What is a low grade fever?

What is a low grade fever?
by

1 Answer

Answer :

Here in the UK a temperature is measured in Centigrade, the normal being 37*c. If the temp goes from this, up to 37.5*c then this would be classed as a low grade fever. If it reached 40*c then this would be considered to be severe. Hope this helps.
by
selected by

Related questions

Is 37.4 considered a low-grade fever?

Description : Is 37.4 considered a low-grade fever?

Last Answer : answer:Yes. It is a mild fever, but how did you take it? How old is your daughter? It would be a mild fever if taken orally; normal if taken rectally. A high fever if taken under the armpit.

Should I take my baby to the ER if she has a low-grade fever?

Description : Should I take my baby to the ER if she has a low-grade fever?

Last Answer : If you are worried, check with the child's pediatrician. If the baby is less than 2 months old, any fever is dangerous--even if low grade. Most likely it is just a virus, but you should always check with the doctor.

A patient receiving a class I antiarrhythmic agent on a chronic basis complains of fatigue, low-grade fever, and joint pain suggestive of systemic lupus erythematosus (SLE). The patient is most likely receiving (a) Lidocaine (b) Procainamide (c) Quinidine (d) Flecainide (e) Propranolol

Description : A patient receiving a class I antiarrhythmic agent on a chronic basis complains of fatigue, low-grade fever, and joint pain suggestive of systemic lupus erythematosus (SLE). The patient is most likely receiving (a) Lidocaine (b) Procainamide (c) Quinidine (d) Flecainide (e) Propranolol

Last Answer : Ans: B

A man has an Escherichia coli bacteremia with a low-grade fever (101.6°F). Appropriate management of his fever would be (a) Give acetaminophen 650 mg orally every 4 hours (b) Give aspirin 650 mg orally every 4 hours (c) Give alternating doses of aspirin and acetaminophen every 4 hours (d) Withhold antipyretics, and use the fever curve to monitor his response to antibiotic therapy (e) Use tepid water baths to reduce the fever

Description : A man has an Escherichia coli bacteremia with a low-grade fever (101.6°F). Appropriate management of his fever would be (a) Give acetaminophen 650 mg orally every 4 hours (b) Give aspirin 650 ... fever curve to monitor his response to antibiotic therapy (e) Use tepid water baths to reduce the fever

Last Answer : Ans: D

-pt with pict of bilateral pneumonia , high grade fever , normal WBC . organism causing that: - Chlamydia pneumonae - Leigonella sp. (cause neutropenia) - Staph pneumonae _____________________

Description : -pt with pict of bilateral pneumonia , high grade fever , normal WBC . organism causing that: - Chlamydia pneumonae - Leigonella sp. (cause neutropenia) - Staph pneumonae _____________________

Last Answer : Chlamydia pneumonae

Why does a 82 year old man have low blood pressure and a fever?

Description : Why does a 82 year old man have low blood pressure and a fever?

Last Answer : If you have a fever you should see a doctor to find out what'swrong.

Why does a 82 year old man have low blood pressure and a fever?

Description : Why does a 82 year old man have low blood pressure and a fever?

Last Answer : If you have a fever you should see a doctor to find out what'swrong.

The Rickettsias demonstrate a characteristic ______ and ______. a. Fever And Chills b. Fever And Rash c. Fever And Difficulty Breathing d. Chills And Low White Blood Cells.

Description : The Rickettsias demonstrate a characteristic ______ and ______. a. Fever And Chills b. Fever And Rash c. Fever And Difficulty Breathing d. Chills And Low White Blood Cells.

Last Answer : b. Fever And Rash

Which is a low grade brown coal? Mention one feature of it? -SST 10th

Description : Which is a low grade brown coal? Mention one feature of it? -SST 10th

Last Answer : Lignite is a low grade brown coal.

How is the low grade iron ore utilized? -SST 10th

Description : How is the low grade iron ore utilized? -SST 10th

Last Answer : The inferior Variety is often used in manufacturing sponge iron and converted into pellets and than exported.

The most suitable method for extraction of copper from low grade sulphide ore is

Description : The most suitable method for extraction of copper from low grade sulphide ore is

Last Answer : The most suitable method for extraction of copper from low grade sulphide ore is A. Smelting ... process C. Leaching process D. Electrolytic process

A commutator's protective oxide film can be destroyed by _________________. A. periods of low humidity B. very low brush current density C. improper brush grade D. all of the above

Description : A commutator's protective oxide film can be destroyed by _________________. A. periods of low humidity B. very low brush current density C. improper brush grade D. all of the above

Last Answer : Answer: D

At a site, low grade copper ores are available and zinc and iron seraps are also available. Which of the two seraps will be more suitable for reducing the leached copper ore and why ?

Description : At a site, low grade copper ores are available and zinc and iron seraps are also available. Which of the two seraps will be more suitable for reducing the leached copper ore and why ?

Last Answer : Ans. : The E0 value for the redox couple Zn2+/ Zn(-0.76V) is more negative than that of Fe2+/ Fe(- 0.44) redox couple. Therefore, Zinc is more reactive than iron and hence reduction will ... Zinc seraps are used, But Zinc is a costier metal than iron so using iron scraps would be more economical.

As a new project manager, Karen was worried about a statement from her client: “your project deliverable is in low quality with low grade”. According to PMBOK, how can you help Karen distinguish the differences between “quality” and “grade”? Select one: a. Quality and grade represent the same thing. b. Low quality can never be a problem, but low grade is. c. Low quality represents a true problem, but low grade might not be the case. d. Low quality with high grade is always desirable to your client. e. High quality always represents high grade.

Description : As a new project manager, Karen was worried about a statement from  her client: your project deliverable is in low quality with low grade .  According to PMBOK, how can you help Karen ... quality with high grade is always desirable to your client. e. High quality always  represents high grade.

Last Answer : c. Low quality represents a true problem, but low grade might not be the case.

Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Description : Which of the following is not applicable to fluidised bed combustion of coal? (A) It cannot burn low grade coal (B) It achieves higher fuel combustion efficiency (C) Less heat transfer surface area is required in boilers (D) None of these

Last Answer : (A) It cannot burn low grade coal

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Low grade coal is __________ to produce ammonia synthesis gas. (A) Hydrogenated (B) Liquefied (C) Gasified (D) Dehydrogenated

Description : Low grade coal is __________ to produce ammonia synthesis gas. (A) Hydrogenated (B) Liquefied (C) Gasified (D) Dehydrogenated

Last Answer : (C) Gasified

Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Last Answer : (A) Of the better CaO/SiO2 balance for slag formation

Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl(D) Both (B) and (C)

Description : Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Cutter bar is made up of which material a) High grade steel. b) Low carbon alloy steel. c) Platinum. d) High speed tool steel

Description : Cutter bar is made up of which material a) High grade steel. b) Low carbon alloy steel. c) Platinum. d) High speed tool steel

Last Answer : High grade steel

What are some good uses of low-grade steam at 12 atm and 1920C?

Description : What are some good uses of low-grade steam at 12 atm and 1920C?

Last Answer : There are various traditional methods to employ waste steam in an operating plant: 1. You can generate electricity through a steam turbine-generator set. The electricity is usually put back in the line; ... that you can use the steam for environmental heating (if you live in a cold climate).

Which of the following is false? a) electricity is high-grade energy b) high grade forms of energy are highly ordered and compact c) low grade energy is better used for applications like melting of metals rather than heating water for bath

Description : Which of the following is false? a) electricity is high-grade energy b) high grade forms of energy are highly ordered and compact c) low grade energy is better used for applications like melting of metals rather than heating water for bath

Last Answer : c) low grade energy is better used for applications like melting of metals rather than heating water for bath

In present time the Seminars are organised Options: A) For promoting the teachers B) For revamping teachers with research potentialities C) For converting low grade teaches into higher grades D) None of the above

Description :  In present time the Seminars are organised Options: A) For promoting the teachers B) For revamping teachers with research potentialities C) For converting low grade teaches into higher grades D) None of the above

Last Answer : B) For revamping teachers with research potentialities