Why do you use brass screws?

Question

Why do you use brass screws?

asked Jan 14, 2022 by anonymous

1 Answer

Answer :

fastener and even if it is designed to fasten wood to wood, it could also fasten sheet metal to wood.

answered Jan 14, 2022 by anonymous

Related questions

Can I use my drill for screws and bolts?

Description : Can I use my drill for screws and bolts?

Last Answer : Yes.You just need the correct bit.Most drills won't have the torque to really tighten something that's difficult though.

How to keep the screws in the holes on the bottom of my laptop?

Description : How to keep the screws in the holes on the bottom of my laptop?

Last Answer : You can, of course, use tape or superglue, but if it were my laptop, I’d try to get the manufacturer, dealer or a repairer to replace the screws with ones that stayed screwed in, as they’re supposed to be.

Is there such thing as clear plastic tapping screws?

Description : Is there such thing as clear plastic tapping screws?

Last Answer : I doubt that plastic is strong enough to make a tapping screw. It would have to be at least as strong as brass (which is a relatively soft metal).

How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Description : How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Last Answer : answer:Welcome to Fluther. I don't know about anyone else, but I have no idea what you're talking about. I don't know what a balisong is, in the first place, but even more important (to me ... helpful. We try to be helpful, but contrary to some expectations we cannot read minds as a general rule.

How do I unscrew these (laptop) screws I can't get a grip on?

Description : How do I unscrew these (laptop) screws I can't get a grip on?

Last Answer : tip of a strong sharp knife, but it may bent the knife. Jewlers screwdriver set at Radio shack or walmart are inexpensive

What is the glue on computer screws called?

Description : What is the glue on computer screws called?

Last Answer : answer:It’s Loctite. Specifically, the blue stuff, which I see most often, is this one but there are different strengths and applications.

How can I remove 4 stripped screws from computer panel without damaging computer, including threading?

Description : How can I remove 4 stripped screws from computer panel without damaging computer, including threading?

Last Answer : Go to the hardware store and get a reverse-tap drill bit. It’ll work like a charm.

Why do they make flat head and philips screws? Why not just have one type?

Description : Why do they make flat head and philips screws? Why not just have one type?

Last Answer : to annoy me. today at work i took out these phillips screws holding on a piece of paneling then half an inch under it was a flathead screw to attach the power wires….wtf the toolbox was so far away

We all know that Britney Spears, has some screws loose. Does anyone think she has some sort of mental illness? Will she ever get a grip? Or is she just too closely scrutinized?

Description : We all know that Britney Spears, has some screws loose. Does anyone think she has some sort of mental illness? Will she ever get a grip? Or is she just too closely scrutinized?

Last Answer : Leave the poor woman alone. If I had every single detail of my life out in the public eye, I’d go crazy too.

I am looking for a commonly used phrase for putting pressure on someone. Like "put the heat on" or "put the screws to." i'm sure there are more polite ways to say this colloquially. How?

Description : I am looking for a commonly used phrase for putting pressure on someone. Like "put the heat on" or "put the screws to." i'm sure there are more polite ways to say this colloquially. How?

Last Answer : “The full court press”? Can you give any more context?

How to make long bracket screws for TV

Description : I want to hang the TV on the wall, I know I need to have a bracket according to VESA dimensions. But nowhere did I read about the length of the screws. Samsung TV.

Last Answer : When I bought the TV mount, there were dowels and screws. They should also advise you directly when selling the holder.

Cutting nails and screws

Description : How to store nails in the workshop so that they do not rust?

Last Answer : You have to preserve them. For example, oil. If you only need about 1 year, soak it in diesel and let it dry freely. It can be repeated after a year.

How to adjust screws against loosening.

Description : I have grilles mounted on the cottage but they have a hexagon so the screws can be loosened with a wrench. How to prevent permission?

Last Answer : Take a grinder and grind the hexagons into a round.

How to clean rusty nails and screws.

Description : What solution is it to throw in to get the rust here? It's not extra rusty.

Last Answer : You need to consider whether the rusting is worth it at all. At present, nails and screws with a stainless steel finish are available on the market, and there is plenty of everything. Otherwise, just soak in kerosene or diesel, or use a liquid cutter.

What are some real world examples of screws?

Description : What are some real world examples of screws?

Last Answer : A Jarlid

What are the number of Minimum screws required to for placing the motherboard?

Description : What are the number of Minimum screws required to for placing the motherboard?

Last Answer : 6

Besides grinding what are some other methods used to thread ball screws?

Description : Besides grinding what are some other methods used to thread ball screws?

Last Answer : Besides grinding, another method is recirculating ball nut and shaft assembly. This method rolled thread ball screws cost less than ground ball screws but deliver virtually the same accuracy and performance You used ... to have a die with the correct width and pitch (the angle of the threading).

Does the Razo RG8 JDM Digital car clock stick with suction, screws or glue?

Description : Does the Razo RG8 JDM Digital car clock stick with suction, screws or glue?

Last Answer : It uses a suctioning feature to attach it.

Will Office Depot replace missing screws for my compact computer desk?

Description : Will Office Depot replace missing screws for my compact computer desk?

Last Answer : Sounds like you'll probably have to contact the manufacturer, or get the screws yourself at a local hardware store. Office Depot doesn't open the packages, so they wouldn't likely have spare screws available.

Removing Broken Screws With an Extractor?

Description : Removing Broken Screws With an Extractor?

Last Answer : Broken screws are incredibly frustrating to remove, especially when it's just the screw head that's broken off. Fortunately, screw extractors make this process as clean and simple as possible. A screw ... turn it counter-clockwise. The broken screw should, with a little effort, begin to slide out.

When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by _____________. A. knotting the cords together at the plugs B. taping the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Description : When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by ... the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Last Answer : Answer: D

The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Description : The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Last Answer : Answer: C

Set screws are subjected to tensile forces only. a) Yes b) No, they are subjected to compressive forces only c) Both compressive and tensile d) Can’t be determined

Description : Set screws are subjected to tensile forces only. a) Yes b) No, they are subjected to compressive forces only c) Both compressive and tensile d) Can’t be determined

Last Answer : b) No, they are subjected to compressive forces only

Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Description : Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Last Answer : b. Set screws

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it satisfactorily (C) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Description : Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it ... ) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Last Answer : (D) All the above

Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) Mandrels, twist drills, small lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Last Answer : (A) Small punches, broaches reamers and springs

Screws are specified by their __________ diameters. (A) Minor (B) Major (C) Pitch (D) None of these

Description : Screws are specified by their __________ diameters. (A) Minor (B) Major (C) Pitch (D) None of these

Last Answer : (B) Major

What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Description : What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Last Answer : The heating and cooling cycles.

In addition to its use in the military which brass instrument was used on festive occasions to announce that dinner guests needed to sit down and stand up at the beginning and end of meal?

Description : In addition to its use in the military which brass instrument was used on festive occasions to announce that dinner guests needed to sit down and stand up at the beginning and end of meal?

Last Answer : buccina

What period did Valves for brass instruments come to use?

Description : What period did Valves for brass instruments come to use?

Last Answer : Modern piston valves (the type that move up and down) weredeveloped in the 1830s. Rotary valves were introduced some 20 yearsearlier.

What should you use to clean brass hardware on your door?

Description : What should you use to clean brass hardware on your door?

Last Answer : For light soils you can use rubbing alcohol.For heavier soils you may need a brass cleaning paste.

When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Description : When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Last Answer : Answer: C

What is the effect of addition of zinc in copper? What is the use of 70/30 brass ?

Description : What is the effect of addition of zinc in copper? What is the use of 70/30 brass ?

Last Answer : By addition of zinc in copper, both tensile strength and elongation increases. The 70/30 brass has excellent deep drawing property and is used for making radiator fins.

Whatever happened to brass knuckles?

Description : Whatever happened to brass knuckles?

Last Answer : answer:Here's the pertinent part of the law in Illinois: Unlawful Use of Weapons (a) A person commits the offense of unlawful use of weapons when he knowingly: (1) Sells, manufactures, purchases ... A misdemeanor, meaning the maximum sentence is less than one year imprisonment and a $2,500 fine.

Will copper polish also polish brass?

Description : Will copper polish also polish brass?

Last Answer : It sounds like you don’t need the abrasive action of the pot cleaner, and I’d worry that it might dull the finish on a piece of jewelry. You can use a mixture of either vinegar or lemon juice with salt as an effective tarnish remover for brass.

Are all the low brass in concert key?

Description : Are all the low brass in concert key?

Last Answer : answer:Check here, it looks like pretty much none of them are in C. My high school band had a euphonium; they’re still around.

How do I fix/identify a leaky brass gate valve?

Description : How do I fix/identify a leaky brass gate valve?

Last Answer : answer:You didn't say where the leak is occurring, but I'm guessing it's in the stem under the valve handle. That's the most common place for leaking to be a problem, unless the valve itself is ... need if you show them your photo - and advise them if your system is for anything more than water.

Where can I find the "Brass Knuckles" album?

Description : Where can I find the "Brass Knuckles" album?

Last Answer : It's hard to answer this, particularly since I don't know what retailers you have near you. It looks like F.Y.E., SunCoast, and Sam Goody carry the album (the clean version). It looks like ... . check out Barnes & Noble online before Amazon, as I have often saved several dollars per album that way.

A hemispherical bowl made of brass has inner diameter 10.5cm. Find the cost of tin-plating it on the inside at the rate of Rs 16 per 100 cm2. -Maths 9th

Description : A hemispherical bowl made of brass has inner diameter 10.5cm. Find the cost of tin-plating it on the inside at the rate of Rs 16 per 100 cm2. -Maths 9th

Last Answer : Inner radius of hemispherical bowl, say r = diameter/2 = (10.5)/2 cm = 5.25 cm Formula for Surface area of hemispherical bowl = 2πr2 = 2 (22/7) (5.25)2 = 173.25 Surface area of hemispherical ... of tin-plating the inner side of the hemispherical bowl at the rate of Rs 16 per 100 cm2 is Rs 27.72.

Classify the following mixtures as homogeneous and heterogeneous. (i)Tincture of iodine (iv)Sugar solution (ii)Smoke (iii)Brass -Chemistry

Description : Classify the following mixtures as homogeneous and heterogeneous. (i)Tincture of iodine (iv)Sugar solution (ii)Smoke (iii)Brass -Chemistry

Last Answer : In the above classification, tincture of iodine, brass and sugar are homogenous mixture while the smoke is heterogeneous mixture. Tincture of iodine is a liquid solution, brass is an alloy made ... component. Smoke on other hand is composed of moisture and gas thus making the mixture heterogeneous.

Brass is a mixture of which two metals? -General Knowledge

Description : Brass is a mixture of which two metals? -General Knowledge

Last Answer : Brass, alloy of copper and zinc, of historical and enduring importance because of its hardness and workability. The earliest brass, called calamine brass, dates to Neolithic times; it was probably made by reduction of mixtures of zinc ores and copper ores.

Brass gets discolored in air because of the presence of which of the gases in the air? -Science

Description : Brass gets discolored in air because of the presence of which of the gases in the air? -Science

Last Answer : The answer is Hydrogen Sulphide.

What does brass mean ?

Description : What does brass mean ?

Last Answer : Kangs means --- Lord of Mathura, the cousin and absolute enemy of Lord Krishna. Bronze.

What is the melting point of brass ?

Description : What is the melting point of brass ?

Last Answer : The melting point of brass is 800 to 1000 degrees.

What is the density of brass ?

Description : What is the density of brass ?

Last Answer : Brass density 8.6 .