A balloon that contains 0.75 L of a gas at 25°C is cooled to –100°C. Calculate the new volume of the balloon.?

A balloon that contains 0.75 L of a gas at 25°C is cooled to –100°C. Calculate the new volume of the balloon.?
by

1 Answer

Answer :

dlId0
by
selected by

Related questions

What would happen if the air inside a hot air balloon cooled down?

Description : What would happen if the air inside a hot air balloon cooled down?

Last Answer : What is the answer ?

Nitrogen gas is filled in a container of volume 2.32 L at 32°C and 4.7 atm pressure. Calculate the number of moles of the gas.

Description : Nitrogen gas is filled in a container of volume 2.32 L at 32°C and 4.7 atm pressure. Calculate the number of moles of the gas.

Last Answer : Nitrogen gas is filled in a container of volume 2.32 L at 32°C and 4.7 atm pressure. Calculate the number of moles of the gas.

A balloon is inflated with helium gas at room temperature of 25 °C and at 1 bar pressure when its initial volume is 2.27L and allowed to rise in air.

Description : A balloon is inflated with helium gas at room temperature of 25 °C and at 1 bar pressure when its initial volume is 2.27L and allowed to rise in air.

Last Answer : A balloon is inflated with helium gas at room temperature of 25 °C and at 1 bar pressure when ... at which volume of the balloon can stay inflated ?

A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C. 2.54 kg  D. 3.16 kg Formula: from the steam table at 600kPa vƒ = 0.001101 m^3 / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Description : A vessel with a volume of cubic meter contains liquid water and water vapor ion equilibrium at 600 kPa. The liquid water has mass of1kg. Using the steam table, calculate the mass of the water vapor.  A. 0.99kg  B. 1.57 kg  C ... / kg vg = 0.3157 m^3 / kg Vtot = mƒ vƒ + mg vg mg = (tot-mƒ vƒ) / vg

Last Answer : 3.16 kg

The gas in a constant gas thermometer cooled to absolute zero would have _________.  a. no volume  b. no pressure  c. zero temperature at all scales  d. none of the above

Description : The gas in a constant gas thermometer cooled to absolute zero would have _________.  a. no volume  b. no pressure  c. zero temperature at all scales  d. none of the above

Last Answer : no pressure

Ten cu ft. of air at 300 psia 400°F is cooled to 140°F at constant volume. What is the final pressure? (formula: p2 = p1T2/T1)  a. 0  b. 209 psia  c. - 420 psia  d. None of the above

Description : Ten cu ft. of air at 300 psia 400°F is cooled to 140°F at constant volume. What is the final pressure? (formula: p2 = p1T2/T1)  a. 0  b. 209 psia  c. - 420 psia  d. None of the above

Last Answer : 209 psia

What would be the heart rate of a person if the cardiac output is 5 L, blood volume in the ventricles at the end of diastole is 100 mL and at the end of ventricular systole is 50 mL ? (a) 125 beats per minute (b) 50 beats per minute (c) 75 beats per minute (d) 100 beats per minute

Description : What would be the heart rate of a person if the cardiac output is 5 L, blood volume in the ventricles at the end of diastole is 100 mL and at the end of ventricular systole is 50 mL ? (a) 125 beats per minute (b) 50 beats per minute (c) 75 beats per minute (d) 100 beats per minute

Last Answer : (d) 100 beats per minute

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

A balloon, which always remains spherical, has a variable diameter `3/2(2x+1)`.Find the rate of change of its volume with respect to x.

Description : A balloon, which always remains spherical, has a variable diameter `3/2(2x+1)`.Find the rate of change of its volume with respect to x.

Last Answer : A balloon, which always remains spherical, has a variable diameter `3/2(2x+1)`.Find the rate of change of its volume ... (2)` D. `8/3 pi (2x+1)^(2)`

The surface of a spharical balloon is increase of its volume when its radius is 6 cm.

Description : The surface of a spharical balloon is increase of its volume when its radius is 6 cm.

Last Answer : The surface of a spharical balloon is increase of its volume when its radius is 6 cm.

The volume of a spherical balloon is increasing at a rate of ` 25 cm^(3)//sec`. Find the rate of increase of its curved surface when the radius of bal

Description : The volume of a spherical balloon is increasing at a rate of ` 25 cm^(3)//sec`. Find the rate of increase of its curved surface when the radius of bal

Last Answer : The volume of a spherical balloon is increasing at a rate of ` 25 cm^(3)//sec`. Find the ... its curved surface when the radius of balloon is 5 cm.

A hot air balloon has a volume of 2800 m^3 at 99°C. What is the volume if the air cools to 80°C?

Description : A hot air balloon has a volume of 2800 m^3 at 99°C. What is the volume if the air cools to 80°C?

Last Answer : A hot air balloon has a volume of 2800 m3 at 99°C. What is the volume if the air cools to 80°C?

When we inflated a balloon the volume and pressure increases . does it violate the Boyle's law . explain?

Description : When we inflated a balloon the volume and pressure increases . does it violate the Boyle's law . explain?

Last Answer : No, this doesn't because P1V1 is a constant, which I think meansit needs to have the same quantity of gas, which blowing a balloonisn't. Boyle's law is only used when a fixed amount of gas is beingcompressed or uncompressed, changing only its volume andpressure.

When we inflated a balloon the volume and pressure increases . does it violate the boyles law . explain?

Description : When we inflated a balloon the volume and pressure increases . does it violate the boyles law . explain?

Last Answer : No, this doesn't because P1V1 is a constant, which I think meansit needs to have the same quantity of gas, which blowing a balloonisn't. Boyle's law is only used when a fixed amount of gas is beingcompressed or uncompressed, changing only its volume andpressure.

If you started with 100 grams of each of the materials below and they all vaporized inside of an inflatable balloon, which of them would produce the largest volume balloon, assuming they were all at the same temperature? w) water x) gasoline y) ethanol z) butane

Description : If you started with 100 grams of each of the materials below and they all vaporized inside of an inflatable balloon, which of them would produce the largest volume balloon, assuming they were all at the same temperature? w) water x) gasoline y) ethanol z) butane 

Last Answer : ANSWER: W -- WATER 

During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Description : During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Last Answer : a.circular Interpolation – clockwise

What happens when water is cooled from 8°C to 0°C? 1. Its volume decreases uniformly, becoming minimum at 0°C. 2. Its density increases uniformly, attaining maximum value at 0°C. 3. Its volume decreases up to 4°C and then increases 4. Its density increases up to 4°C and then decreases. Which of the above answers is/are correct? (a) Only 1 (b) Only 2 (c) 3 and 4 (d) 1 and 2

Description : What happens when water is cooled from 8°C to 0°C? 1. Its volume decreases uniformly, becoming minimum at 0°C. 2. Its density increases uniformly, attaining maximum value at 0°C. 3. Its volume decreases up to 4°C and then increases ... is/are correct? (a) Only 1 (b) Only 2 (c) 3 and 4 (d) 1 and 2

Last Answer : Ans:(c)

When vapour is cooled at constant total system volume, the _______ changes. A Volume. B PRESSURE C Temperature. D None of the mentioned.

Description : When vapour is cooled at constant total system volume, the _______ changes. A Volume. B PRESSURE C Temperature. D None of the mentioned.

Last Answer : B PRESSURE

When vapour is cooled at constant total system volume, the _______ changes. A] Volume. B] Pressure C] Temperature. D] None of the mentioned

Description : When vapour is cooled at constant total system volume, the _______ changes. A] Volume. B] Pressure C] Temperature. D] None of the mentioned

Last Answer : B] Pressure

Ten cu. ft of air at 300psia and 400°F is cooled to 140°F at constant volume. What is the transferred heat?  a.-120Btu  b. -220Btu  c.-320Btu  d. -420Btu formula: Q= mcv(T2-T1)

Description : Ten cu. ft of air at 300psia and 400°F is cooled to 140°F at constant volume. What is the transferred heat?  a.-120Btu  b. -220Btu  c.-320Btu  d. -420Btu formula: Q= mcv(T2-T1)

Last Answer : -420Btu

What is the volume in liters of 0.75 mol of methane gas (CH4)?

Description : What is the volume in liters of 0.75 mol of methane gas (CH4)?

Last Answer : The volume is 17 L.

In an isothermal process on an ideal gas, the pressure increases by 0.5 percent. The volume decreases by about __________ percent. (A) 0.25 (B) 0.5 (C) 0.75 (D) 1

Description : In an isothermal process on an ideal gas, the pressure increases by 0.5 percent. The volume decreases by about __________ percent. (A) 0.25 (B) 0.5 (C) 0.75 (D) 1

Last Answer : (B) 0.5

Calculate the magnetization of a material with susceptibility of 50 and field intensity of 0.25 units. a) 12.5 b) 25 c) 75

Description : Calculate the magnetization of a material with susceptibility of 50 and field intensity of 0.25 units. a) 12.5 b) 25 c) 75 d) 37.5

Last Answer : a) 12.5

What will be the pressure of a sample of 48.0 grams of oxygen gas in a glass container of volume 5.2 L at 25 and degC?

Description : What will be the pressure of a sample of 48.0 grams of oxygen gas in a glass container of volume 5.2 L at 25 and degC?

Last Answer : Need answer

What will be the pressure of a sample of 48.0 grams of oxygen gas in a glass container of volume 5.2 L at 25 degrees Celsius?

Description : What will be the pressure of a sample of 48.0 grams of oxygen gas in a glass container of volume 5.2 L at 25 degrees Celsius?

Last Answer : PV = nRTP = pressure = ?V = volume = 5.2 Ln = moles of gas = 48 g x 1 mole/32 g = 1.5 moles O2 gasR = gas constant = 0.0821 L-atm/K-moleT = temperature in K = 25 + 273 = 298 KSolving for P = nRT/V = (1.5)(0.0821)(298)/5.2P = 7.0 atm (to 2 significant figures)

The volume of a gas is reduced from 4 L to 0.5 L while the temperature is held constant. What does the pressure of the gas do?

Description : The volume of a gas is reduced from 4 L to 0.5 L while the temperature is held constant. What does the pressure of the gas do?

Last Answer : increases by a factor of eight

A gas occupies a volume of 0.2 L at 176 mm Hg. What volume will the gas occupy at 760 mm Hg?

Description : A gas occupies a volume of 0.2 L at 176 mm Hg. What volume will the gas occupy at 760 mm Hg?

Last Answer : 0.05 L

The volume of a gas is reduced from 4 L to 0.5 L while the temperature is held constant. What does the pressure of the gas do?

Description : The volume of a gas is reduced from 4 L to 0.5 L while the temperature is held constant. What does the pressure of the gas do?

Last Answer : increases by a factor of eight

A gas occupies a volume of 0.2 L at 176 mm Hg. What volume will the gas occupy at 760 mm Hg?

Description : A gas occupies a volume of 0.2 L at 176 mm Hg. What volume will the gas occupy at 760 mm Hg?

Last Answer : 0.05 L

Calculate the volume of 1 mole of a gas at exactly 20°C at a pressure of 101.35 kPa.

Description : Calculate the volume of 1 mole of a gas at exactly 20°C at a pressure of 101.35 kPa.

Last Answer : Calculate the volume of 1 mole of a gas at exactly 20°C at a pressure of 101.35 kPa.

Assuming compression is according to the Law PV = C, Calculate the initial volume of the gas at a pressure of 2 bars w/c will occupy a volume of 6m³ when it is compressed to a pressure of 42 Bars.  a) 130m³  b) 136m³  c) 120m³  d) 126m³ Formula: P1V1/T1 =P2V2/T2

Description : Assuming compression is according to the Law PV = C, Calculate the initial volume of the gas at a pressure of 2 bars w/c will occupy a volume of 6m³ when it is compressed to a pressure of 42 Bars.  a) 130m³  b) 136m³  c) 120m³  d) 126m³ Formula: P1V1/T1 =P2V2/T2

Last Answer : 126m³

In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational – Material – Size – Shape b.Material – Rotational or non rotational – Size – Shape c.Size – Rotational or non rotational – Material – Shape d.Shape – Rotational or non rotational – Material – Size

Description : In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational †Material †Size †Shape b.Material †Rotational or non ... non rotational †Material †Shape d.Shape †Rotational or non rotational †Material †Size

Last Answer : a.Rotational or non rotational – Material – Size – Shape

In STL files Euler’s rule for solids can be written as a.No. of faces – No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces – No. of edges + No. of vertices = No. of bodies c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies d.No. of faces – No. of edges + No. of vertices = 4 x No. of bodies

Description : In STL files Euler’s rule for solids can be written as a.No. of faces †No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces †No. of edges + No. of vertices = No. of bodies c.No. of ... = 2 x No. of bodies d.No. of faces †No. of edges + No. of vertices = 4 x No. of bodies

Last Answer : c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies

Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above

Description : Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above

Last Answer : c.Machine control unit

……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Description : ……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : b.machine Zero Point

In CNC programming …….. is commonly used canned cycle for Stock removal cycle a.G71 b.G72 c.G73 d.G74

Description : In CNC programming …….. is commonly used canned cycle for Stock removal cycle a.G71 b.G72 c.G73 d.G74

Last Answer : d.G74

Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Description : Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Last Answer : c.Canned Cycle

……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Description : ……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Last Answer : b.Macro

Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Description : Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Last Answer : b.Parallel

In a CNC program block, N05 GO1 G91 G33 X20 Z-40 K5……, K refer to a.Depth of cut b.Pitch c.Multiple Threading Cycle d.Feed

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40 K5……, K refer to a.Depth of cut b.Pitch c.Multiple Threading Cycle d.Feed

Last Answer : b.Pitch

In CNC Program M98 is refer to…… a.CANCEL Subroutine b.Call Sub-Program c.Call Subroutine d.CANCEL Sub-Program

Description : In CNC Program M98 is refer to…… a.CANCEL Subroutine b.Call Sub-Program c.Call Subroutine d.CANCEL Sub-Program

Last Answer : b.Call Sub-Program

In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Description : In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Last Answer : a.Spindle ON in Clockwise rotation

In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Last Answer : c.Thread Cutting

Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Description : Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Last Answer : a.Words

……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Description : ……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Last Answer : d.Block

he linking of computer with a communication system is called……….. a.networking b.pairing c.interlocking d.assembling

Description : he linking of computer with a communication system is called……….. a.networking b.pairing c.interlocking d.assembling

Last Answer : a.networking

Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Description : Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Last Answer : c.c-axis

In a CNC program block, N02 GO2 G91 X40 Z40……, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular interpolation in counter clockwise direction and absolute dimension c.circular interpolation in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Description : In a CNC program block, N02 GO2 G91 X40 Z40††, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular ... in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Last Answer : c.circular interpolation in clockwise direction and incremental dimension

Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Last Answer : c.truss element