Can new paint be applied to a moldy surface?

Can new paint be applied to a moldy surface?
by

1 Answer

Answer :

You should wash out and disinfect the mold. Then paint it over with a couple layers for the best results. After all of that you should buy and put some primer over the older paint. That will make the paint last much longer and shinier. After all this you will have nicely painted areas of you house.
by

Related questions

I just ate pot stickers that I fried with moldy butter. Will I get sick?

Description : I just ate pot stickers that I fried with moldy butter. Will I get sick?

Last Answer : Most likely, no, you will not get sick. However, you must monitor yourself for the next 24 hours. If you feel like farting, sit on the toilet to do it just in case it's more than air. If you feel ... run to the toilet. A lot depends on your age and general health. More than likely, you'll be fine.

What are the possible physical aftereffects from eating moldy bread (including the mold)?

Description : What are the possible physical aftereffects from eating moldy bread (including the mold)?

Last Answer : A bad taste in your mouth.

When solid food goes bad it's moldy, when liquidy food goes bad it's what?

Description : When solid food goes bad it's moldy, when liquidy food goes bad it's what?

Last Answer : Rancid. Expired. Slimey.

Has anyone ever eaten an apple with a moldy core?

Description : Has anyone ever eaten an apple with a moldy core?

Last Answer : Yes, I’ve experienced that. While it was gross, I’ve lived to tell the tale more than once. Come to think of it, maybe that is why I now cut apples up instead of biting into a whole one.

Why do our clothes smell moldy when they come out of the washer?

Description : Why do our clothes smell moldy when they come out of the washer?

Last Answer : answer:Does the load smell moldy right after the last spin cycle is done? Does your washing machine drum smell moldy after a wash or at any other time? If so, you might try doing a complete cycle ... out. If you have a front loader, try leaving the door open for about the same length of time.

How can I demoldify books that were in a moldy basement?

Description : How can I demoldify books that were in a moldy basement?

Last Answer : put all your books in a bag with some baking soda for a few weeks.

How contagious is moldy bread AND how to handle this roommate situation?

Description : How contagious is moldy bread AND how to handle this roommate situation?

Last Answer : 1. You are correct about the unseen mold and how much it has spread. If you get far enough in the loaf to where you can't taste it yet, you could eat it with no harm, but I would toss it ... setting them up. Try to meet the friend away from your home. If unavoidable, give the roommate a heads up.

Moldy odor from under the kitchen sink. Suggestions?

Description : Moldy odor from under the kitchen sink. Suggestions?

Last Answer : there’s a product on the shelves called “damp rid.” try it out and let me know results

I just ate some moldy butter. Should I be worried?

Description : I just ate some moldy butter. Should I be worried?

Last Answer : You’ll probably be fine. You may get a bit queezy in the short run…. But I would imagine you’ll be totally fine with an a few hours…. If you’re really nervous about it, drink a lot of water, that usually helps.

How get rid of moldy stench in old books?

Description : How get rid of moldy stench in old books?

Last Answer : Lysol.

what to put on zucchini has grey moldy places on leavesDisease ?

Description : what to put on zucchini has grey moldy places on leavesDisease ?

Last Answer : Need Answer

Can the planks get moldy in the attic if we cover them with cover?

Description : There is already a vapor-permeable foil underneath.

Last Answer : The point is to properly insulate the slab, because then no heat bridge will be created, which could cause it to condense. So if the slab is properly filled with cotton or other insulation, you don’t have to be afraid of moisture, that is, mold.  

Can I Consume Moldy Cheese During Pregnancy?

Description : I'm not pregnant yet, we're just planning a baby. So my question is completely theoretical.

Last Answer : I don't know if there is any problem with moldy cheeses.

How to know a moldy floodplain?

Description : Is it possible at all? Know if she's not spoiled?

Last Answer : when you know how to taste and look right, you know the spoiled ...

How dangerous is it if you accidentally inhaled mold dust cloud from when throwing out moldy bread?

Description : How dangerous is it if you accidentally inhaled mold dust cloud from when throwing out moldy bread?

Last Answer : What is the answer ?

Slime molds differ from the moldy fungi A- in their mode of nutrition: phagocytosis for the slime molds; absorptive heterotroph for moldy fungi B- in that the moldy fungi produce amoeboid or flagellated cells and the slime molds do not C- Both (a) and (b) D- none of the above

Description : Slime molds differ from the moldy fungi A- in their mode of nutrition: phagocytosis for the slime molds; absorptive heterotroph for moldy fungi B- in that the moldy fungi produce amoeboid or flagellated cells and the slime molds do not C- Both (a) and (b) D- none of the above

Last Answer : in their mode of nutrition: phagocytosis for the slime molds; absorptive heterotroph for moldy fungi

GMO stands for ____. a. genetically modified organism c. gross moldy oranges b. genetically manufactured oranges d. genetically malfunctioning organisms

Description : GMO stands for ____. a. genetically modified organism c. gross moldy oranges b. genetically manufactured oranges d. genetically malfunctioning organisms

Last Answer : a. genetically modified organism

How to Remove Moldy Caulking

Description : How to Remove Moldy Caulking

Last Answer : How to Remove Moldy Caulking Nobody wants to see ugly black mold on caulk, especially in the bathroom. You can clean and bleach the mold temporarily, but the problem will come back after some time. ... a re-caulking project. Just follow these steps and remove those nasty looking mold on your walls.

Is it advisable to prime walls before painting even though they have a previously applied covering of paint?

Description : Is it advisable to prime walls before painting even though they have a previously applied covering of paint?

Last Answer : No, just wipe them down to clean them. The primary function of primer is to seal the drywall or wood so it won't absorb the more expensive paint. Priming an already painted surface only helps if the ... is very dark, and you're painting it a much lighter color, as it starts to lighten it up.

Do you know of any quality paint pens that don't bleed when varnish is applied?

Description : Do you know of any quality paint pens that don't bleed when varnish is applied?

Last Answer : maybe the store you’re buying the pens at would know?

Which of the following statements, concerning the general maintenance of a brushless generator, is correct? A. Paint should be applied to insulating surfaces on an annual basis. B. Alcohol should be used to remove dust and grime from windings. C. High pressure air should be used to blow out carbon dust. D. Accessible generator parts should be wiped with a clean dry rag on a periodic basis.

Description : Which of the following statements, concerning the general maintenance of a brushless generator, is correct? A. Paint should be applied to insulating surfaces on an annual basis. B. Alcohol should be used to ... . D. Accessible generator parts should be wiped with a clean dry rag on a periodic basis.

Last Answer : Answer: D

A freshly painted surface (latex paint, 24 hours dry) still sort of smells like paint. Is it OK to cover with fabric and cushions, or is it really not cured yet?

Description : A freshly painted surface (latex paint, 24 hours dry) still sort of smells like paint. Is it OK to cover with fabric and cushions, or is it really not cured yet?

Last Answer : Personally, I would wait. Particularly if you’re going to be putting weight on the covering fabric – you could end up with impressions in the paint, and/or traces of paint on the fabric. Unless you have a guest coming over right away, I’d give it a bit longer to be safe.

What is the best way to paint a high gloss surface?

Description : What is the best way to paint a high gloss surface?

Last Answer : No you don’t need to sand. You might need two coats though, or you could use a primer. I painted over high gloss a little while ago, with Behr paint and the first coat didn’t cover 100 percent. The second coat came out really nice.

What is the fastest method for removing loose oil paint on a wood surface?

Description : What is the fastest method for removing loose oil paint on a wood surface?

Last Answer : Simply have the MIL breathe on the affected area, gone in a jiffy!

Outdoor paint for wooden surface in strong/vibrant colours?

Description : Outdoor paint for wooden surface in strong/vibrant colours?

Last Answer : answer:How tall, how long and wide, and how visible from street is the fence? Do you have brightly coloured blooms in your garden that you can echo? Or would too many strong pure tones ... polyurethane. And word has it that the old-fashioned milk paint is indistructable. Might be expensive, however.

The heat transfer by radiation from a mild steel surface is to be reduced by reducing the emissivity of the surface. This can be best achieved by (A) Painting the surface black (B) Painting the surface white (with aluminium paint) (C) Giving the surface a mirror finish (D) Roughening the surface

Description : The heat transfer by radiation from a mild steel surface is to be reduced by reducing the emissivity of the surface. This can be best achieved by (A) Painting the surface black (B) ... white (with aluminium paint) (C) Giving the surface a mirror finish (D) Roughening the surface

Last Answer : (B) Painting the surface white (with aluminium paint)

What is the paint used in the surface and interior of enclosure and why it is?

Description : What is the paint used in the surface and interior of enclosure and why it is? 

Last Answer : Matt black paint, for efficient heat dissipation.  

Pick up the correct statement from the following: (A) Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish (B) Cracked paints may be cured by removing paint and giving a fresh coat of paint (C) Crawling paints may be cured by sand preparing the surface and giving a fresh coat with plenty of turps (D) All the above

Description : Pick up the correct statement from the following: (A) Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish (B) Cracked paints may be cured by ... sand preparing the surface and giving a fresh coat with plenty of turps (D) All the above

Last Answer : Answer: Option D

Seasoning of timber is done (A) To make it water proof (B) To paint its surface (C) To increase its temperature (D) To remove water

Description : Seasoning of timber is done (A) To make it water proof (B) To paint its surface (C) To increase its temperature (D) To remove water

Last Answer : Answer: Option D

Explain the procedure of preparation of surface along with the method of application of color wash paint on the wall.

Description : Explain the procedure of preparation of surface along with the method of application of color wash paint on the wall.

Last Answer : The correct preparation of surface plays an important role in preserving the properties and life of the paint. For these the procedure is as follows: 1.If the receiving surface is rough, it should be made smooth ... of color wash paint on the wall. 1.By Brushing. 2.By Spraying. 3. By Rollers.

The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Description : The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Last Answer : c. Frictional movement of a particle over a surface

Is it true that more force must be applied when pushing something across rough surface?

Description : Is it true that more force must be applied when pushing something across rough surface?

Last Answer : What is the answer ?

When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter pointer _____________. A. fluctuating around a constant resistance reading B. dipping towards 'zero', then rising slowly C. kicking slightly downscale as voltage is applied D. continually rising as the test voltage is applied

Description : When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter pointer _____________. A. fluctuating around a ... slightly downscale as voltage is applied D. continually rising as the test voltage is applied

Last Answer : Answer: C

When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter's pointer _____________. A. dipping toward zero then raising slowly B. continually rising as test voltage is applied C. kicking slightly down scale as voltage is applied D. fluctuating around a constant resistance reading

Description : When a megohmmeter is being used to test insulation resistance, current leakage along the surface of the insulation is indicated by the megohmmeter's pointer _____________. A. dipping toward ... kicking slightly down scale as voltage is applied D. fluctuating around a constant resistance reading

Last Answer : Answer: C

Find the current density on the conductor surface when a magnetic field H = 3cos x i + zcos x j A/m, for z>0 and zero, otherwise is applied to a perfectly conducting surface in xy plane. a) cos x i b) –cos x i c) cos x j d) –cos x j

Description : Find the current density on the conductor surface when a magnetic field H = 3cos x i + zcos x j A/m, for z>0 and zero, otherwise is applied to a perfectly conducting surface in xy plane. a) cos x i b) –cos x i c) cos x j d) –cos x j

Last Answer : b) –cos x i

The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Description : The most suitable chemical which can be applied to the water surface for reducing evaporation is (A) Methyl alcohol (B) Ethyl alcohol (C) Cetyl alcohol (D) Butyl alcohol

Last Answer : Answer: Option C

Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent formation of an “overhang” D. Provide adequate physiological contour for the proximal surface E. Provide an acceptable surface texture to the proximal surface F. All of the above

Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above

Last Answer : F. All of the above

.When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Description : .When correction preparation for re contouring of occlusal surface is to be applied, grinding only of the adjusted surface: A. Should not be felt flat B. Requires a flat crown C. Requires no contact with adjacent teeth D. Should be felt flat

Last Answer : A. Should not be felt flat

If in a bar after twisting moment T has been applied, a line on surface is moved by an angle g then shearing moment will be (a) t/g (b) g (c) g/t (d) none of these

Description : If in a bar after twisting moment T has been applied, a line on surface is moved by an angle g then shearing moment will be (a) t/g (b) g (c) g/t (d) none of these

Last Answer : (b) g

A 10 kilogram mass rests on a horizontal frictionless surface. A horizontal force of 5 Newtons is applied to the mass. After the force has been applied for 1 second, the velocity of the mass is: w) 0 meters per second x) 0.5 meters per second y) 5 meters per second z) 50 meters per second

Description : A 10 kilogram mass rests on a horizontal frictionless surface. A horizontal force of 5 Newtons is applied to the mass. After the force has been applied for 1 second, the velocity of the mass is: w) 0 meters per second x) 0.5 meters per second y) 5 meters per second z) 50 meters per second

Last Answer : ANSWER: X -- 0.5 METERS PER SECOND

Surface tension of liquids is the result of which the following: w) interaction of a liquid with its container x) unbalanced forces on the liquid's surface molecules y) adhesive forces of the liquid z) interaction of the liquid's surface molecules and the applied pressure

Description : Surface tension of liquids is the result of which the following: w) interaction of a liquid with its container x) unbalanced forces on the liquid's surface molecules y) adhesive forces of the liquid z) interaction of the liquid's surface molecules and the applied pressure

Last Answer : ANSWER: X -- UNBALANCED FORCES ON THE LIQUID'S SURFACE MOLECULES