The catalyst used in hydrogenation of oils is - (1) Fe (2) V2O5 (3) Ni (4) O2

The catalyst used in hydrogenation of oils is - (1) Fe (2) V2O5 (3) Ni (4) O2
by

1 Answer

Answer :

(3) Ni Explanation: The catalyst used in hydrogenation of oils is nickel. It is used to speed up the reaction. Vegetable oils convert into vanaspati after hydrogenation.
by
selected

Related questions

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

The metal that is used as a catalyst in the hydrogenation of oils is - (1) Pb (2) Ni (3) Cu (4) Pt

Description : The metal that is used as a catalyst in the hydrogenation of oils is - (1) Pb (2) Ni (3) Cu (4) Pt

Last Answer : (2) Ni Explanation: The catalyst used in hydrogenation of oils is nickel. It is used to speed up the reaction.

Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Description : Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Last Answer : Vanaspati ghee

The metal that is used as a catalyst in the hydrogenation of oils is (a) Ni (b) Pb (c) Cu (d) Pt

Description : The metal that is used as a catalyst in the hydrogenation of oils is (a) Ni (b) Pb (c) Cu (d) Pt

Last Answer : Ans:(a)

__________ is used as a catalyst in fat splitting. (A) ZnO (B) Ni (C) V2O5 (D) FeO

Description : __________ is used as a catalyst in fat splitting. (A) ZnO (B) Ni (C) V2O5 (D) FeO

Last Answer : (A) ZnO

Catalyst used in the oxidation of benzene to produce Maleic anhydride is (A) V2O5 (B) Pt (C) Ni (D) Cr

Description : Catalyst used in the oxidation of benzene to produce Maleic anhydride is (A) V2O5 (B) Pt (C) Ni (D) Cr

Last Answer : (A) V2O5

Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Last Answer : (C) V2O5

In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by (A) Increasing the oxygen concentration (B) Putting more quantity of V2O5 catalyst in the converter (C) Removing some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

Which of the following statements are false about benzene? (a) It is a planar molecule with bond angles 120°(b) It is immiscible with water forming the lower layer. (c) It can be converted into cyclohexane by hydrogenation at 200°C in the presence of Ni catalyst. (d) It reacts with ethyl chloride in the presence of aluminium chloride to form ethylbenzene..

Description : Which of the following statements are false about benzene? (a) It is a planar molecule with bond angles 120°. (b) It is immiscible with water forming the lower layer. (c) It can be ... Ni catalyst. (d) It reacts with ethyl chloride in the presence of aluminium chloride to form ethylbenzene.

Last Answer : It is immiscible with water forming the lower layer

Which one of the following is not a metal catalyst for the hydrogenation of an alkene? (a) Pd (b) Pt (c) Na(d) Ni

Description : Which one of the following is not a metal catalyst for the hydrogenation of an alkene? (a) Pd (b) Pt (c) Na (d) Ni

Last Answer : Na

Vegetable oils are converted into solid fat (ghee) by - (1) Hydrolysis (2) Addition of agar (3) Oxidation using air and a catalyst (4) Hydrogenation

Description : Vegetable oils are converted into solid fat (ghee) by - (1) Hydrolysis (2) Addition of agar (3) Oxidation using air and a catalyst (4) Hydrogenation

Last Answer : (4) Hydrogenation Explanation: Hydrogenation - to treat with hydrogen - is a chemical reaction between molecular hydrogen (H2) and another compound or element, usually in the presence of a ... oils are derived from polyunsaturated fatty acids (containing more than one carbon-carbon double bonds).

The metal that is used as a catalyst in the hydrogenation of oils is?

Description : The metal that is used as a catalyst in the hydrogenation of oils is?

Last Answer : Ni

Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons(D) None of these

Description : Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons (D) None of these

Last Answer : (C) Alkylation of hydrocarbons

Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Description : Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For the hydrogenation of oils, __________ (i) __________ is commonly used as catalyst and __________ (ii) __________ is a catalyst poison. (A) (i) platinum (ii) sulphur (B) (i) palladium (ii) oxygen (C) (i) nickel (ii) sulphur (D) (i) nickel (ii) oxygen

Description : For the hydrogenation of oils, __________ (i) __________ is commonly used as catalyst and __________ (ii) __________ is a catalyst poison. (A) (i) platinum (ii) sulphur (B) (i) palladium (ii) oxygen (C) (i) nickel (ii) sulphur (D) (i) nickel (ii) oxygen

Last Answer : (C) (i) nickel (ii) sulphur

Vegetable oils are converted into solid fat (ghee) by (1) Hydrolysis (2) Addition of agar (3) Oxidation using air and a catalyst (4) Hydrogenation

Description : Vegetable oils are converted into solid fat (ghee) by (1) Hydrolysis (2) Addition of agar (3) Oxidation using air and a catalyst (4) Hydrogenation 

Last Answer : Hydrogenation

Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Description : Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Last Answer : Anthraquinone

Why does V2O5 acts as catalyst ?

Description : Why does V2O5 acts as catalyst ?

Last Answer : Ans : It is because V shows variable O.S . 

Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Description : Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Last Answer : (C) V2O5

Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Description : Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Last Answer : (D) Oxides of nitrogen & V2O5 on a porous carrier

Liquid oils can be converted to solid fats by (a) Hydrogenation (b) Saponification (c) Hydrolysis (d) Oxidation of double bonds

Description : Liquid oils can be converted to solid fats by (a) Hydrogenation (b) Saponification (c) Hydrolysis (d) Oxidation of double bonds

Last Answer : Hydrogenation

2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Description : 2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Last Answer : 2-Butene

What is meant by hydrogenation of oils?

Description : What is meant by hydrogenation of oils?

Last Answer : The process of converting liquid oils into solids saturated fats by passing hydrogen gas through them is called hydrogenation of oils. Finely divided nickel is used as catalyst during the process. Ex: Vanaspathi

Hydrogenation of vegetable oils is a/an __________ reaction. (A) Endothermic (B) Autocatalytic (C) Exothermic (D) Homogenous

Description : Hydrogenation of vegetable oils is a/an __________ reaction. (A) Endothermic (B) Autocatalytic (C) Exothermic (D) Homogenous

Last Answer : (C) Exothermic

Oils and fats are converted to soap in a process called (A) Hydrogenation (B) Esterification (C) Saponification (D) None of these

Description : Oils and fats are converted to soap in a process called (A) Hydrogenation (B) Esterification (C) Saponification (D) None of these

Last Answer : (C) Saponification

Pick out the correct statement. (A) A fat is converted into oil by its hydrogenation (B) There is no difference between a fat and an oil so far as its physical properties are concerned (C) All vegetable oils except coconut oil, contains fatty acids having more than sixteen carbon atoms (D) Vegetable oils are classified as drying, non-drying and semi drying oils depending upon their fatty acids content

Description : Pick out the correct statement. (A) A fat is converted into oil by its hydrogenation (B) There is no difference between a fat and an oil so far as its physical properties are ... Vegetable oils are classified as drying, non-drying and semi drying oils depending upon their fatty acids content

Last Answer : (C) All vegetable oils except coconut oil, contains fatty acids having more than sixteen carbon atoms

A 'unit process' is exemplified by the (A) Distillation (B) Hydrogenation of oils (C) Absorption (D) Humidification

Description : A 'unit process' is exemplified by the (A) Distillation (B) Hydrogenation of oils (C) Absorption (D) Humidification

Last Answer : (B) Hydrogenation of oils

Commercial production of Vanaspati is done by __________ of edible vegetable oils. (A) Hydrogenation (B) Oxidation (C) Hydrolysis (D) Hydrocracking

Description : Commercial production of Vanaspati is done by __________ of edible vegetable oils. (A) Hydrogenation (B) Oxidation (C) Hydrolysis (D) Hydrocracking

Last Answer : (A) Hydrogenation

Which gas is used for converting vegetable oils into saturated fats? (1) H2 (2) O2 (3) Cl2 (4) SO2

Description : Which gas is used for converting vegetable oils into saturated fats? (1) H2 (2) O2 (3) Cl2 (4) SO2

Last Answer : (1) H2 Explanation: Hydrogenation - to treat with hydrogen - is a chemical reaction between molecular hydrogen (H2) and another compound or element, usually in the presence of a catalyst. ... oils are derived from polyunsaturated fatty acids (containing more than one carbon-carbon double bonds).

Which gas is used for converting vegetable oils into saturated fats ? (1) H2 (2) O2 (3) Cl2 (4) SO2

Description : Which gas is used for converting vegetable oils into saturated fats ? (1) H2 (2) O2 (3) Cl2 (4) SO2

Last Answer : H2

Newlands' table, the elements were placed with the halogens - (1) Mn and As (2) Fe and Se (3) Ce and La (4) Co and Ni

Description : Newlands' table, the elements were placed with the halogens - (1) Mn and As (2) Fe and Se (3) Ce and La (4) Co and Ni

Last Answer : (4) Co and Ni Explanation: Newlands' Law of Octaves suffered from lot of limitations, In order to fit elements into his table, Newlands ad justed two elements in the same slot, but also put some unlike elements under the same note.

A complex compound in which the oxidation number of a metal is zero is - (1) K4 [Fe (CN)6] (2) K3 [Fe (CN)6] (3) [Ni (CO)4] (4) [Pl (NH3)4]Cl2

Description : A complex compound in which the oxidation number of a metal is zero is - (1) K4 [Fe (CN)6] (2) K3 [Fe (CN)6] (3) [Ni (CO)4] (4) [Pl (NH3)4]Cl2

Last Answer : (3) [Ni (CO)4]

Which of the following metals is used in Space Crafts to withstand high temperatures? (1) Fe (2) Ti (3) Ni (4) Pb

Description : Which of the following metals is used in Space Crafts to withstand high temperatures? (1) Fe (2) Ti (3) Ni (4) Pb

Last Answer : (2) Ti Explanation: Titanium alloy, which has high corrosion resistance, high specific strength, and good heat resistance, is used for different spacecraft parts including outer fuel tank sheathing and wings. It is extremely strong at high temperatures.

Which of the following metals is used in Space Crafts to withstand high temperatures ? (1) Fe (2) Ti (3) Ni (4) Pb

Description : Which of the following metals is used in Space Crafts to withstand high temperatures ? (1) Fe (2) Ti (3) Ni (4) Pb

Last Answer : Ti

Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina

Description : Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina

Last Answer : (A) Nickel

Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Last Answer : (A) Shift conversion

Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture

Description : Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture

Last Answer : (D) Ostwald's process of HNO3 manufacture

Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil(B) Sintering of porous catalyst(C) Hydrogen embrittlement(D) All (A), (B) and (C)

Description : Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil (B) Sintering of porous catalyst (C) Hydrogen embrittlement (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Zeolite is used in the (A) Water treatment (B) Glass manufacture (C) Hydrogenation of fatty oil as a catalyst (D) Development of exposed photographic plate

Description : Zeolite is used in the (A) Water treatment (B) Glass manufacture (C) Hydrogenation of fatty oil as a catalyst (D) Development of exposed photographic plate

Last Answer : (A) Water treatment

A mixture of chlorine & sodium bromide acts as a/an (A) Insecticides (B) Analgesic drug (C) Fire retardant (D) Hydrogenation catalyst

Description : A mixture of chlorine & sodium bromide acts as a/an (A) Insecticides (B) Analgesic drug (C) Fire retardant (D) Hydrogenation catalyst

Last Answer : (C) Fire retardant

Naphthalene undergoes reduction with H2 in the presence of Ni catalyst at high temperature and pressure to give (a) Phthalic acid (b) Decalin (c) Benzoic acid (d) Tetralin

Description : Naphthalene undergoes reduction with H2 in the presence of Ni catalyst at high temperature and pressure to give (a) Phthalic acid (b) Decalin (c) Benzoic acid (d) Tetralin

Last Answer : Decalin

Benzene reacts with H2 at 150°C at 30 atm in the presence of Ni catalyst to give (a) Cyclohexane (b) Cyclohexene (c) n-Hexane (d) No reaction occurs

Description : Benzene reacts with H2 at 150°C at 30 atm in the presence of Ni catalyst to give (a) Cyclohexane (b) Cyclohexene (c) n-Hexane (d) No reaction occurs

Last Answer : Cyclohexane

Which of the following agents is used in order to make benzene react with bromine to give bromobenzene? (a) Ultraviolet light (b) Fe catalyst (c) Nickel catalyst (d) Al2O3 catalyst

Description : Which of the following agents is used in order to make benzene react with bromine to give bromobenzene? (a) Ultraviolet light (b) Fe catalyst (c) Nickel catalyst (d) Al2O3 catalyst

Last Answer : Fe catalyst

Which of the following has highest melting point? Ni, Fe, Pt, W. -Chemistry 9th

Description : Which of the following has highest melting point? Ni, Fe, Pt, W. -Chemistry 9th

Last Answer : i think all are equal

Which one of the following has a square planar geometry? `(Co=27, Ni=28, Fe=26, Pt=78)`

Description : Which one of the following has a square planar geometry? `(Co=27, Ni=28, Fe=26, Pt=78)`

Last Answer : Which one of the following has a square planar geometry? `(Co=27, Ni=28, Fe=26, Pt=78)` A. `[NiCl_(4)]^(2-) ... `[CoCl_(4)]^(2-)` D. `[FeCl_(4)]^(2-)`

The correct statement (s) regarding the binary transition metal carbonyl compounds is (are) (Atomic numbers: Fe = 26, Ni = 28)

Description : The correct statement (s) regarding the binary transition metal carbonyl compounds is (are) (Atomic numbers: Fe = 26, Ni = 28)

Last Answer : The correct statement (s) regarding the binary transition metal carbonyl compounds is (are) (Atomic ... the oxidation state of the metal is increased

Among the following complexes : `K_(3)[Fe(CN)_(6)],[Co(NH_(3))_(6)]Cl_(3)` , `Na_(3)[Co ( o x )_(3)],[Ni(H_(2)O)_(6)]Cl_(2)`, `K_(2)[Pt(CN)_(4)]` and

Description : Among the following complexes : `K_(3)[Fe(CN)_(6)],[Co(NH_(3))_(6)]Cl_(3)` , `Na_(3)[Co ( o x )_(3)],[Ni(H_(2)O)_(6)]Cl_(2)`, `K_(2)[Pt(CN)_(4)]` and

Last Answer : Among the following complexes : `K_(3)[Fe(CN)_(6)],[Co(NH_(3))_(6)]Cl_(3)` , `Na_(3)[Co ( o x )_(3)],[Ni(H_( ... ,M,N B. K,N,O,P C. L,M,O,P D. L,M,N,O

Constantan is an alloy of (A) Cu (55%) & Sn (45%) (B) Cu (55%) & Ni (45%) (C) Pt (95%) & Rh (10%) (D) Fe (80%) & Ni (20%)

Description : Constantan is an alloy of (A) Cu (55%) & Sn (45%) (B) Cu (55%) & Ni (45%) (C) Pt (95%) & Rh (10%) (D) Fe (80%) & Ni (20%)

Last Answer : (B) Cu (55%) & Ni (45%)

The core metal of chlorophyll is (a) Ni (b) Cu (c) Fe (d) Mg.

Description : The core metal of chlorophyll is (a) Ni (b) Cu (c) Fe (d) Mg.

Last Answer : d) Mg.

The deficiencies of micronutrients, not only affect growth of plants but also vital functions such as photosynthetic and mitochondrial electron flow. Among the list given below, which group of three elements shall affect most, both photosynthetic and mitochondrial electron transport?(a) Co, Ni, Mo (b) Ca, K, Na (c) Mn, Co, Ca (d) Cu, Mn, Fe

Description : The deficiencies of micronutrients, not only affect growth of plants but also vital functions such as photosynthetic and mitochondrial electron flow. Among the list given below, which group of three elements shall affect most, both ... , Mo (b) Ca, K, Na (c) Mn, Co, Ca (d) Cu, Mn, Fe

Last Answer : d) Cu, Mn, Fe