1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

1 kg of a saturated aqueous solution of a highly soluble component A at
60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at
60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals
formed is:
(A) 0.4
(B) 0.25
(C) 0.2
(D) 0.175
by

1 Answer

Answer :

(C) 0.2
by

Related questions

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Description : Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Last Answer : Answer : C

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and there are also added 105.5 kJ of heat. Determine t2. (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

If a dilute solution of aqueous `NH_(3)` is saturated with `H_(2)S` then the product formed is :

Description : If a dilute solution of aqueous `NH_(3)` is saturated with `H_(2)S` then the product formed is :

Last Answer : If a dilute solution of aqueous `NH_(3)` is saturated with `H_(2)S` then the product formed is : A. `(NH_(4))_( ... (NH_(4))_(2)S_(x)` D. `NH_(4)OH+S`

Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage of lipid soluble drugs into the brain C. It limits entry of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Description : Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage ... of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Last Answer : D. It regulates passage of substances from brain into blood

Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage of lipid soluble drugs into the brain C. It limits entry of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Description : Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage ... of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Last Answer : D. It regulates passage of substances from brain into blood

Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage of lipid soluble drugs into the brain C. It limits entry of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Description : Which of the following is not true of the blood-brain barrier: A. It is constituted by tight junctions between the endothelial cells of brain capillaries and the glial tissue B. It allows passage ... of highly ionized drugs into the brain D. It regulates passage of substances from brain into blood

Last Answer : D. It regulates passage of substances from brain into blood

Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Description : Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Last Answer : (C) Is soluble in ammonium chloride and potassium chloride solution

For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Description : For concentrating an aqueous solution of a material like anhydrous Na2SO4, whose solubility decreases with rise in temperature, the most suitable evaporator is a __________ evaporator. (A) High pressure (B) Vacuum (C) Backward feed (D) None of these

Last Answer : (B) Vacuum

Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) Humidified with wet bulb temperature decreasingB) Humidified at constant wet bulb temperature(C) Dehumidified(D) None of these

Description : Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) ... temperature decreasing B) Humidified at constant wet bulb temperature (C) Dehumidified (D) None of these

Last Answer : (A) Humidified with wet bulb temperature decreasing

Unsaturated air (with dry and wet bulb temperatures being 35 and 25°C respectively) is passed through water spray chamber maintained at 35°C. The air will be (A) Cooled (B) Humidified (C) Both (A) & (B) (D) Dehumidified

Description : Unsaturated air (with dry and wet bulb temperatures being 35 and 25°C respectively) is passed through water spray chamber maintained at 35°C. The air will be (A) Cooled (B) Humidified (C) Both (A) & (B) (D) Dehumidified

Last Answer : (B) Humidified

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

. An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Description : . An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Last Answer : (A) 4000

In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by aslowly falling body weighing 40 kg through a height of 4 m. The process isrepeated 500 times. The acceleration due to gravity is 9.8 ms-2. Neglectingthe heat capacity of agitator, the temperature of water (in °C) is(A) 40.5(B) 34.4(C) 26.8(D) 25

Description : In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by a slowly falling body weighing 40 kg through a height of 4 m. The process is repeated ... temperature of water (in °C) is (A) 40.5 (B) 34.4 (C) 26.8 (D) 25

Last Answer : (B) 34.4

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Description : Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Last Answer : Ans : Solute : The component of the solution present in smaller amount is called solute. It is also defined as the substance that gets dissolved in the solvent. Example : Glucose is solute in glucose solution. ... grams / 100 grams. Solubility of sugar in water at 100 degree C is 487 grams/100 ml.

Which of the following is NOT a general property of hydroxide bases in aqueous solution? w) High solubility x) Bitter taste y) Ability to neutralize aqueous acid solutions z) Ability to change phenolphthalein from colorless to red

Description : Which of the following is NOT a general property of hydroxide bases in aqueous solution? w) High solubility x) Bitter taste y) Ability to neutralize aqueous acid solutions z) Ability to change phenolphthalein from colorless to red

Last Answer : ANSWER: W -- HIGH SOLUBILITY (The hydroxides of the alkali metals are soluble in water but all the other metal hydroxides are only moderately or sparingly soluble.)

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

A gas X is passed through water to form a saturated solution. The aqueous solution on treatment with silver nitrate gives a white precipitate. The sat

Description : A gas X is passed through water to form a saturated solution. The aqueous solution on treatment with silver nitrate gives a white precipitate. The sat

Last Answer : A gas X is passed through water to form a saturated solution. The aqueous solution on treatment with silver nitrate ... (D) X = `H_2`, Y = `Cl_2 `

A gas X is passed through water to form a saturated solution. The aqueous solution on treatment with silver nitrate gives a white precipitate. The sat

Description : A gas X is passed through water to form a saturated solution. The aqueous solution on treatment with silver nitrate gives a white precipitate. The sat

Last Answer : A gas X is passed through water to form a saturated solution. The aqueous solution on treatment with silver nitrate gives ... ` D. `X=H_(2), Y=Cl_(2)`

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Description : Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Last Answer : (D) Boiling of a liquid on a hot surface

In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg

Description : In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg 

Last Answer : Constant pressure process Final condition of steam is dry saturated Enthalpy of dry steam = hg= hf + hfg =2776.2 KJ/Kg .Given Latent heat of vaporization = hfg = hg - hf =2776.2-762.6 =2013.6 KJ/Kg Initial condition ... hfg = 762.6+0.8 X 2013.6 =2373.48 KJ/Kg Heat added = hg-hw = 402.72 KJ/kg

On increasing the temperature the solubility of most of the gases in water decreases. An important consequence of this effect is the thermal pollution of water, such as occurs around power plants cooled by a river or stream. How is the survival of fish affected by thermal pollution of water?

Description : On increasing the temperature the solubility of most of the gases in water decreases. An important consequence of this effect is the thermal pollution of water, such as occurs around power plants cooled by a river or stream. How is the survival of fish affected by thermal pollution of water? 

Last Answer : Ans.: When the water temperature of the river or stream is increases the solubility of oxygen in water decreases. Due to this decrease in dissolved oxygen the survival of fish becomes difficult.

Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Description : Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor? (A) Molten sodium cooled (B) CO2 gas cooled (C) Pressurised water (D) Boiling water

Last Answer : (D) Boiling water

Critical solution temperature (or the con-solute temperature) for partially miscible liquids (e.g., phenol-water) is the minimum temperature at which (A) A homogeneous solution (say of phenol water) is formed (B) Mutual solubility of the two liquids shows a decreasing trend (C) Two liquids are completely separated into two layers (D) None of these

Description : Critical solution temperature (or the con-solute temperature) for partially miscible liquids (e.g., phenol-water) is the minimum temperature at which (A) A homogeneous solution (say of phenol water) is ... a decreasing trend (C) Two liquids are completely separated into two layers (D) None of these

Last Answer : (A) A homogeneous solution (say of phenol water) is formed

Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Description : Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Last Answer : (B) Saturated wate

The rough value of diffusion co-efficient of water vapor into air at 25°C may be about __________ cm2 /sec. (A) 0.25 (B) 2.5 (C) 1.25 (D) 0.0025

Description : The rough value of diffusion co-efficient of water vapor into air at 25°C may be about __________ cm2 /sec. (A) 0.25 (B) 2.5 (C) 1.25 (D) 0.0025

Last Answer : (A) 0.25

A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 - 1 shell and tube heat exchanger is available. The best arrangement is (A) Counter flow with process stream on shell side (B) Counter flow with process stream on tube side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Description : A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 ... side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Last Answer : (A) Counter flow with process stream on shell side

A standard steel tape of length 30 m and cross-section 15 × 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 × 106 kg/cm2 , the correction to be applied is (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Last Answer : (A) - 0.000909 m

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

__________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Description : __________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Last Answer : (A) Dew point

The temperature to which a vapour gas mixture must be cooled (at varying humidity) to become saturated is called the __________ temperature. (A) Dew point (B) Wet bulb (C) Dry bulb (D) None of these

Description : The temperature to which a vapour gas mixture must be cooled (at varying humidity) to become saturated is called the __________ temperature. (A) Dew point (B) Wet bulb (C) Dry bulb (D) None of these

Last Answer : (D) None of these

Boiling of milk in an open vessel is an example of __________ boiling. (A) Film (B) Sub-cooled (C) Saturated nucleate (D) None of these

Description : Boiling of milk in an open vessel is an example of __________ boiling. (A) Film (B) Sub-cooled (C) Saturated nucleate (D) None of these

Last Answer : (A) Film

A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Description : A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Last Answer : (A) Sub-cooled

Many xenobiotics are oxidized by cytochrome P450 in order to (A) increase their biological activity (B) increase their disposition in lipophilic compartments of the body (C) increase their aqueous solubility (D) all of the above

Description : Many xenobiotics are oxidized by cytochrome P450 in order to (A) increase their biological activity (B) increase their disposition in lipophilic compartments of the body (C) increase their aqueous solubility (D) all of the above

Last Answer : (D) all of the above

An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Description : An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Last Answer : Answer: Option A

Candu reactor is a __________ nuclear reactor. (A) Natural uranium fuelled heavy water cooled & moderated (B) Highly enriched uranium (85% U-235) fuelled (C) Homogeneous (D) Fast breeder

Description : Candu reactor is a __________ nuclear reactor. (A) Natural uranium fuelled heavy water cooled & moderated (B) Highly enriched uranium (85% U-235) fuelled (C) Homogeneous (D) Fast breeder

Last Answer : (A) Natural uranium fuelled heavy water cooled & moderated

`A_(3)B_(2)` is a sparingly soluble salt with molar mass `M(gmol_(-))` and solubility `x` gm `litre_(-1)`, the ratio of the molar concentration of `B^

Description : `A_(3)B_(2)` is a sparingly soluble salt with molar mass `M(gmol_(-))` and solubility `x` gm `litre_(-1)`, the ratio of the molar concentration of `B^

Last Answer : `A_(3)B_(2)` is a sparingly soluble salt with molar mass `M(gmol_(-))` and solubility `x` gm `litre_(-1)`, the ... `(1)/(54)(M^(4))/(x^(4))` D. None

gas which is collected over water becomes moistened due to water vapor, exerts its own partial pressure at the gas temperature, which is termed as its (A) Aqueous tension (B) Saturated humidity (C) Vapor pressure

Description : gas which is collected over water becomes moistened due to water vapor, exerts its own partial pressure at the gas temperature, which is termed as its (A) Aqueous tension (B) Saturated humidity (C) Vapor pressure

Last Answer : Option A

An aqueous solution of sodium chloride is prepared by dissolving 10kg of sodium chloride in 50 kg of water find (i) Weight % (ii) Mole % of solution. [Atomic weight of Na = 23, Cl = 35.5]

Description : An aqueous solution of sodium chloride is prepared by dissolving 10kg of sodium chloride in 50 kg of water find (i) Weight % (ii) Mole % of solution. [Atomic weight of Na = 23, Cl = 35.5] 

Last Answer : Weight of NaCl = 10 kg Weight of H2O = 50 kg Total weight = 60 kg Weight % of NaCl = (10/ 60) * 100 =16.67% Weight % of H2O = (50/ 60) * 100 = 83.33% Molecular weight of NaCl = 58.5 k moles of NaCl ... 100 = 5.79% Mol % of H2O = (moles of H2O / Total moles)*100  = (2.78/ 2.949)*100 = 94.26%

The comple `[Fe(H_(2)O)_(6)NO]^(2+)` is formed in the brown ring test fro nitrates when freshly prepared `FesO_(4)` solution is added to aqueous solut

Description : The comple `[Fe(H_(2)O)_(6)NO]^(2+)` is formed in the brown ring test fro nitrates when freshly prepared `FesO_(4)` solution is added to aqueous solut

Last Answer : The comple `[Fe(H_(2)O)_(6)NO]^(2+)` is formed in the brown ring test fro nitrates when ... electrons is Fe. D. All the above are correct statement.

If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Description : If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Last Answer : Answer : b

Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is (A) Superheated vapour (B) Partially condensed vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Description : Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 ... vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Last Answer : (A) Superheated vapour

What is the molar mass of haemocyanin and the freezing point of the solution when an aqueous solution is prepared by dissolving 1.5 grams of haemocyanin a protein obtained from crabs in 0.25 litres of?

Description : What is the molar mass of haemocyanin and the freezing point of the solution when an aqueous solution is prepared by dissolving 1.5 grams of haemocyanin a protein obtained from crabs in 0.25 litres of?

Last Answer : Haemocyanins are a group of proteins.

Which of the following statements is False/Incorrect about nitrobenzene? (a) is formed by nitration of benzene at temperatures below 60°C. (b) can be further nitrated to give m-dinitrobenzene. (c) can be oxidized with KMnO4 to give benzoic acid. (d) can be reduced with Sn/HCl to give aniline.

Description : Which of the following statements is False/Incorrect about nitrobenzene? (a) is formed by nitration of benzene at temperatures below 60°C. (b) can be further nitrated to give m-dinitrobenzene. (c) can be oxidized with KMnO4 to give benzoic acid. (d) can be reduced with Sn/HCl to give aniline.

Last Answer : can be oxidized with KMnO4 to give benzoic acid