Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

1 Answer

Answer :

(4) Lubricating oil Explanation: Lubricating oil is the most commonly used lubricant because of its wide range of possible applications. The two basic categories of lube oil are mineral and synthetic.

Related questions

Description : Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Last Answer : Gasoline

Description : The average boiling point of aviation turbine fuel is closest to that of (A) Lubricating oils (B) LPG (C) Diesel (D) Kerosene

Last Answer : (D) Kerosene

Description : The proper arrangement of the petroleum fractions in order of their boiling points is (A) Lubricating oil > diesel > petrol > LPG (B) Lubricating oil > petrol > diesel > LPG (C) Petrol > lubricating oil > diesel > LPG (D) Petrol > diesel > LPG > lubricating oil

Last Answer : (A) Lubricating oil > diesel > petrol > LPG

Description : Which petroleum refinery product has the lowest boiling point? -General Knowledge

Last Answer : The answer is 'Gasoline'

Description : Which petroleum refinery product has the lowest boiling point? -Do You Know?

Last Answer : answer:

Description : Which petroleum refinery product has the lowest boiling point? -General Knowledge

Last Answer : answer:

Description : Which petroleum refinery product has the lowest boiling point? -General Knowledge

Last Answer : answer:

Description : Which petroleum refinery product has the lowest boiling point?

Last Answer : Gasoline

Description : 1. Which country has the briefest Constitution in the world? 2. Which petroleum refinery product has the lowest boiling point? 3. In which policy India opted for Mixed Economy'? 4. In which state ... was given in which year? 20. During which reign was the East India Company founded in London?

Last Answer : Answer : 1. USA 2. Gasoline 3. Industrial Policy of 1948 4. Andhra Pradesh 5. Firdausi 6. 3½ ft 7. Hargobind Khurana 8. B. R. Ambedkar 9. NH 7 10. Punjab and Sind 11. Neutron 12. Junko Tabei 13. ... 16. Dr. F G. Banting 17. About 3 years since Dec 9, 1946 18. Wrought iron 19. 1991 20. Akbar

Description : In a refinery petroleum crude is fractionated into gas fraction, light ends, intermediate distillates, heavy distillates, residues and by products. The group of products including gas oil, diesel oil and ... the fraction (A) Heavy distillates (B) Intermediate distillates (C) Light ends (D) Residues

Last Answer : (A) Heavy distillates

Description : Aromatics are desired constituents of (A) Lubricating oil (B) Diesel (C) Kerosene (D) Petrol

Last Answer : (D) Petrol

Description : Which temperature for a lubricating oil will be lowest ? (A) Flash point (B) Fire point (C) Pour point (D) Boiling

Last Answer : Ans: C

Description : Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene (C) Adsorb arsenic from feedstock to catalytic reforming (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Last Answer : ANSWER : D

Description : Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Last Answer : ANSWER c. gasoline

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

Description : Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Last Answer : (D) Kerosene

Description : For rapid curing cutbacks, the oil used is (A) Gasoline (B) Kerosene oil (C) Light diesel (D) Heavy diesel

Last Answer : Answer: Option A

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Description : . __________ is not an important refinery process for upgrading the quality of lubricating oil. (A) Deoiling (B) Solvent refining (C) Clay treatment (D) Hydro-treatment

Last Answer : (A) Deoiling

Description : The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Last Answer : (C) Diesel oil

Description : Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Last Answer : (A) Naphtha

Description : _______ is one of the product formed during refining of petroleum which is black and sticky solid used for making roads. a) paraffin wax b)asphalt c)kerosene d) gasoline

Last Answer : b)asphalt

Description : Which of the following petroleum products contain minimum sulphur? (A) Naphtha (B) Kerosene (C) LSHS (D) Furnace oil

Last Answer : (A) Naphtha

Description : Which of the following has the lowest flash point of all? (A) Diesel (B) Kerosene (C) Petrol

Last Answer : (C) Petrol

Description : Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Last Answer : (A) Olefins and aromatic

Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Last Answer : (A) Aromatics

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Description : The main pollutant in waste water discharged from a petroleum refinery is oil (both in free and emulsified form). Free oil is removed by (A) Biological oxygen pond (B) Aerated lagoons (C) Trickling filters (D) Gravity separator having oil skimming devices

Last Answer : (D) Gravity separator having oil skimming devices

Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Last Answer : (D) Heavy fuel oil

Description : Which of the following fractions of petroleum contains maximum sulphur? (A) Diesel (B) Gasoline (C) Naphtha (D) Atmospheric residue

Last Answer : (D) Atmospheric residue

Description : Which of the following medium is compressed in a diesel engine cylinder? a. air b. air and fuel c. air and lubricating oil d. fuel

Last Answer : ANSWER a. air

Description : Coast Guard Regulations (46 CFR) require that the emergency diesel generator engine shut down when _____________. A. lubricating oil pressure is lost B. the engine overspeeds dangerously C. fixed CO2 is released into the emergency diesel generator space D. all of the above

Last Answer : Answer: D

Description : Soap is prepared by boiling caustic soda with – (1) Alcohol (2) Kerosene oil (3) Glycerine (4) Fats

Last Answer : (4) Fats Explanation: The most basic kind of soap is made from cuastic soda and animal fat. The two are heated together, and then cooled. The process is called "saponification". In technical ... hydrolysis of triglyeerides which are esters of fatty acids, to form the sodium salt, of a carboxylate.

Description : Soap is prepared by boiling caustic soda with (1) Alcohol (2) Kerosene oil (3) Glycerine (4) Fats

Last Answer : Fats

Description : What Gasoline and kerosene among other products are made from?

Last Answer : hi

Description : The fuel -substance that causes minimum atmospheric pollution is (a) hydrogen (b) kerosene oil (c) coke (d) gasoline

Last Answer : Ans:(a)

Description : Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil

Last Answer : (A) Gasoline

Description : Which of the following is the lightest and most volatile liquid fuel?  A.Gasoline  B.Kerosene  C.Fuel oil

Last Answer : Answer: A

Description : Which of the following has the maximum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil

Last Answer : (C) Petrol

Description : Which of the following contains maximum sulphur? (A) Diesel (B) Petrol (C) Kerosene (D) Fuel oil

Last Answer : (D) Fuel oil

Description : Which of the following has the minimum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil

Last Answer : (D) Furnace oil

Description : What does it cost a refinery to produce just one gallon of regular unleaded gasoline?

Last Answer : According to DW-World the price of Petrol in Germany in 2007 was made up as follows: 0.4 €cent per litre for getting crude oil out of the ground. 0.1 €cent per litre for getting across the Suez ... That is about 6.6 dollars per gallon for you Americans. (assuming I did not screw up the conversion)

Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Description : Tray spacing in a distillation column of dia 10-12 ft. used in petroleum refinery may be around __________ inches. (A) 5 (B) 30 (C) 60 (D) 100

Last Answer : (B) 30

Description : Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in ... unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Last Answer : (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature

Description : Irradiation of water by ultraviolet light of suitable wavelength iscommonly used for disinfection of water in (A) Food industry (B) Municipal sewage treatment (C) Petroleum refinery (D) Iron & steel plant

Last Answer : (A) Food industry

Description : Which of the following plants does not emit appreciable amount of SO2 in atmosphere? (A) Thermal power plant (B) Petroleum refinery (C) Nitric acid plant (D) Sulphuric acid plant

Last Answer : (C) Nitric acid plant

Description : Moist climate is the most favourable factor in the site selection far a (A) Steel plant (B) Textile factory (C) Petroleum refinery (D) Coke oven battery

Last Answer : (B) Textile factory

Description : Mention two products of an oil refinery. -SST 10th

Last Answer : Products of an oil refinery: (i) Lubricants (ii) Kerosene Oil refineries along the coast—Vishakhapatnam Oil refineries away from the coast—Bangigon.