Aromatics are desired constituents of (A) Lubricating oil (B) Diesel (C) Kerosene (D) Petrol

Aromatics are desired constituents of
(A) Lubricating oil
(B) Diesel
(C) Kerosene
(D) Petrol
by

1 Answer

Answer :

(D) Petrol
by

Related questions

Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Description : Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Last Answer : (C) Petrol increases its octane number

Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Description : Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Last Answer : (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Description : Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Last Answer : (4) Lubricating oil Explanation: Lubricating oil is the most commonly used lubricant because of its wide range of possible applications. The two basic categories of lube oil are mineral and synthetic.

Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Description : Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Last Answer : Gasoline

The proper arrangement of the petroleum fractions in order of their boiling points is (A) Lubricating oil > diesel > petrol > LPG (B) Lubricating oil > petrol > diesel > LPG (C) Petrol > lubricating oil > diesel > LPG (D) Petrol > diesel > LPG > lubricating oil

Description : The proper arrangement of the petroleum fractions in order of their boiling points is (A) Lubricating oil > diesel > petrol > LPG (B) Lubricating oil > petrol > diesel > LPG (C) Petrol > lubricating oil > diesel > LPG (D) Petrol > diesel > LPG > lubricating oil

Last Answer : (A) Lubricating oil > diesel > petrol > LPG

Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Description : Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Last Answer : (C) Mercaptans

Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Description : Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Last Answer : (A) Olefins and aromatic

Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Last Answer : (A) Aromatics

The average boiling point of aviation turbine fuel is closest to that of (A) Lubricating oils (B) LPG (C) Diesel (D) Kerosene

Description : The average boiling point of aviation turbine fuel is closest to that of (A) Lubricating oils (B) LPG (C) Diesel (D) Kerosene

Last Answer : (D) Kerosene

Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Description : Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Last Answer : (B) Causes olefins to combine with each other

Which of the following has the maximum °API gravity of all? (A) Diesel(B) Kerosene(C) Petrol(D) Furnace oil

Description : Which of the following has the maximum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil

Last Answer : (C) Petrol

Which of the following contains maximum sulphur? (A) Diesel (B) Petrol (C) Kerosene (D) Fuel oil

Description : Which of the following contains maximum sulphur? (A) Diesel (B) Petrol (C) Kerosene (D) Fuel oil

Last Answer : (D) Fuel oil

Which of the following has the minimum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil

Description : Which of the following has the minimum °API gravity of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oil

Last Answer : (D) Furnace oil

Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Description : Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Last Answer : (B) Lubricating oils

Which of the following has the lowest flash point of all? (A) Diesel (B) Kerosene (C) Petrol

Description : Which of the following has the lowest flash point of all? (A) Diesel (B) Kerosene (C) Petrol

Last Answer : (C) Petrol

Which of the following has the highest flash point of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oi

Description : Which of the following has the highest flash point of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oi

Last Answer : (D) Furnace oil

__________ is used as jet engine fuel. (A) Petrol (B) Diesel(C) Kerosene(D) LPG

Description : __________ is used as jet engine fuel. (A) Petrol (B) Diesel (C) Kerosene (D) LPG

Last Answer : (C) Kerosene

What is the difference between petrol , diesel and kerosene ?

Description : What is the difference between petrol , diesel and kerosene ?

Last Answer : Petrol , diesel and kerosene are both hydrocarbons. However , they differ depending on the number of carbons . degree c they are diesel. Their carbon number is up to 17-20 . And the part whose boiling point is 121-170 degree c they are kerosene. Their carbon number is up to 11-16 .

Self-propelled combine harvester is provide with a) Powering engine b) Petrol engine c) Diesel engine d) Kerosene engine

Description : Self-propelled combine harvester is provide with a) Powering engine b) Petrol engine c) Diesel engine d) Kerosene engine

Last Answer : Diesel engine

Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ?

Description : Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ?

Last Answer : In two-stroke engine lub oil is mixed with petrol and thus some lub oil is blown out through the exhaust valves by scavenging and charging air. There is no such wastage in four stroke petrol engine.

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Description : Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Last Answer : (C) n-paraffins

Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Description : Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Last Answer : (C) Aromatics

Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Description : Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Last Answer : (A) Aromatics

Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Description : Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Last Answer : (B) Paraffins

Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Description : Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Last Answer : (B) High smoke point

Which of the following medium is compressed in a diesel engine cylinder? a. air b. air and fuel c. air and lubricating oil d. fuel

Description : Which of the following medium is compressed in a diesel engine cylinder? a. air b. air and fuel c. air and lubricating oil d. fuel

Last Answer : ANSWER a. air

Coast Guard Regulations (46 CFR) require that the emergency diesel generator engine shut down when _____________. A. lubricating oil pressure is lost B. the engine overspeeds dangerously C. fixed CO2 is released into the emergency diesel generator space D. all of the above

Description : Coast Guard Regulations (46 CFR) require that the emergency diesel generator engine shut down when _____________. A. lubricating oil pressure is lost B. the engine overspeeds dangerously C. fixed CO2 is released into the emergency diesel generator space D. all of the above

Last Answer : Answer: D

The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Description : The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Last Answer : (C) Feedstock for fluid catalytic cracking unit

Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Last Answer : (D) Heavy fuel oil

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Description : Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Last Answer : (A) Naphtha

Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Description : Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Last Answer : (D) Kerosene

Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Description : Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Last Answer : ANSWER : D

Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Description : Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Last Answer : ANSWER c. gasoline

For rapid curing cutbacks, the oil used is (A) Gasoline (B) Kerosene oil (C) Light diesel (D) Heavy diesel

Description : For rapid curing cutbacks, the oil used is (A) Gasoline (B) Kerosene oil (C) Light diesel (D) Heavy diesel

Last Answer : Answer: Option A

Which of the following has the highest viscosity of all (at a given temperature)? (A) Naphtha (B) Fuel oil (C) Light diesel oil (D) Petrol

Description : Which of the following has the highest viscosity of all (at a given temperature)? (A) Naphtha (B) Fuel oil (C) Light diesel oil (D) Petrol

Last Answer : (B) Fuel oil

Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium

Description : Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium

Last Answer : (A) Brass

The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel

Description : The self-ignition temperature of diesel oil compared to petrol is a. higher b. lower c. same d. depends on the quality of fuel

Last Answer : ANSWER a. higher

Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Description : Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Last Answer : Ans:(b)

Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these

Description : Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these

Last Answer : (A) Abel apparatus

Can petrol be used as a replacement for kerosene?

Description : Can petrol be used as a replacement for kerosene?

Last Answer : Petrol should not be used as a replacement for kerosene, as it can cause damage to heaters or lamps designed for use with kerosene.

What is the difference between petrol and kerosene?

Description : What is the difference between petrol and kerosene?

Last Answer : Petrol is a lighter, more volatile fuel than kerosene, which is a heavier fuel used primarily for heating and lighting.

Which of the following is used to remove rust stains on cloth? (1) Kerosene (2) Lime (3) Oxalic acid solution (4) Petrol

Description : Which of the following is used to remove rust stains on cloth? (1) Kerosene (2) Lime (3) Oxalic acid solution (4) Petrol

Last Answer : (3) Oxalic acid solution Explanation: Oxalic acid is an organic compound with the formula H2C2O2. It is a colourless crystalline solid that dissolves in water to give colourless solutions. It is classified ... agent and its conjugate base, known as oxalate , is a chelating agent for metal cations.

Which one of the following has highest calorific value? a) kerosene b)biogas c)LPG d)petrol

Description : Which one of the following has highest calorific value? a) kerosene b)biogas c)LPG d)petrol

Last Answer : c)LPG

Denatured spirit is ethanol mixed with (1) Petrol (2) Kerosene (3) Water (4) Pyridine

Description : Denatured spirit is ethanol mixed with (1) Petrol (2) Kerosene (3) Water (4) Pyridine 

Last Answer : Pyridine

Which of the following is used to remove rust stains on cloth? (1) Kerosene (2) Lime (3) Oxalic acid solution (4) Petrol

Description : Which of the following is used to remove rust stains on cloth? (1) Kerosene (2) Lime (3) Oxalic acid solution (4) Petrol 

Last Answer : Oxalic acid solution

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these

Description : Viscosity index of a lubricating oil (A) Is the measure of its flash point (B) Is the measure of variation of viscosity with temperature (C) Should be low (D) None of these

Last Answer : (B) Is the measure of variation of viscosity with temperature