An auger bit is used to drill what type of material?

An auger bit is used to drill what type of material?
by

1 Answer

Answer :

Wood
by
selected by

Related questions

Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Description : Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Last Answer : a. Spur wheel

What kind of drill bit should I use?

Description : What kind of drill bit should I use?

Last Answer : You will want to you a masonry bit. Depending on the hardness of the rock, you may need to use a hammer drill to drill into the rock.

My Ryobi drill has a bit stuck in the chuck and it wont come loose, what do i do?

Description : My Ryobi drill has a bit stuck in the chuck and it wont come loose, what do i do?

Last Answer : You can get the entire chuck off by holding the motor. The easiest way to do this is jam something into the cooling vanes. After that, just turn the entire chuck CCW. You should be able to get this ... and let it penetrate. It will probably loosen up to where you don't have to do anything drastic.

What kind of drill bit is needed for concrete?

Description : What kind of drill bit is needed for concrete?

Last Answer : Diamond Core Drill Bits are the best for concrete.

What is the compression ratio supposed to be for a jiffy 3hp ice auger?

Description : What is the compression ratio supposed to be for a jiffy 3hp ice auger?

Last Answer : Need answer

What is the compression ratio for a jiffy 3 hp ice auger?

Description : What is the compression ratio for a jiffy 3 hp ice auger?

Last Answer : Need answer

Which tool is not for making holes awl punch auger or calipers?

Description : Which tool is not for making holes awl punch auger or calipers?

Last Answer : Calipers are used for measuring small thicknesses and widths,not making holes."Outside calipers" look like tongs and could stab throughlightweight material, but that is not the primary function.

What is an earth auger used for ?

Description : What is an earth auger used for ?

Last Answer : An earth auger is a tool used for drilling holes in the ground. You can use it for making holes for putting in posts, planting trees and many other things.

Auger boring (A) Is the most primitive method for making a hole in the ground (B) Is generally employed in cohesive and other self soils above water table (C) Is most economical upto a depth of 5 metres (D) All the above

Description : Auger boring (A) Is the most primitive method for making a hole in the ground (B) Is generally employed in cohesive and other self soils above water table (C) Is most economical upto a depth of 5 metres (D) All the above

Last Answer : Answer: Option D

The Auger boring method is not suitable for (A) Very hard soil (B) Cemented soil (C) Vary soft soil (D) All the above

Description : The Auger boring method is not suitable for (A) Very hard soil (B) Cemented soil (C) Vary soft soil (D) All the above

Last Answer : Answer: Option D

A solid core of rock is formed inside the cylinder in the case of (A) Auger boring (B) Percussion drilling (C) Diamond drilling (D) Wash boring

Description : A solid core of rock is formed inside the cylinder in the case of (A) Auger boring (B) Percussion drilling (C) Diamond drilling (D) Wash boring

Last Answer : Answer: Option C

The Auger borings are not common (A) In soils that require lateral support (B) In cohesive soils (C) In soft soils (D) None of the above

Description : The Auger borings are not common (A) In soils that require lateral support (B) In cohesive soils (C) In soft soils (D) None of the above

Last Answer : Option A

The metering mechanism which is suitable for the metering of small seeds as well as large grains. (a) Internal double run mechanism (b) Fluted wheel mechanism (c) Stationary opening with auger (d) None of the above

Description : The metering mechanism which is suitable for the metering of small seeds as well as large grains. (a) Internal double run mechanism (b) Fluted wheel mechanism (c) Stationary opening with auger (d) None of the above

Last Answer : (a) Internal double run mechanism

Stereoscopic-zoom microscopes and precision drill presses are normally associated with what type of repair station?

Description : Stereoscopic-zoom microscopes and precision drill presses are normally associated with what type of repair station?

Last Answer : Microminiature repair station.

Do you have a checklist or drill for getting on board with a new computer?

Description : Do you have a checklist or drill for getting on board with a new computer?

Last Answer : No need to follow routine or anything. Laptops generally comes with OS and all the necessary programs pre installed. So you just need to backup/transfer your personal/work files into the new system. That ... where you left off. You can also remove the hard drive of the old laptop for save keeping.

Are drill sergeants trying to get one to stand up for yourselves or trying to break one down and submit?

Description : Are drill sergeants trying to get one to stand up for yourselves or trying to break one down and submit?

Last Answer : Pretty much they want everyone to do exactly as they’re told, and also to work closely as a team. Lots of times that will require some breaking down because most people show up in the military pretty stuck on themselves.

Without a drill press, what is a trick for drilling a truly vertical hole in board?

Description : Without a drill press, what is a trick for drilling a truly vertical hole in board?

Last Answer : Stand a bubble level near the place-of-drillage, and rest the dorsal edge of the drill against the long edge of the level. Ask a friend to hold the level, if necessary.

How can I avoid taking a drill to three oil pans?

Description : How can I avoid taking a drill to three oil pans?

Last Answer : Buy some big oil drip pans, fill with cat litter and place under the leaking engines. Gaskets are a thing but the leaks might be (probably are) valve covers. Put a friendly note on the windshields informing owners that ... for him to just dump 2 to 3 quarts of oil into it each day. (WHAT a mess!!)

Are there any drill team parents on Fluther, and do you have any tips for me?

Description : Are there any drill team parents on Fluther, and do you have any tips for me?

Last Answer : Don’t let her use live ammo.

I am wanting to buy a cordless drill. Can you explain the differences to me?

Description : I am wanting to buy a cordless drill. Can you explain the differences to me?

Last Answer : Battery life and power will be greater the higher the voltage. Personally I would recommend a corded drill. Cordless drills always seem to run out of power just when you need it most and or are never charged.

Might "Drill baby drill!" turn out to be a green energy plan after all?

Description : Might "Drill baby drill!" turn out to be a green energy plan after all?

Last Answer : I just saw this too – it’s good news. Drill, baby, drill indeed!

How do you drill a smooth round pit in wood?

Description : How do you drill a smooth round pit in wood?

Last Answer : You can get that with a drill bit.Look closely at the end of the bit and you will see.Pick one with a shallow profile and you will have your mini bowls/divots

What do hospitals do with patients in a psych ward when there's a fire drill?

Description : What do hospitals do with patients in a psych ward when there's a fire drill?

Last Answer : When I was in college, I worked at a private psych hospital. We had drills but it was an outside walk with patients no pressure for a drill. We just had a Senior Aide do a double check that ... and staff was used as a check list when we arrived at our outside area. That was over 40 years ago.

What do people in wheelchairs do when there's a fire or fire drill?

Description : What do people in wheelchairs do when there's a fire or fire drill?

Last Answer : answer:I've worked in several hotels, and the employees were trained to make a note of anyone checked in that is in a wheelchair. If it was a fire drill, we notified all of the guests and meeting room ... be proactive enough to put a plan in place. And if I used a wheelchair, I'd ask about it.

Can you skip drill or request off?

Description : Can you skip drill or request off?

Last Answer : It just depends on his unit. Most reserve units have something set up for the reservists to request permission to miss the drill and make it up at a later date. He just needs to talk whoever he normally reports to. The sooner he does it, the better. Some things they are not allowed to miss.

Do parents drill twins to be alike in every way or would it have developed that way anyhow?

Description : Do parents drill twins to be alike in every way or would it have developed that way anyhow?

Last Answer : Twins are actually genetically disposed to be similar to one another in a lot of aspects. In fact, twins that are reared apart in different enviroments still show very similar characteristics personality-wise, and in other ways as well.

Do you feel our government (America) allowed BP to drill without safety precautions to get campaign donations?

Description : Do you feel our government (America) allowed BP to drill without safety precautions to get campaign donations?

Last Answer : I think that the climate at the time the permit was granted was pro-business.

Who owns the rights to drill in the Gulf of Mexico?

Description : Who owns the rights to drill in the Gulf of Mexico?

Last Answer : There are 7 main areas of the Gulf of Mexico. The right to drill will depend on which area and proximity to its land mass.

Best way to drill a hole in a cowry and conical shell?

Description : Best way to drill a hole in a cowry and conical shell?

Last Answer : If you can’t do what you want to do with a Dremel and one of it’s many magical attachments, then I am already out of ideas. Sorry… but, have you tried using the Dremel on a very low speed? .

Does anyone know if Obama is allowing BP to drill relief wells to stop the Gulf oil spill?

Description : Does anyone know if Obama is allowing BP to drill relief wells to stop the Gulf oil spill?

Last Answer : Yes, two of them.

What is summer drill like for the Army Reserve?

Description : What is summer drill like for the Army Reserve?

Last Answer : My National Guard yearly training for two weeks was in Gulfport, Mississippi. it was daily pt and schooling, but the nights were free and we could take our wife or s/o and stay in a motel nearby. ... be the setup for you as the Army Reserve is a totally different branch of the military. good luck.

With the BP oil rig explosion and sinking do you believe Sarah Palin is still urging "Drill baby drill!"?

Description : With the BP oil rig explosion and sinking do you believe Sarah Palin is still urging "Drill baby drill!"?

Last Answer : Haven’t heard much from Palin lately.

Is it ever possible for Army drill to end as late as 10?

Description : Is it ever possible for Army drill to end as late as 10?

Last Answer : I’m just guessing here, but I would bet that it ends when the drill sargent says so!

Why would a dentist drill holes in my gums over my upper canines before pulling them when doing an immediate denture?

Description : Why would a dentist drill holes in my gums over my upper canines before pulling them when doing an immediate denture?

Last Answer : Sounds like you need a new dentist already!

I need to make an evil looking drill. Any ideas?

Description : I need to make an evil looking drill. Any ideas?

Last Answer : An antique hand auger would suit nicely. Here’s another nasty one. Or how about a corkscrew for removing corks?

How do Air Force Military Training Instructors compare to the other branches' drill sergeants?

Description : How do Air Force Military Training Instructors compare to the other branches' drill sergeants?

Last Answer : I enlisted in the Air National Guard, which is a branch of the Air Force. i was sent to Texas for boot camp. i cannot speak for the other branches of the military, but my boot camp was fairly ... di's were not friendly. you just have have to go along with the program. i made the right choice.

Is it possible to drill out an acrylic item (see details)

Description : Is it possible to drill out an acrylic item (see details)

Last Answer : Sure is, use a sharp bit and maybe instead of sleeving it, use a Tap…Also you may try using a rag to wrap it in and a vise to hold it, you should be able to do this by hand with out a machine or press, even though a press would be more ideal..

Do doctors really drill into a patient's head to relieve pressure?

Description : Do doctors really drill into a patient's head to relieve pressure?

Last Answer : Not so primitively.

What do you think about the top drill sergeant being female?

Description : What do you think about the top drill sergeant being female?

Last Answer : She must be a bad ass :-)

So why don't we just drill in Alaska?

Description : So why don't we just drill in Alaska?

Last Answer : answer:Well I've got a 2-parter for you. The US is looking to perform their drilling in the Arctic National Wildlife Refuge, and if they go ahead with the plan the environmental damage will be ... resources (renewable in particular). Earth Day is a good excuse to bring that to attention to everyone!

how do you drill plexiglass

Description : how do you drill plexiglass

Last Answer : Need Answer

An electric drill transfer some energy wastefully . aside from heat , what else carries the energy that is transferred wastefully?

Description : An electric drill transfer some energy wastefully . aside from heat , what else carries the energy that is transferred wastefully?

Last Answer : sound waves

Stem tailed drill seen in which plant ?

Description : Stem tailed drill seen in which plant ?

Last Answer : : Stem tailed drill is found in bone marrow plants.

What are the functions of drill flute ?

Description : What are the functions of drill flute ?

Last Answer : : The tasks of drill flute are- 1. Flutes help in forming cutting edge. 2. The cut helps to get the powder out. 3. The cut is crushed and crushed. 4. The cutting aid helps to reach the cutting edge.

What is the meaning of the word drill ?

Description : What is the meaning of the word drill ?

Last Answer : The word drill means practice.

what drill for aluminum

Description : I need to drill aluminum several times, but the iron drill bit sticks and burns. The hole is then of poor quality.

Last Answer : I recommend buying cobalt drills for aluminum. This makes drilling into aluminum completely easy. I used them at work and it's incomparable.

Unable to drill into panel

Description : I want to attach a bracket to the TV, but I can't drill a panel in one screw. The other holes are ok. How to drill a hole in the panel?

Last Answer : You hit a stone in the panel. It needs a hammer drill.

How deep is it to drill a well?

Description : Don't you know how deep a well drilling company can do it? Do you think more than 30 meters? We have a borehole in the garden where the water should be 30 meters but the water is not there. So if he can drill even deeper.

Last Answer : 30 m is "like nothing", wells are usually drilled 50-60, but they can be drilled a few hundred meters ... Expect a "problem" with the pump rather than something that could not be drilled.

Purchase of a new drill.

Description : I would like a drill for such home drilling (3 times a year drilling something). Should I buy at Obi or rather at a hardware store?

Last Answer : Wait until Lidla and buy Lion Parkside.

Is it possible to drill plasterboard?

Description : Will it make a normal hole or will it crumble?

Last Answer : It can be drilled without any problems.