Don't you know how deep a well drilling company can do it? Do you think more than 30 meters? We have a borehole in the garden where the water should be 30 meters but the water is not there. So if he can drill even deeper.

1 Answer

Answer :

30 m is "like nothing", wells are usually drilled 50-60, but they can be drilled a few hundred meters ... Expect a "problem" with the pump rather than something that could not be drilled.

Related questions

Description : A frog fell into a well 12 feet deep. He could jump 3 feet, but every time he jumped 3 feet, he fell back 2 feet. How many times did he have to jump to get out of the well? -Riddles

Last Answer : The tenth jump took him out. (On the tenth jump he reached 13 feet and was out.)

Description : Walking home one day, you take a short cut along the train tracks. The tracks cross a narrow bridge over a deep gorge. At the point you are 3/8 of the way across the bridge, you hear the train whistle ... run over as well. If you can run ten miles per hour, how fast is the train moving? -Riddles

Last Answer : The train is moving at 40 miles per hour. Imagine that a friend is walking with you. When the train whistle blows, you head away from the train, he heads toward it. When he reaches safety, you ... the bridge in the time you cross the remaining 1/4, the train must be moving four times your speed.

Description : Round as a button, Deep as a well. If you want me to talk, You must first pull my tail.What am I? -Riddles

Last Answer : A bell.

Description : I look flat, but I am deep, Hidden realms I shelter. Lives I take, but food I offer. At times I am beautiful. I can be calm, angry and turbulent. I have no heart, but offer pleasure as well as death. No man can own me, yet I encompass what all men must have. What am I? -Riddles

Last Answer : An ocean.

Description : The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Last Answer : Inner radius of circular well, r = 3.5/2m = 1.75m Depth of circular well, say h = 10m (i) Inner curved surface area = 2πrh = (2 (22/7 ) 1.75 10) = 110 Therefore, the inner curved surface ... area = Rs (110 40) = Rs.4400 Therefore, the cost of plastering the curved surface of the well is Rs. 4400.

Description : I look flat, but I am deep, Hidden realms I shelter. Lives I take, but food I offer. At times I am beautiful. I can be calm, angry and turbulent. I have no heart, but offer pleasure as well as death. No man can own me, yet I encompass what all men must have. -Riddles

Last Answer : answer is ocean

Description : The inner diameter of a circular well is 3.5 m. It is 10 m deep. Find -Maths 9th

Last Answer : Radius of well = (r) = 3.5/2 m Depth of well = (h) = 10 m (i) Inner curved surface area of well = 2 πrh = 2 x 22/7 x 3.5/2 x 10 = 110 m2 (ii) Cost of plastering 1 m2 = ₹ 40 ∴ Cost of plastering 110 m2 = ₹110 X 40 = ₹4400

Description : Hello, we are starting the reconstruction of the house and we are still looking for the best way to heat. Does anyone have experience with a ground-to-water heat pump? Is the initial investment worthwhile? Isn't it noisy? Doesn't it cause any vibrations, for example? Thank you.

Last Answer : I don't have a personal. The neighbor has it, combined with solar panels and can not praise it. Although the initial investment is relatively large, they claim that the return will be about 5 ... year as it consumes a year. The advantage is that it sells electricity more expensive than it buys.

Description : Sally has a pet snail that fell into a well. the well is 16 feet deep. each day, the snail climbs up 5 feet but each night it slides down 4 feet. how many days will it take sallys snail to get to the top of the well?

Last Answer : 16 days

Description : The well through which water comes out through hydraulic pressure is called – (1) Ordinary well (2) Tube well (3) Deep tube well (4) Artesian well

Last Answer : (4) Artesian well Explanation: Artesian Well refers to a type of well that normally gives a continuous flow, the water being forced upwards by hydraulic pressure.

Description : The maximum non-verticality of the bore of a well 200 m deep, may be permitted up to (A) 25 cm (B) 50 cm (C) 75 cm (D) 100 cm

Last Answer : (D) 100 cm

Description : The depth of the water table at a place is 45 m below the general ground level. To lift water from a  deep tube well in such a locality, the type of pump to be installed is  (A) Centrifugal pump  (B) Reciprocating pump  (C) Deep well turbine pump  (D) None of these 

Last Answer : (C) Deep well turbine pump

Description : The most suitable method for drainage of fine grained cohesive soils is (A) Well point system (B) Vacuum method (C) Deep well system (D) Electro-osmosis method

Last Answer : Answer: Option D

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

Description : Which popular dramatist is known for such works as The Winslow Boy, The Browning Version, The Deep Blue Sea and Separate Tables? He said that he wrote his plays to please a symbolic ... class who had conventional tastes; his critics frequently used this character as the basis for belittling him.

Last Answer : Terence Rattigan.

Description : The well through which water comes out through hydraulic pressure is called (1) Ordinary well (2) Tube well (3) Deep tube well (4) Artesian well

Last Answer : Artesian well

Description : Do you have a checklist or drill for getting on board with a new computer?

Last Answer : No need to follow routine or anything. Laptops generally comes with OS and all the necessary programs pre installed. So you just need to backup/transfer your personal/work files into the new system. That ... where you left off. You can also remove the hard drive of the old laptop for save keeping.

Description : Are drill sergeants trying to get one to stand up for yourselves or trying to break one down and submit?

Last Answer : Pretty much they want everyone to do exactly as they’re told, and also to work closely as a team. Lots of times that will require some breaking down because most people show up in the military pretty stuck on themselves.

Description : Without a drill press, what is a trick for drilling a truly vertical hole in board?

Last Answer : Stand a bubble level near the place-of-drillage, and rest the dorsal edge of the drill against the long edge of the level. Ask a friend to hold the level, if necessary.

Description : How can I avoid taking a drill to three oil pans?

Last Answer : Buy some big oil drip pans, fill with cat litter and place under the leaking engines. Gaskets are a thing but the leaks might be (probably are) valve covers. Put a friendly note on the windshields informing owners that ... for him to just dump 2 to 3 quarts of oil into it each day. (WHAT a mess!!)

Description : Are there any drill team parents on Fluther, and do you have any tips for me?

Last Answer : Don’t let her use live ammo.

Description : I am wanting to buy a cordless drill. Can you explain the differences to me?

Last Answer : Battery life and power will be greater the higher the voltage. Personally I would recommend a corded drill. Cordless drills always seem to run out of power just when you need it most and or are never charged.

Description : Might "Drill baby drill!" turn out to be a green energy plan after all?

Last Answer : I just saw this too – it’s good news. Drill, baby, drill indeed!

Description : How do you drill a smooth round pit in wood?

Last Answer : You can get that with a drill bit.Look closely at the end of the bit and you will see.Pick one with a shallow profile and you will have your mini bowls/divots

Description : What do hospitals do with patients in a psych ward when there's a fire drill?

Last Answer : When I was in college, I worked at a private psych hospital. We had drills but it was an outside walk with patients no pressure for a drill. We just had a Senior Aide do a double check that ... and staff was used as a check list when we arrived at our outside area. That was over 40 years ago.

Description : What kind of drill bit should I use?

Last Answer : You will want to you a masonry bit. Depending on the hardness of the rock, you may need to use a hammer drill to drill into the rock.

Description : What do people in wheelchairs do when there's a fire or fire drill?

Last Answer : answer:I've worked in several hotels, and the employees were trained to make a note of anyone checked in that is in a wheelchair. If it was a fire drill, we notified all of the guests and meeting room ... be proactive enough to put a plan in place. And if I used a wheelchair, I'd ask about it.

Description : Can you skip drill or request off?

Last Answer : It just depends on his unit. Most reserve units have something set up for the reservists to request permission to miss the drill and make it up at a later date. He just needs to talk whoever he normally reports to. The sooner he does it, the better. Some things they are not allowed to miss.

Description : Do parents drill twins to be alike in every way or would it have developed that way anyhow?

Last Answer : Twins are actually genetically disposed to be similar to one another in a lot of aspects. In fact, twins that are reared apart in different enviroments still show very similar characteristics personality-wise, and in other ways as well.

Description : Do you feel our government (America) allowed BP to drill without safety precautions to get campaign donations?

Last Answer : I think that the climate at the time the permit was granted was pro-business.

Description : Who owns the rights to drill in the Gulf of Mexico?

Last Answer : There are 7 main areas of the Gulf of Mexico. The right to drill will depend on which area and proximity to its land mass.

Description : Best way to drill a hole in a cowry and conical shell?

Last Answer : If you can’t do what you want to do with a Dremel and one of it’s many magical attachments, then I am already out of ideas. Sorry… but, have you tried using the Dremel on a very low speed? .

Description : Does anyone know if Obama is allowing BP to drill relief wells to stop the Gulf oil spill?

Last Answer : Yes, two of them.

Description : What is summer drill like for the Army Reserve?

Last Answer : My National Guard yearly training for two weeks was in Gulfport, Mississippi. it was daily pt and schooling, but the nights were free and we could take our wife or s/o and stay in a motel nearby. ... be the setup for you as the Army Reserve is a totally different branch of the military. good luck.

Description : With the BP oil rig explosion and sinking do you believe Sarah Palin is still urging "Drill baby drill!"?

Last Answer : Haven’t heard much from Palin lately.

Description : Is it ever possible for Army drill to end as late as 10?

Last Answer : I’m just guessing here, but I would bet that it ends when the drill sargent says so!

Description : Why would a dentist drill holes in my gums over my upper canines before pulling them when doing an immediate denture?

Last Answer : Sounds like you need a new dentist already!

Description : I need to make an evil looking drill. Any ideas?

Last Answer : An antique hand auger would suit nicely. Here’s another nasty one. Or how about a corkscrew for removing corks?

Description : How do Air Force Military Training Instructors compare to the other branches' drill sergeants?

Last Answer : I enlisted in the Air National Guard, which is a branch of the Air Force. i was sent to Texas for boot camp. i cannot speak for the other branches of the military, but my boot camp was fairly ... di's were not friendly. you just have have to go along with the program. i made the right choice.

Description : Is it possible to drill out an acrylic item (see details)

Last Answer : Sure is, use a sharp bit and maybe instead of sleeving it, use a Tap…Also you may try using a rag to wrap it in and a vise to hold it, you should be able to do this by hand with out a machine or press, even though a press would be more ideal..

Description : Do doctors really drill into a patient's head to relieve pressure?

Last Answer : Not so primitively.

Description : What do you think about the top drill sergeant being female?

Last Answer : She must be a bad ass :-)

Description : My Ryobi drill has a bit stuck in the chuck and it wont come loose, what do i do?

Last Answer : You can get the entire chuck off by holding the motor. The easiest way to do this is jam something into the cooling vanes. After that, just turn the entire chuck CCW. You should be able to get this ... and let it penetrate. It will probably loosen up to where you don't have to do anything drastic.

Description : So why don't we just drill in Alaska?

Last Answer : answer:Well I've got a 2-parter for you. The US is looking to perform their drilling in the Arctic National Wildlife Refuge, and if they go ahead with the plan the environmental damage will be ... resources (renewable in particular). Earth Day is a good excuse to bring that to attention to everyone!

Description : how do you drill plexiglass

Last Answer : Need Answer

Description : An electric drill transfer some energy wastefully . aside from heat , what else carries the energy that is transferred wastefully?

Last Answer : sound waves

Description : Stem tailed drill seen in which plant ?

Last Answer : : Stem tailed drill is found in bone marrow plants.

Description : What are the functions of drill flute ?

Last Answer : : The tasks of drill flute are- 1. Flutes help in forming cutting edge. 2. The cut helps to get the powder out. 3. The cut is crushed and crushed. 4. The cutting aid helps to reach the cutting edge.

Description : What is the meaning of the word drill ?

Last Answer : The word drill means practice.

Description : I need to drill aluminum several times, but the iron drill bit sticks and burns. The hole is then of poor quality.

Last Answer : I recommend buying cobalt drills for aluminum. This makes drilling into aluminum completely easy. I used them at work and it's incomparable.