explanation: The temperature stays the same until all the liquid has vaporized. As the temperature of a liquid rises, the pressure of escaping vapor also rises, and at the boiling point ... vapor is equal to that exerted on the liquid by the surrounding air, causing bubbles to form.

If cream is removed from milk, its density – (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Description : If cream is removed from milk, its density – (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Last Answer : (1) Increases Explanation: The density of pure fresh milk being on the average 1.032, while the density of fat globules is about 0.86. It follows that the removal of cream will increase the density, while the addition of water will decrease it.

With the increase of pressure, the boiling point of any substance – (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Description : With the increase of pressure, the boiling point of any substance – (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Last Answer : (1) Increases Explanation: The temperature stays the same until all the liquid has vaporized. As the temperature of a liquid rises, the pressure of escaping vapor also rises, and at the boiling point ... vapor is equal to that exerted on the liquid by the surrounding air, causing bubbles to form.

If cream is removed from milk, its density (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Description : If cream is removed from milk, its density (1) Increases (2) Decreases (3) Remains the same (4) May increase or decrease

Last Answer : Increases

Hertz is a unit for measuring – (1) Intensity of waves (2) Frequency of waves (3) Wavelength (4) Clarity of waves

Description : Hertz is a unit for measuring – (1) Intensity of waves (2) Frequency of waves (3) Wavelength (4) Clarity of waves

Last Answer : (2) Frequency of waves

Red light is used for signals because it has – (1) long wavelength (2) high intensity (3) high frequency (4) low refraction in the medium

Description : Red light is used for signals because it has – (1) long wavelength (2) high intensity (3) high frequency (4) low refraction in the medium

Last Answer : (1) long wavelength Explanation: Red is the international colour of stop signs and stop lights on highways and intersections because it is scattered the least by air molecules. The effect of scattering is ... the colours and is able to travel the longest distance through fog, rain, and the alike.

Hertz is a unit for measuring (1) Intensity of waves (2) Frequency of waves (3) Wavelength (4) Clarity of waves

Description : Hertz is a unit for measuring (1) Intensity of waves (2) Frequency of waves (3) Wavelength (4) Clarity of waves

Last Answer : Frequency of waves

Red light is used for signals because it has (1) long wavelength (2) high intensity (3) high frequency (4) low refraction in the medium

Description : Red light is used for signals because it has (1) long wavelength (2) high intensity (3) high frequency (4) low refraction in the medium

Last Answer : long wavelength

Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Description : Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Last Answer : (C) Radiation becomes important

Stacking elements in a transmitting antenna system A. increases the field strength at the receiving antenna B. increases the directivity of the transmitter antenna C. decrease the size of the lobe in the radiation pattern D. both A and B

Description : Stacking elements in a transmitting antenna system A. increases the field strength at the receiving antenna B. increases the directivity of the transmitter antenna C. decrease the size of the lobe in the radiation pattern D. both A and B

Last Answer : D. both A and B

What is the effect of increasing the number of slits on the intensity of Central maxima of diffraction pattern of a diffraction grating? A. Intensity of central maxima will decrease B. Intensity of central maxima will increase C. There will not be any effect D. Diffraction pattern will disappear

Description : What is the effect of increasing the number of slits on the intensity of Central maxima of diffraction pattern of a diffraction grating? A. Intensity of central maxima will decrease B. Intensity ... maxima will increase C. There will not be any effect D. Diffraction pattern will disappear

Last Answer : B. Intensity of central maxima will increase

If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 (as per Le Chatelier's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Description : If helium is introduced in a reactor containing O2 , SO2 and SO3 at equilibrium, so that total pressure increases while volume and temperature remains constant. In this case the dissociation of SO3 ( ... 's principle). (A) Decreases (B) Increases (C) Remains unaltered (D) Changes unpredictably

Last Answer : (A) Decreases

When gas changes to liquid through the process of condensation, the temperature A] Increases. B] Decreases C] Remains constant. D] None of the mentioned

Description : When gas changes to liquid through the process of condensation, the temperature A] Increases. B] Decreases C] Remains constant. D] None of the mentioned

Last Answer : C] Remains constant.

The calibration of an HPLC detector can be evaluated by measurement of? A. Retention time B. Temperature C. Flow rate accuracy D. Intensity of the peak

Description : The calibration of an HPLC detector can be evaluated by measurement of? A. Retention time B. Temperature C. Flow rate accuracy D. Intensity of the peak

Last Answer : D. Intensity of the peak

When the wavelength of incident X-rays increases, the angle of diffraction (A) Decreases (B) Increases (C) Remain constant (D) Shows no systematic variation

Description : When the wavelength of incident X-rays increases, the angle of diffraction (A) Decreases (B) Increases (C) Remain constant (D) Shows no systematic variation

Last Answer : Option A

A source produces sound waves under water. Waves travel through water and then into air. Which of the following statements about the frequency (f) and the wavelength () is correct and sound passes from water to air? (1) f remains unchanged but  decreases. (2) f remains unchanged but  increases. (3)  remains unchanged but f decreases. (4)  remains unchanged but f increases.

Description : A source produces sound waves under water. Waves travel through water and then into air. Which of the following statements about the frequency (f) and the wavelength () is correct and sound passes from ... increases. (3)  remains unchanged but f decreases. (4)  remains unchanged but f increases.

Last Answer : 3)  remains unchanged but f decreases.

In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Description : In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Last Answer : ANSWER : C

As the reliability increases, failure intensity (A) decreases (B) increases (C) no effect (D) none of the above

Description : As the reliability increases, failure intensity (A) decreases (B) increases (C) no effect (D) none of the above

Last Answer : (A) decreases