For the hydrogenation of oils, __________ (i) __________ is commonly used as catalyst and __________ (ii) __________ is a catalyst poison. (A) (i) platinum (ii) sulphur (B) (i) palladium (ii) oxygen (C) (i) nickel (ii) sulphur (D) (i) nickel (ii) oxygen

For the hydrogenation of oils, __________ (i) __________ is commonly
used as catalyst and __________ (ii) __________ is a catalyst poison.
(A) (i) platinum (ii) sulphur
(B) (i) palladium (ii) oxygen
(C) (i) nickel (ii) sulphur
(D) (i) nickel (ii) oxygen
by

1 Answer

Answer :

(C) (i) nickel (ii) sulphur
by

Related questions

Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina

Description : Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina

Last Answer : (A) Nickel

Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Description : Hydrogenation of edible vegetable oils (A) Is an exothermic reaction (B) Increases their melting point (C) Is done in presence of nickel catalyst (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel(C) Platinum(D) Nickel

Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel

Last Answer : (A) Alumina

Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Last Answer : (A) Shift conversion

Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons(D) None of these

Description : Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons (D) None of these

Last Answer : (C) Alkylation of hydrocarbons

The metal that is used as a catalyst in the hydrogenation of oils is (a) Ni (b) Pb (c) Cu (d) Pt

Description : The metal that is used as a catalyst in the hydrogenation of oils is (a) Ni (b) Pb (c) Cu (d) Pt

Last Answer : Ans:(a)

Vegetable oils are converted into solid fat (ghee) by - (1) Hydrolysis (2) Addition of agar (3) Oxidation using air and a catalyst (4) Hydrogenation

Description : Vegetable oils are converted into solid fat (ghee) by - (1) Hydrolysis (2) Addition of agar (3) Oxidation using air and a catalyst (4) Hydrogenation

Last Answer : (4) Hydrogenation Explanation: Hydrogenation - to treat with hydrogen - is a chemical reaction between molecular hydrogen (H2) and another compound or element, usually in the presence of a ... oils are derived from polyunsaturated fatty acids (containing more than one carbon-carbon double bonds).

The metal that is used as a catalyst in the hydrogenation of oils is - (1) Pb (2) Ni (3) Cu (4) Pt

Description : The metal that is used as a catalyst in the hydrogenation of oils is - (1) Pb (2) Ni (3) Cu (4) Pt

Last Answer : (2) Ni Explanation: The catalyst used in hydrogenation of oils is nickel. It is used to speed up the reaction.

The catalyst used in hydrogenation of oils is - (1) Fe (2) V2O5 (3) Ni (4) O2

Description : The catalyst used in hydrogenation of oils is - (1) Fe (2) V2O5 (3) Ni (4) O2

Last Answer : (3) Ni Explanation: The catalyst used in hydrogenation of oils is nickel. It is used to speed up the reaction. Vegetable oils convert into vanaspati after hydrogenation.

The metal that is used as a catalyst in the hydrogenation of oils is?

Description : The metal that is used as a catalyst in the hydrogenation of oils is?

Last Answer : Ni

Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Description : Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Last Answer : Vanaspati ghee

Vegetable oils are converted into solid fat (ghee) by (1) Hydrolysis (2) Addition of agar (3) Oxidation using air and a catalyst (4) Hydrogenation

Description : Vegetable oils are converted into solid fat (ghee) by (1) Hydrolysis (2) Addition of agar (3) Oxidation using air and a catalyst (4) Hydrogenation 

Last Answer : Hydrogenation

Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture

Description : Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture

Last Answer : (D) Ostwald's process of HNO3 manufacture

Catalyst used in the production of high density polythene by low pressure Ziegler process is(A) Aluminium triethyl activated with TiCl4(B) Platinum(C) Molybdenum(D) Nickel

Description : Catalyst used in the production of high density polythene by low pressure Ziegler process is (A) Aluminium triethyl activated with TiCl4 (B) Platinum (C) Molybdenum (D) Nickel

Last Answer : (A) Aluminium triethyl activated with TiCl4

Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Last Answer : (A) Platinum on alumina

Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium

Last Answer : (A) Nickel

Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper

Description : Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper

Last Answer : (B) Nickel

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum

Platinum is a versatile catalyst for many processes in chemical industries. It is highly prone to be poisoned by the presence of (A) Carbon (B) Arsenic (C) Lead (D) Sulphur

Description : Platinum is a versatile catalyst for many processes in chemical industries. It is highly prone to be poisoned by the presence of (A) Carbon (B) Arsenic (C) Lead (D) Sulphur

Last Answer : (B) Arsenic

Can one make a profit from extracting palladium and platinum from automobiles in junk yards?

Description : Can one make a profit from extracting palladium and platinum from automobiles in junk yards?

Last Answer : It’s the recyclers who do that and make money. You couldn’t make enough trying to do it yourself.

Why are substances like Platinum and Palladium offer used for carrying out electrolysis in aqueous solution ?

Description : Why are substances like Platinum and Palladium offer used for carrying out electrolysis in aqueous solution ?

Last Answer : Platinum and palladium is inert electrodes. They are not react with the ions of electrolyte and products of electrolysis. Hence they are used as electrodes during electrolysis. Hence they ... electrodes during electrolysis. Hence they are used as electrodes during electrolysis in aqueous solution. 

Oils are partially hydrogenated (not fully) to manufacture Vanaspati, because fully saturated solidified oils (A) Cause cholesterol build up and blood clotting (B) Are prone to rancid oxidation (C) Always contain some amount of nickel (as their complete removal is very difficult) (D) Have affinity to retain harmful sulphur compounds

Description : Oils are partially hydrogenated (not fully) to manufacture Vanaspati, because fully saturated solidified oils (A) Cause cholesterol build up and blood clotting (B) Are prone to rancid oxidation (C ... (as their complete removal is very difficult) (D) Have affinity to retain harmful sulphur compounds

Last Answer : (A) Cause cholesterol build up and blood clotting

Hydrogenation of vegetable oils is a/an __________ reaction. (A) Endothermic (B) Autocatalytic (C) Exothermic (D) Homogenous

Description : Hydrogenation of vegetable oils is a/an __________ reaction. (A) Endothermic (B) Autocatalytic (C) Exothermic (D) Homogenous

Last Answer : (C) Exothermic

Commercial production of Vanaspati is done by __________ of edible vegetable oils. (A) Hydrogenation (B) Oxidation (C) Hydrolysis (D) Hydrocracking

Description : Commercial production of Vanaspati is done by __________ of edible vegetable oils. (A) Hydrogenation (B) Oxidation (C) Hydrolysis (D) Hydrocracking

Last Answer : (A) Hydrogenation

Most commonly used rubber vulcanisation agent is (A) Sulphur (B) Bromine (C) Platinum (D) Alumina

Description : Most commonly used rubber vulcanisation agent is (A) Sulphur (B) Bromine (C) Platinum (D) Alumina

Last Answer : (A) Sulphur

. Most commonly used rubber vulcanising agent is (A) Sulphur (B) Bromine (C) Platinum (D) Alumina

Description : . Most commonly used rubber vulcanising agent is (A) Sulphur (B) Bromine (C) Platinum (D) Alumina

Last Answer : (A) Sulphur

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Oils and fats are converted to soap in a process called (A) Hydrogenation (B) Esterification (C) Saponification (D) None of these

Description : Oils and fats are converted to soap in a process called (A) Hydrogenation (B) Esterification (C) Saponification (D) None of these

Last Answer : (C) Saponification

Pick out the correct statement. (A) A fat is converted into oil by its hydrogenation (B) There is no difference between a fat and an oil so far as its physical properties are concerned (C) All vegetable oils except coconut oil, contains fatty acids having more than sixteen carbon atoms (D) Vegetable oils are classified as drying, non-drying and semi drying oils depending upon their fatty acids content

Description : Pick out the correct statement. (A) A fat is converted into oil by its hydrogenation (B) There is no difference between a fat and an oil so far as its physical properties are ... Vegetable oils are classified as drying, non-drying and semi drying oils depending upon their fatty acids content

Last Answer : (C) All vegetable oils except coconut oil, contains fatty acids having more than sixteen carbon atoms

A 'unit process' is exemplified by the (A) Distillation (B) Hydrogenation of oils (C) Absorption (D) Humidification

Description : A 'unit process' is exemplified by the (A) Distillation (B) Hydrogenation of oils (C) Absorption (D) Humidification

Last Answer : (B) Hydrogenation of oils

Addition of H2 to acetylene gives ethane in presence of palladium but if BaSO4 and quinoline or sulphur are also added, the product is ethane. Why ?

Description : Addition of H2 to acetylene gives ethane in presence of palladium but if BaSO4 and quinoline or sulphur are also added, the product is ethane. Why ?

Last Answer : Ans. BaSO4 + quinoline / s poison the catalyst. Hence, the efficiency of the catalyst decreases and the reaction stops at the first stage of reduction. 

Carbon particles accumulated on the catalyst used in the gas oil cracking lies in the category of __________ poison. (A) Deposited (B) Chemisorbed (C) Selectivity (D) Stability

Description : Carbon particles accumulated on the catalyst used in the gas oil cracking lies in the category of __________ poison. (A) Deposited (B) Chemisorbed (C) Selectivity (D) Stability

Last Answer : (A) Deposited

What is meant by hydrogenation of oils?

Description : What is meant by hydrogenation of oils?

Last Answer : The process of converting liquid oils into solids saturated fats by passing hydrogen gas through them is called hydrogenation of oils. Finely divided nickel is used as catalyst during the process. Ex: Vanaspathi

Liquid oils can be converted to solid fats by (a) Hydrogenation (b) Saponification (c) Hydrolysis (d) Oxidation of double bonds

Description : Liquid oils can be converted to solid fats by (a) Hydrogenation (b) Saponification (c) Hydrolysis (d) Oxidation of double bonds

Last Answer : Hydrogenation

Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil(B) Sintering of porous catalyst(C) Hydrogen embrittlement(D) All (A), (B) and (C)

Description : Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil (B) Sintering of porous catalyst (C) Hydrogen embrittlement (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Zeolite is used in the (A) Water treatment (B) Glass manufacture (C) Hydrogenation of fatty oil as a catalyst (D) Development of exposed photographic plate

Description : Zeolite is used in the (A) Water treatment (B) Glass manufacture (C) Hydrogenation of fatty oil as a catalyst (D) Development of exposed photographic plate

Last Answer : (A) Water treatment

A mixture of chlorine & sodium bromide acts as a/an (A) Insecticides (B) Analgesic drug (C) Fire retardant (D) Hydrogenation catalyst

Description : A mixture of chlorine & sodium bromide acts as a/an (A) Insecticides (B) Analgesic drug (C) Fire retardant (D) Hydrogenation catalyst

Last Answer : (C) Fire retardant

Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Description : Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Last Answer : (B) Slurry

Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Last Answer : (B) Vanadium

Which of the following statements are false about benzene? (a) It is a planar molecule with bond angles 120°(b) It is immiscible with water forming the lower layer. (c) It can be converted into cyclohexane by hydrogenation at 200°C in the presence of Ni catalyst. (d) It reacts with ethyl chloride in the presence of aluminium chloride to form ethylbenzene..

Description : Which of the following statements are false about benzene? (a) It is a planar molecule with bond angles 120°. (b) It is immiscible with water forming the lower layer. (c) It can be ... Ni catalyst. (d) It reacts with ethyl chloride in the presence of aluminium chloride to form ethylbenzene.

Last Answer : It is immiscible with water forming the lower layer

Which one of the following is not a metal catalyst for the hydrogenation of an alkene? (a) Pd (b) Pt (c) Na(d) Ni

Description : Which one of the following is not a metal catalyst for the hydrogenation of an alkene? (a) Pd (b) Pt (c) Na (d) Ni

Last Answer : Na

2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Description : 2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene

Last Answer : 2-Butene

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Description : Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these

Last Answer : (C) Increasing the temperature

Catalyst used in the oxidation of ammonia is (A) Platinum-beryllium (B) Platinum-rhodium (C) Cobalt-molybdenum (D) Platinum-molybdenum

Description : Catalyst used in the oxidation of ammonia is (A) Platinum-beryllium (B) Platinum-rhodium (C) Cobalt-molybdenum (D) Platinum-molybdenum

Last Answer : (B) Platinum-rhodium

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

. Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poiso(D) All (A), (B) and (C)ning tendency

Description : . Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like (A) High cost (B) Fragile nature (C) Easy poisoning tendency (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Description : Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)