Polyester Vs Cotton Underwear – Which Is Better?

Polyester Vs Cotton Underwear – Which Is Better?
by

1 Answer

Answer :

Polyester If you are looking for the best men’s underwear but are confused about the fabric, you certainly need to know the benefits offered by polyester. Though polyester is a synthetic fabric, it is quite popular as it can easily withstand even the toughest athletic movements without causing any trouble or irritation to your sensitive areas. The fabric is stretchable and thus, the inner wear too moves along with your body movements without causing any obstruction. Also, underwear made of polyester keeps you dry as it absorbs the moisture and sweat. But, unlike cotton, polyester underwear remains dry, thus keeping you fresh and comfortable. As the moisture is kept away, you need not worry about foul smell or fungus or any other embarrassing concerns. You might now be wondering if there
by
selected by

Related questions

WHAT IS BETTER FOR QUILTING COTTON OR POLYESTER /COTTON BLENDS?

Description : WHAT IS BETTER FOR QUILTING COTTON OR POLYESTER /COTTON BLENDS?

Last Answer : Cotton is a good choice for quilting. It offers durability and is easy to maintain. Stains are easily removed as well and the material is ever so soft.

How does one get nail polish out of cotton/polyester/spandex pants?

Description : How does one get nail polish out of cotton/polyester/spandex pants?

Last Answer : answer:Normally I would say I scrape off as much as possible and then dab it with nail polish remover to get any remaining little bits off. I wouldn't recommend scrubbing with nail polish remover because you ... fix the original color). Since you washed it, I don't know if that would work though.

The substance that is least prone to catch and spread fire is (a) nylon (b) terycot (c) cotton (d) polyester

Description : The substance that is least prone to catch and spread fire is (a) nylon (b) terycot (c) cotton (d) polyester

Last Answer : Ans:(c)

In bag filters, filter fabrics are never made of (A) Metallic wire woven mesh (B) Polyester fibres (C) Cotton fibres (D) Nylon fibres

Description : In bag filters, filter fabrics are never made of (A) Metallic wire woven mesh (B) Polyester fibres (C) Cotton fibres (D) Nylon fibres

Last Answer : (A) Metallic wire woven mesh

Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Description : Example of natural plant fibre: a. Silk b. Cotton c. Viscose rayon d. Polyester

Last Answer : b. Cotton

The fiber least prone to catch fire is (1) nylon (2) polyester (3) cotton (4) terylene

Description : The fiber least prone to catch fire is (1) nylon (2) polyester (3) cotton (4) terylene

Last Answer : cotton

Is it better to mate suede with polyester, or Latex with velvet?

Description : Is it better to mate suede with polyester, or Latex with velvet?

Last Answer : It would depend on what kind of litter you wanted.

In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational – Material – Size – Shape b.Material – Rotational or non rotational – Size – Shape c.Size – Rotational or non rotational – Material – Shape d.Shape – Rotational or non rotational – Material – Size

Description : In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational †Material †Size †Shape b.Material †Rotational or non ... non rotational †Material †Shape d.Shape †Rotational or non rotational †Material †Size

Last Answer : a.Rotational or non rotational – Material – Size – Shape

In STL files Euler’s rule for solids can be written as a.No. of faces – No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces – No. of edges + No. of vertices = No. of bodies c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies d.No. of faces – No. of edges + No. of vertices = 4 x No. of bodies

Description : In STL files Euler’s rule for solids can be written as a.No. of faces †No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces †No. of edges + No. of vertices = No. of bodies c.No. of ... = 2 x No. of bodies d.No. of faces †No. of edges + No. of vertices = 4 x No. of bodies

Last Answer : c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies

Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above

Description : Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above

Last Answer : c.Machine control unit

……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Description : ……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : b.machine Zero Point

In CNC programming …….. is commonly used canned cycle for Stock removal cycle a.G71 b.G72 c.G73 d.G74

Description : In CNC programming …….. is commonly used canned cycle for Stock removal cycle a.G71 b.G72 c.G73 d.G74

Last Answer : d.G74

Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Description : Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Last Answer : c.Canned Cycle

……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Description : ……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Last Answer : b.Macro

Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Description : Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Last Answer : b.Parallel

In a CNC program block, N05 GO1 G91 G33 X20 Z-40 K5……, K refer to a.Depth of cut b.Pitch c.Multiple Threading Cycle d.Feed

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40 K5……, K refer to a.Depth of cut b.Pitch c.Multiple Threading Cycle d.Feed

Last Answer : b.Pitch

In CNC Program M98 is refer to…… a.CANCEL Subroutine b.Call Sub-Program c.Call Subroutine d.CANCEL Sub-Program

Description : In CNC Program M98 is refer to…… a.CANCEL Subroutine b.Call Sub-Program c.Call Subroutine d.CANCEL Sub-Program

Last Answer : b.Call Sub-Program

In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Description : In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Last Answer : a.Spindle ON in Clockwise rotation

In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Last Answer : c.Thread Cutting

Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Description : Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Last Answer : a.Words

……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Description : ……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Last Answer : d.Block

he linking of computer with a communication system is called……….. a.networking b.pairing c.interlocking d.assembling

Description : he linking of computer with a communication system is called……….. a.networking b.pairing c.interlocking d.assembling

Last Answer : a.networking

Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Description : Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Last Answer : c.c-axis

In a CNC program block, N02 GO2 G91 X40 Z40……, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular interpolation in counter clockwise direction and absolute dimension c.circular interpolation in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Description : In a CNC program block, N02 GO2 G91 X40 Z40††, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular ... in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Last Answer : c.circular interpolation in clockwise direction and incremental dimension

During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Description : During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Last Answer : a.circular Interpolation – clockwise

Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Last Answer : c.truss element

To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following? a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following? a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Last Answer : b.Hermite Cubic Spline Curve

To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Last Answer : b.Hermite Cubic Spline Curve

An area on a display device to which a window is mapped is called a…………. a.Window b.Viewpoint c.Pixel d.None of the above

Description : An area on a display device to which a window is mapped is called a…………. a.Window b.Viewpoint c.Pixel d.None of the above

Last Answer : b.Viewpoint

The polygons are scaled by applying the following transformation. a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy) b.X’=x * Sx + Xf(1+Sx) & Y’=y * Sy + Yf(1+Sy c.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy – Yf(1-Sy) d.X’=x * Sx * Xf(1-Sx) & Y’=y * Sy * Yf(1-Sy)

Description : The polygons are scaled by applying the following transformation. a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy) b.X’=x * Sx + Xf(1+Sx) & Y’=y * Sy + Yf(1+Sy c.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy – Yf(1-Sy) d.X’=x * Sx * Xf(1-Sx) & Y’=y * Sy * Yf(1-Sy)

Last Answer : a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy)

If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Description : If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Last Answer : b.Uniform scaling is produced

We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Description : We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Last Answer : b.Fixed point

ADT Burglar Alarms For House Security – A Brief Guide ?

Description : ADT Burglar Alarms For House Security – A Brief Guide ?

Last Answer : House security is one of the first things you need to take care of when it comes to making contingency plans for the future. Good burglar alarms are a necessity nowadays, with rising crime rates. ... doing things right. For more details about ADT please log on to http://www.firsthomesecurity.co.uk

Estimate by rounding to the nearest ten.​ Then, find the sum.221122plus+33554455​_​_The estimated sum is nothing.?

Description : Estimate by rounding to the nearest ten.​ Then, find the sum.221122plus+33554455​_​_The estimated sum is nothing.?

Last Answer : Estimate by rounding to the nearest ten.​ Then, find the sum.221122plus+33554455​_​_The estimated sum is nothing.

Which set of ordered pairs represents a vertical reflection (over the x-axis) A. (5, –1) to (–5, –1) B. (–2, –3) to (–2, 3) C. (–1, –5) to (1, 5) D. (3, –2) to (–3, –2)?

Description : Which set of ordered pairs represents a vertical reflection (over the x-axis) A. (5, –1) to (–5, –1) B. (–2, –3) to (–2, 3) C. (–1, –5) to (1, 5) D. (3, –2) to (–3, –2)?

Last Answer : help me plz

A balloon that contains 0.75 L of a gas at 25°C is cooled to –100°C. Calculate the new volume of the balloon.?

Description : A balloon that contains 0.75 L of a gas at 25°C is cooled to –100°C. Calculate the new volume of the balloon.?

Last Answer : dlId0

1 2​·16(40+24)​?

Description : 1 2​·16(40+24)​?

Last Answer : The answer is 512

–7 + 8x2 – 4x?

Description : –7 + 8x2 – 4x?

Last Answer : 8x

What is the missing number of ​( ​___+​7)+​(2x-​6)=-4x+1?

Description : What is the missing number of ​( ​___+​7)+​(2x-​6)=-4x+1?

Last Answer : 2x

What equation is equivalent to 3[x + 3(4x – 5)] = 15x – 24?

Description : What equation is equivalent to 3[x + 3(4x – 5)] = 15x – 24?

Last Answer : 39x - 45 = 15x - 24

What are the zeros of f(x) = (x – 1)(x 6) Select all that apply: A. x = –6 B. x = 6 C. x = 1 D. x = –1?

Description : What are the zeros of f(x) = (x – 1)(x 6) Select all that apply: A. x = –6 B. x = 6 C. x = 1 D. x = –1?

Last Answer : x=-6, x=1

…?

Description : …?

Last Answer : …

What does '…' mean in a text message?

Description : What does '…' mean in a text message?

Last Answer : ROFL or ROTFL means "rolling on the floor laughing."

How many stores do you shop in where you can buy underwear, bicycles, and fresh celery? and pay for them all in a single transaction?

Description : How many stores do you shop in where you can buy underwear, bicycles, and fresh celery? and pay for them all in a single transaction?

Last Answer : Target. I was just there ten minutes ago buying butter, a welcome matt, aluminum foil, and a dog toy. I have no problem with them so long as they carry quality stuff.

Are you supposed to wear normal underwear under thermal underwear? Or are they underwear?

Description : Are you supposed to wear normal underwear under thermal underwear? Or are they underwear?

Last Answer : Wear regular underwear under the thermals. Thermals are called “underwear” because one wears them under shirts and pants.

What is the longest you could wear underwear, before you felt uncomfortable?

Description : What is the longest you could wear underwear, before you felt uncomfortable?

Last Answer : I’ve not been in the shit like you have by any means and I don’t pretend to understand what you went through. I can say, though that I’m good for about 48 hours backpacking before I change and wash the other pair in the stream.

What are the dangers of wearing wet underwear?

Description : What are the dangers of wearing wet underwear?

Last Answer : answer:No, it won't damage your testicles, and it won't hurt unless extremely cold. I wore river rafting shorts with a mesh liner during daylight for three days in Hawaii, jumping into the water (both salt and ... efficiently when worn. If it is damp at 10 a.m., it will still be damp at dinner time.

Ladies: Have you tried boy shorts underwear?

Description : Ladies: Have you tried boy shorts underwear?

Last Answer : I find they tend to become too loose as the day goes by. It’s really uncomfortable to have your knickers shifting around all over the place under your clothes.

Men: if you look at a woman's ass do you always know what type of underwear she has on?

Description : Men: if you look at a woman's ass do you always know what type of underwear she has on?

Last Answer : answer:Nomenclature question - what is Spanx? Never heard of it. I'm male. I do not go out of my way to look, nor do I tend to notice what sort of underwear a woman has. About the only way I ever ... I notice if women are braless or not-- that's a whole different story. I'm fairly good at that :-)

Can you help me understand why talking about underwear seems to make some people uncomfortable?

Description : Can you help me understand why talking about underwear seems to make some people uncomfortable?

Last Answer : Is she from the States or not? Cause the only thing I can think in your description is you made yourself look cooler than her because you are more traveled.