Can I use my drill for screws and bolts?

Can I use my drill for screws and bolts?
by

1 Answer

Answer :

Yes.You just need the correct bit.Most drills won't have the torque to really tighten something that's difficult though.
by

Related questions

Why do you use brass screws?

Description : Why do you use brass screws?

Last Answer : fastener and even if it is designed to fasten wood to wood, it could also fasten sheet metal to wood.

How to keep the screws in the holes on the bottom of my laptop?

Description : How to keep the screws in the holes on the bottom of my laptop?

Last Answer : You can, of course, use tape or superglue, but if it were my laptop, I’d try to get the manufacturer, dealer or a repairer to replace the screws with ones that stayed screwed in, as they’re supposed to be.

Is there such thing as clear plastic tapping screws?

Description : Is there such thing as clear plastic tapping screws?

Last Answer : I doubt that plastic is strong enough to make a tapping screw. It would have to be at least as strong as brass (which is a relatively soft metal).

How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Description : How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Last Answer : answer:Welcome to Fluther. I don't know about anyone else, but I have no idea what you're talking about. I don't know what a balisong is, in the first place, but even more important (to me ... helpful. We try to be helpful, but contrary to some expectations we cannot read minds as a general rule.

How do I unscrew these (laptop) screws I can't get a grip on?

Description : How do I unscrew these (laptop) screws I can't get a grip on?

Last Answer : tip of a strong sharp knife, but it may bent the knife. Jewlers screwdriver set at Radio shack or walmart are inexpensive

What is the glue on computer screws called?

Description : What is the glue on computer screws called?

Last Answer : answer:It’s Loctite. Specifically, the blue stuff, which I see most often, is this one but there are different strengths and applications.

How can I remove 4 stripped screws from computer panel without damaging computer, including threading?

Description : How can I remove 4 stripped screws from computer panel without damaging computer, including threading?

Last Answer : Go to the hardware store and get a reverse-tap drill bit. It’ll work like a charm.

Why do they make flat head and philips screws? Why not just have one type?

Description : Why do they make flat head and philips screws? Why not just have one type?

Last Answer : to annoy me. today at work i took out these phillips screws holding on a piece of paneling then half an inch under it was a flathead screw to attach the power wires….wtf the toolbox was so far away

We all know that Britney Spears, has some screws loose. Does anyone think she has some sort of mental illness? Will she ever get a grip? Or is she just too closely scrutinized?

Description : We all know that Britney Spears, has some screws loose. Does anyone think she has some sort of mental illness? Will she ever get a grip? Or is she just too closely scrutinized?

Last Answer : Leave the poor woman alone. If I had every single detail of my life out in the public eye, I’d go crazy too.

I am looking for a commonly used phrase for putting pressure on someone. Like "put the heat on" or "put the screws to." i'm sure there are more polite ways to say this colloquially. How?

Description : I am looking for a commonly used phrase for putting pressure on someone. Like "put the heat on" or "put the screws to." i'm sure there are more polite ways to say this colloquially. How?

Last Answer : “The full court press”? Can you give any more context?

How to make long bracket screws for TV

Description : I want to hang the TV on the wall, I know I need to have a bracket according to VESA dimensions. But nowhere did I read about the length of the screws. Samsung TV.

Last Answer : When I bought the TV mount, there were dowels and screws. They should also advise you directly when selling the holder.

Cutting nails and screws

Description : How to store nails in the workshop so that they do not rust?

Last Answer : You have to preserve them. For example, oil. If you only need about 1 year, soak it in diesel and let it dry freely. It can be repeated after a year.

How to adjust screws against loosening.

Description : I have grilles mounted on the cottage but they have a hexagon so the screws can be loosened with a wrench. How to prevent permission?

Last Answer : Take a grinder and grind the hexagons into a round.

How to clean rusty nails and screws.

Description : What solution is it to throw in to get the rust here? It's not extra rusty.

Last Answer : You need to consider whether the rusting is worth it at all. At present, nails and screws with a stainless steel finish are available on the market, and there is plenty of everything. Otherwise, just soak in kerosene or diesel, or use a liquid cutter.

What are some real world examples of screws?

Description : What are some real world examples of screws?

Last Answer : A Jarlid

What are the number of Minimum screws required to for placing the motherboard?

Description : What are the number of Minimum screws required to for placing the motherboard?

Last Answer : 6

Besides grinding what are some other methods used to thread ball screws?

Description : Besides grinding what are some other methods used to thread ball screws?

Last Answer : Besides grinding, another method is recirculating ball nut and shaft assembly. This method rolled thread ball screws cost less than ground ball screws but deliver virtually the same accuracy and performance You used ... to have a die with the correct width and pitch (the angle of the threading).

Does the Razo RG8 JDM Digital car clock stick with suction, screws or glue?

Description : Does the Razo RG8 JDM Digital car clock stick with suction, screws or glue?

Last Answer : It uses a suctioning feature to attach it.

Will Office Depot replace missing screws for my compact computer desk?

Description : Will Office Depot replace missing screws for my compact computer desk?

Last Answer : Sounds like you'll probably have to contact the manufacturer, or get the screws yourself at a local hardware store. Office Depot doesn't open the packages, so they wouldn't likely have spare screws available.

Removing Broken Screws With an Extractor?

Description : Removing Broken Screws With an Extractor?

Last Answer : Broken screws are incredibly frustrating to remove, especially when it's just the screw head that's broken off. Fortunately, screw extractors make this process as clean and simple as possible. A screw ... turn it counter-clockwise. The broken screw should, with a little effort, begin to slide out.

When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by _____________. A. knotting the cords together at the plugs B. taping the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Description : When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by ... the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Last Answer : Answer: D

The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Description : The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Last Answer : Answer: C

Set screws are subjected to tensile forces only. a) Yes b) No, they are subjected to compressive forces only c) Both compressive and tensile d) Can’t be determined

Description : Set screws are subjected to tensile forces only. a) Yes b) No, they are subjected to compressive forces only c) Both compressive and tensile d) Can’t be determined

Last Answer : b) No, they are subjected to compressive forces only

Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Description : Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Last Answer : b. Set screws

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it satisfactorily (C) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Description : Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it ... ) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Last Answer : (D) All the above

Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) Mandrels, twist drills, small lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Last Answer : (A) Small punches, broaches reamers and springs

Screws are specified by their __________ diameters. (A) Minor (B) Major (C) Pitch (D) None of these

Description : Screws are specified by their __________ diameters. (A) Minor (B) Major (C) Pitch (D) None of these

Last Answer : (B) Major

What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Description : What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Last Answer : The heating and cooling cycles.

Have you ever stuck out your hands and pretended that you are shooting lighting bolts from your hands?

Description : Have you ever stuck out your hands and pretended that you are shooting lighting bolts from your hands?

Last Answer : No, but I keep trying to fly. Still waiting for my super-powers to mature.

What would make you break Usain Bolt's 100 meter record?

Description : What would make you break Usain Bolt's 100 meter record?

Last Answer : Finding out that I had a possessive stalker of the equivalent or greater level than that scary lady from Misery.

Car people - any tricks for loosening caliper mounting bolts (brakes)

Description : Car people - any tricks for loosening caliper mounting bolts (brakes)

Last Answer : There are these people, I think they are called mechanics, that you can pay to do that shit for you. :)

Can you collect electricity from Lightning Bolts?

Description : Can you collect electricity from Lightning Bolts?

Last Answer : I think there are more reliable energy resources out there, ones with much more time, money, and effort already invested into making them commercially viable.

A box of hardware contains nuts and bolts. The bolts account for 25 percent of the number of items in the box. What percentage are the bolts of the entire box. -Riddles

Description : A box of hardware contains nuts and bolts. The bolts account for 25 percent of the number of items in the box. What percentage are the bolts of the entire box. -Riddles

Last Answer : 20 percent. For example, there are 10 bolts. Since the number of bolts is 25 percent of the number of items, there must be 40 nuts. The total number of items = 10 bolts + 40 nuts = 50. So, 10/50 = 1/5 = 20%.

A box contains 50 bolts and 150 nuts. On checking the box, it was found that half of the bolts and half of the nuts are rusted. -Maths 9th

Description : A box contains 50 bolts and 150 nuts. On checking the box, it was found that half of the bolts and half of the nuts are rusted. -Maths 9th

Last Answer : Total number of nuts and bolts in the box = 150 + 50 = 200 Number of nuts and bolts rusted = 1 / 2 × 200 = 100 P(a rusted nut or bolt) = 100 / 200 = 1 / 2

A box contains 50 bolts and 150 nuts. On checking the box, it was found that half of the bolts and half of the nuts are rusted. -Maths 9th

Description : A box contains 50 bolts and 150 nuts. On checking the box, it was found that half of the bolts and half of the nuts are rusted. -Maths 9th

Last Answer : Total number of nuts and bolts in the box = 150 + 50 = 200 Number of nuts and bolts rusted = 1 / 2 × 200 = 100 P(a rusted nut or bolt) = 100 / 200 = 1 / 2

Lubricate bolts when changing wheels at a car?

Description : Should the bolts be lubricated when changing wheels at the car or just the wheel hub or not at all? Thank you

Last Answer : I lubricate them with graphite grease

Wheel bolts

Description : Hello I bought a car Škoda Superb 1.9 TDI 96kw and I found that there are non-original wheels with special screws but it's all screws not one per wheel as usual, so I do not know if these are ... are embedded in the disk. Please do not know what this is and where such a key could be obtained?

Last Answer : Need Answer

How to prevent the wheel bolts on the car from cutting

Description : Can they be painted on the surface so that they do not rust?

Last Answer : buy buckets or rubber caps

What's the name of the movie in which people flew airships and caught lightning bolts in nets?

Description : I can't remember the title and I don't remember the story anymore: D

Last Answer : ... and the captain of that pirate airship is played by Robert de Niro, so it's Stardust (2007)

Can the wheel bolts on a car have an inverted thread?

Description : škoda superb? It can't be allowed at all

Last Answer : Certainly not

How to tighten wheel bolts on a car?

Description : Should I tighten them a lot at fest? So that the bike won't break. Or do you tighten them with emotion?

Last Answer : Firmly but with feeling.

What size bolts do I need to mount the stand on a Samsung 8 series 2009 plasma tv?

Description : What size bolts do I need to mount the stand on a Samsung 8 series 2009 plasma tv?

Last Answer : Need answer

How do you access flywheel bolts on 2000 Nissan Frontier?

Description : How do you access flywheel bolts on 2000 Nissan Frontier?

Last Answer : Either remove the engine or remove the transmission, take yourpick.

What are the torque specs for transmission pan bolts?

Description : What are the torque specs for transmission pan bolts?

Last Answer : 12ft. lbs. From the Haynes Techbook, General Motors AutomaticTransmission Overhaul. Page 8D-42

What kind of bolts can a buildup of static electricity cause?

Description : What kind of bolts can a buildup of static electricity cause?

Last Answer : Lightning bolts for one. Static electricity builds up, and when sufficient voltage is achieved, the bolt forms.

Tightening The Bolts?

Description : Tightening The Bolts?

Last Answer : If you need to repair something and you don't have the exact size of sockets or adapters, you can use a socket adapter to get the job done. Socket adapters can be attached to any type of socket to get the ... it too tight or if your cross thread it, you will ruin the bolt and need to get a new one.

tie rod end bolts on 2003 honda civic?

Description : tie rod end bolts on 2003 honda civic?

Last Answer : tie rod end bolts on 2003 Honda civic

What color are Usain Bolt's eyes?

Description : What color are Usain Bolt's eyes?

Last Answer : His eyes are a very dark brown color.

What is Usain Bolt's favorite color?

Description : What is Usain Bolt's favorite color?

Last Answer : green