Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Visbreaking process is used mainly for making
(A) High cetane diesel
(B) High octane gasoline
(C) Fuel oil
(D) Smoke free kerosene
by

1 Answer

Answer :

(C) Fuel oil
by

Related questions

Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Description : Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Last Answer : (C) Petrol increases its octane number

Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Description : Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Last Answer : Gasoline

Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Description : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Last Answer : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Description : Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Last Answer : (D) Kerosene

Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Description : Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Last Answer : (C) Produces fuel oil of lower viscosity

Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Description : Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Last Answer : ANSWER : D

Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Description : Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Last Answer : ANSWER c. gasoline

Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability

Description : Cetane number of a diesel fuel is the measure of its (A) Ignition delay (B) Smoke point (C) Viscosity (D) Oxidation stability

Last Answer : (A) Ignition delay

Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Description : Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Last Answer : (A) Olefins and aromatic

Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Description : Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Last Answer : (B) Octane number

Ignition quality of diesel is expressed by a. octane number b. cetane number c. calorific value d. carbon content

Description : Ignition quality of diesel is expressed by a. octane number b. cetane number c. calorific value d. carbon content

Last Answer : ANSWER b. cetane number

Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Description : Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Last Answer : (4) Lubricating oil Explanation: Lubricating oil is the most commonly used lubricant because of its wide range of possible applications. The two basic categories of lube oil are mineral and synthetic.

For rapid curing cutbacks, the oil used is (A) Gasoline (B) Kerosene oil (C) Light diesel (D) Heavy diesel

Description : For rapid curing cutbacks, the oil used is (A) Gasoline (B) Kerosene oil (C) Light diesel (D) Heavy diesel

Last Answer : Answer: Option A

The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Description : The two reference fuel used for cetane rating are (a) Cetane and iso octane (b) Cetane and tetra ethyl lead (c) Cetance and n-heptane (d) Cetane and α- methyl naphthalene

Last Answer : Ans : d

Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil

Description : Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil

Last Answer : (A) Gasoline

Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of light distillates (B) Suppress coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Description : Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of ... coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Last Answer : (B) Suppress coke formation

The fuel -substance that causes minimum atmospheric pollution is (a) hydrogen (b) kerosene oil (c) coke (d) gasoline

Description : The fuel -substance that causes minimum atmospheric pollution is (a) hydrogen (b) kerosene oil (c) coke (d) gasoline

Last Answer : Ans:(a)

Which of the following is the lightest and most volatile liquid fuel?  A.Gasoline  B.Kerosene  C.Fuel oil

Description : Which of the following is the lightest and most volatile liquid fuel?  A.Gasoline  B.Kerosene  C.Fuel oil

Last Answer : Answer: A

Which of the following contains maximum sulphur? (A) Diesel (B) Petrol (C) Kerosene (D) Fuel oil

Description : Which of the following contains maximum sulphur? (A) Diesel (B) Petrol (C) Kerosene (D) Fuel oil

Last Answer : (D) Fuel oil

The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Description : The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Last Answer : (C) Diesel oil

Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Description : Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Last Answer : (A) Resistance to knock

Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation(C) Reduce the pour point(D) Increase its octane numbe

Description : Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation (C) Reduce the pour point (D) Increase its octane numbe

Last Answer : (D) Increase its octane numbe

Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Last Answer : (A) Aromatics

Fuel oil is subjected to visbreaking to reduce its (A) Pour point (B) Viscosity (C) Pressure drop on pumping (D) All (A), (B) and (C

Description : Fuel oil is subjected to visbreaking to reduce its (A) Pour point (B) Viscosity (C) Pressure drop on pumping (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Which of the following has maximum hydrogen/carbon ratio (by weight)? (A) Naphtha (B) Gasoline (C) Diesel (D) Fuel oil

Description : Which of the following has maximum hydrogen/carbon ratio (by weight)? (A) Naphtha (B) Gasoline (C) Diesel (D) Fuel oil

Last Answer : (B) Gasoline

A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol

Description : A fuel of cetane number 40 has the same ignition quality as a mixture of a) 40% cetane and 60% alpha methyl naphthalene b) 40% alpha methyl naphthalene and 60% cetane c) 40% petrol and 60% diesel d) 40% diesel and 60% petrol

Last Answer : Answer: a Explanation: A fuel of cetane number 40 has the same ignition quality as a mixture of 40% cetane and 60% alpha methyl naphthalene as cetane number is counted on cetane percentage.

The tendency of a diesel engine to knock increases if a. engine speed is increased b. engine power is increased c. cetane number of the fuel is increased d. compression ratio is increased

Description : The tendency of a diesel engine to knock increases if a. engine speed is increased b. engine power is increased c. cetane number of the fuel is increased d. compression ratio is increased

Last Answer : ANSWER d. compression ratio is increased

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Do fuel efficient cars typically use higher octane gasoline?

Description : Do fuel efficient cars typically use higher octane gasoline?

Last Answer : No, higher octane fuel is only necessary for higher performance cars. Highly efficient cars can usually use the lowest octane fuels, because they are not designed for performance.

Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Description : Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Last Answer : ANSWER d. all of the above

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

A mixture containing 65% of iso-octane and 35% of normal heptane will have a) cetane number 65 b) octane number 65 c) cetane number 35 d) octane number 35

Description : A mixture containing 65% of iso-octane and 35% of normal heptane will have a) cetane number 65 b) octane number 65 c) cetane number 35 d) octane number 35

Last Answer : Answer: b Explanation: A mixture containing 65% of iso-octane and 35% of normal heptane will have octane number 65 as octane number is the number percentage containing iso-octane.

Ignition quality of petrol is expressed by a. Octane number b. cetane number c. calorific value d. self-ignition temperature

Description : Ignition quality of petrol is expressed by a. Octane number b. cetane number c. calorific value d. self-ignition temperature

Last Answer : ANSWER a. Octane number

The quality of petrol is expressed in terms of – (1) Cetane number (2) Gold number (3) Octane number (4) Added unlead compounds

Description : The quality of petrol is expressed in terms of – (1) Cetane number (2) Gold number (3) Octane number (4) Added unlead compounds

Last Answer : (3) Octane number Explanation: Octane rating or octane number is a standard measure of the of the ignition quality of has (gasoline or petrol). Higher this number, the less ... premature burning in the combustioncharnber) when burnt in a standard (spark-ignition internal combustion) engine.

Definition Of Octane Number And Cetane Number?

Description : Definition Of Octane Number And Cetane Number?

Last Answer : Octane No:-Octane number is defined as the percentage, by volume, of iso octane in the mixture of iso octane and h-heptane. It is the measure of rating of SI engine. Cetane No:- Cetane number ... in the mixture of n-cetane and alpha methyl naphthalene. It is the measure of rating of CI engine.

The quality of petrol is expressed in terms of (1) Cetane number (2) Gold number (3) Octane number (4) Added unlead compounds

Description : The quality of petrol is expressed in terms of (1) Cetane number (2) Gold number (3) Octane number (4) Added unlead compounds

Last Answer : Octane number

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

The average boiling point of aviation turbine fuel is closest to that of (A) Lubricating oils (B) LPG (C) Diesel (D) Kerosene

Description : The average boiling point of aviation turbine fuel is closest to that of (A) Lubricating oils (B) LPG (C) Diesel (D) Kerosene

Last Answer : (D) Kerosene

__________ is used as jet engine fuel. (A) Petrol (B) Diesel(C) Kerosene(D) LPG

Description : __________ is used as jet engine fuel. (A) Petrol (B) Diesel (C) Kerosene (D) LPG

Last Answer : (C) Kerosene

Cetane number of high speed diesel must be ≥ (A) 30 (B) 45 (C) 75 (D) 95

Description : Cetane number of high speed diesel must be ≥ (A) 30 (B) 45 (C) 75 (D) 95

Last Answer : (B) 45

What is the quality rating for diesel fuel, similar to the octane number for petrol?

Description : What is the quality rating for diesel fuel, similar to the octane number for petrol?

Last Answer : Catane number

A fuel of an octane number rating of 75 matches in knocking intensity as a mixture of a) 75% iso-octane and 25% normal heptane b) 75% normal heptane and 25% iso-octane c) 75% petrol and 25% diesel d) 75% diesel and 25% petrol

Description : A fuel of an octane number rating of 75 matches in knocking intensity as a mixture of a) 75% iso-octane and 25% normal heptane b) 75% normal heptane and 25% iso-octane c) 75% petrol and 25% diesel d) 75% diesel and 25% petrol

Last Answer : Answer: a Explanation: None.

_______ is one of the product formed during refining of petroleum which is black and sticky solid used for making roads. a) paraffin wax b)asphalt c)kerosene d) gasoline

Description : _______ is one of the product formed during refining of petroleum which is black and sticky solid used for making roads. a) paraffin wax b)asphalt c)kerosene d) gasoline

Last Answer : b)asphalt

Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Description : Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Last Answer : (D) 97

Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Description : Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Last Answer : (A) Naphtha

Which of the following has the maximum °API gravity of all? (A) Diesel(B) Kerosene(C) Petrol(D) Furnace oil

Description : Which of the following has the maximum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil

Last Answer : (C) Petrol

Aromatics are desired constituents of (A) Lubricating oil (B) Diesel (C) Kerosene (D) Petrol

Description : Aromatics are desired constituents of (A) Lubricating oil (B) Diesel (C) Kerosene (D) Petrol

Last Answer : (D) Petrol

Which of the following has the minimum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil

Description : Which of the following has the minimum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil

Last Answer : (D) Furnace oil

Which among them is cleaner fuel –coal , LPG, Diesel , kerosene ? a) coal b)LPG c)diesel d)kerosene

Description : Which among them is cleaner fuel –coal , LPG, Diesel , kerosene ? a) coal b)LPG c)diesel d)kerosene

Last Answer : b)LPG