What are the number of Minimum screws required to for placing the motherboard?

What are the number of Minimum screws required to for placing the motherboard?
by

1 Answer

Answer :

6
by

Related questions

For the supply of materials for concrete, form work reinforcing and placing of concrete, removal of form work and curing of concrete, number of bar(s) required on bar chart, is (A) 1 (B) 2 (C) 3 (D) 4

Description : For the supply of materials for concrete, form work reinforcing and placing of concrete, removal of form work and curing of concrete, number of bar(s) required on bar chart, is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (A) 1

Explant is required to be disinfected before placing in culture. This is done by

Description : Explant is required to be disinfected before placing in culture. This is done by

Last Answer : Explant is required to be disinfected before placing in culture. This is done by A. autoclaving B. ... rays C. clorax or-hypochlorite D. X-rays

How to keep the screws in the holes on the bottom of my laptop?

Description : How to keep the screws in the holes on the bottom of my laptop?

Last Answer : You can, of course, use tape or superglue, but if it were my laptop, I’d try to get the manufacturer, dealer or a repairer to replace the screws with ones that stayed screwed in, as they’re supposed to be.

Is there such thing as clear plastic tapping screws?

Description : Is there such thing as clear plastic tapping screws?

Last Answer : I doubt that plastic is strong enough to make a tapping screw. It would have to be at least as strong as brass (which is a relatively soft metal).

How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Description : How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Last Answer : answer:Welcome to Fluther. I don't know about anyone else, but I have no idea what you're talking about. I don't know what a balisong is, in the first place, but even more important (to me ... helpful. We try to be helpful, but contrary to some expectations we cannot read minds as a general rule.

How do I unscrew these (laptop) screws I can't get a grip on?

Description : How do I unscrew these (laptop) screws I can't get a grip on?

Last Answer : tip of a strong sharp knife, but it may bent the knife. Jewlers screwdriver set at Radio shack or walmart are inexpensive

What is the glue on computer screws called?

Description : What is the glue on computer screws called?

Last Answer : answer:It’s Loctite. Specifically, the blue stuff, which I see most often, is this one but there are different strengths and applications.

How can I remove 4 stripped screws from computer panel without damaging computer, including threading?

Description : How can I remove 4 stripped screws from computer panel without damaging computer, including threading?

Last Answer : Go to the hardware store and get a reverse-tap drill bit. It’ll work like a charm.

Why do they make flat head and philips screws? Why not just have one type?

Description : Why do they make flat head and philips screws? Why not just have one type?

Last Answer : to annoy me. today at work i took out these phillips screws holding on a piece of paneling then half an inch under it was a flathead screw to attach the power wires….wtf the toolbox was so far away

We all know that Britney Spears, has some screws loose. Does anyone think she has some sort of mental illness? Will she ever get a grip? Or is she just too closely scrutinized?

Description : We all know that Britney Spears, has some screws loose. Does anyone think she has some sort of mental illness? Will she ever get a grip? Or is she just too closely scrutinized?

Last Answer : Leave the poor woman alone. If I had every single detail of my life out in the public eye, I’d go crazy too.

I am looking for a commonly used phrase for putting pressure on someone. Like "put the heat on" or "put the screws to." i'm sure there are more polite ways to say this colloquially. How?

Description : I am looking for a commonly used phrase for putting pressure on someone. Like "put the heat on" or "put the screws to." i'm sure there are more polite ways to say this colloquially. How?

Last Answer : “The full court press”? Can you give any more context?

How to make long bracket screws for TV

Description : I want to hang the TV on the wall, I know I need to have a bracket according to VESA dimensions. But nowhere did I read about the length of the screws. Samsung TV.

Last Answer : When I bought the TV mount, there were dowels and screws. They should also advise you directly when selling the holder.

Cutting nails and screws

Description : How to store nails in the workshop so that they do not rust?

Last Answer : You have to preserve them. For example, oil. If you only need about 1 year, soak it in diesel and let it dry freely. It can be repeated after a year.

How to adjust screws against loosening.

Description : I have grilles mounted on the cottage but they have a hexagon so the screws can be loosened with a wrench. How to prevent permission?

Last Answer : Take a grinder and grind the hexagons into a round.

How to clean rusty nails and screws.

Description : What solution is it to throw in to get the rust here? It's not extra rusty.

Last Answer : You need to consider whether the rusting is worth it at all. At present, nails and screws with a stainless steel finish are available on the market, and there is plenty of everything. Otherwise, just soak in kerosene or diesel, or use a liquid cutter.

What are some real world examples of screws?

Description : What are some real world examples of screws?

Last Answer : A Jarlid

Besides grinding what are some other methods used to thread ball screws?

Description : Besides grinding what are some other methods used to thread ball screws?

Last Answer : Besides grinding, another method is recirculating ball nut and shaft assembly. This method rolled thread ball screws cost less than ground ball screws but deliver virtually the same accuracy and performance You used ... to have a die with the correct width and pitch (the angle of the threading).

Does the Razo RG8 JDM Digital car clock stick with suction, screws or glue?

Description : Does the Razo RG8 JDM Digital car clock stick with suction, screws or glue?

Last Answer : It uses a suctioning feature to attach it.

Why do you use brass screws?

Description : Why do you use brass screws?

Last Answer : fastener and even if it is designed to fasten wood to wood, it could also fasten sheet metal to wood.

Can I use my drill for screws and bolts?

Description : Can I use my drill for screws and bolts?

Last Answer : Yes.You just need the correct bit.Most drills won't have the torque to really tighten something that's difficult though.

Will Office Depot replace missing screws for my compact computer desk?

Description : Will Office Depot replace missing screws for my compact computer desk?

Last Answer : Sounds like you'll probably have to contact the manufacturer, or get the screws yourself at a local hardware store. Office Depot doesn't open the packages, so they wouldn't likely have spare screws available.

Removing Broken Screws With an Extractor?

Description : Removing Broken Screws With an Extractor?

Last Answer : Broken screws are incredibly frustrating to remove, especially when it's just the screw head that's broken off. Fortunately, screw extractors make this process as clean and simple as possible. A screw ... turn it counter-clockwise. The broken screw should, with a little effort, begin to slide out.

When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by _____________. A. knotting the cords together at the plugs B. taping the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Description : When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by ... the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Last Answer : Answer: D

The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Description : The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Last Answer : Answer: C

Set screws are subjected to tensile forces only. a) Yes b) No, they are subjected to compressive forces only c) Both compressive and tensile d) Can’t be determined

Description : Set screws are subjected to tensile forces only. a) Yes b) No, they are subjected to compressive forces only c) Both compressive and tensile d) Can’t be determined

Last Answer : b) No, they are subjected to compressive forces only

Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Description : Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Last Answer : b. Set screws

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it satisfactorily (C) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Description : Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it ... ) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Last Answer : (D) All the above

Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) Mandrels, twist drills, small lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Last Answer : (A) Small punches, broaches reamers and springs

Screws are specified by their __________ diameters. (A) Minor (B) Major (C) Pitch (D) None of these

Description : Screws are specified by their __________ diameters. (A) Minor (B) Major (C) Pitch (D) None of these

Last Answer : (B) Major

What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Description : What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Last Answer : The heating and cooling cycles.

The number of damaged gingival tissues after placing rubber dam is greater if: A. The distance between holes is too big B. The distance between holes is too small C. The punctured holes are too big in size D. Not using lubricant when placing rubber dams

Description : The number of damaged gingival tissues after placing rubber dam is greater if: A. The distance between holes is too big B. The distance between holes is too small C. The punctured holes are too big in size D. Not using lubricant when placing rubber dams

Last Answer : B. The distance between holes is too small

Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Description : Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Last Answer : Answer : B

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : Motherboard

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : d. Breadboard

Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Description : Personal computers use a number of chips mounted on a main circuit board. What is the common name for such boards? a. Daughter board b. Motherboard c. Father board d. Breadboard

Last Answer : b. Motherboard

Do you think Man's propensity for placing blame is instinctive?

Description : Do you think Man's propensity for placing blame is instinctive?

Last Answer : Nah, it’s probably all your fault. ~

Placing someone under citizen's arrest for trespassing in Florida?

Description : Placing someone under citizen's arrest for trespassing in Florida?

Last Answer : so what about if you have a gun and shoot them, you are on your property and the are trespassing, rose bushes injuries are worse??? BTW Don’t shoot them! It was just an example

Do you have a predominantly Afro-centric conception of black people's historical placing in the world?

Description : Do you have a predominantly Afro-centric conception of black people's historical placing in the world?

Last Answer : answer:I am not African, or descendants of folks from Africa (that I know of), and was raised with a primarily Caucasian and Native American (Ojibwe and Mi'kmaq) -centric view of the world, so no ... Civil War and an effort was made to show things from their eyes at the time which also helped.

If you enjoy sports, does placing a bet on a particular game or individual enhance your enjoyment or leave you too nervous of the outcome?

Description : If you enjoy sports, does placing a bet on a particular game or individual enhance your enjoyment or leave you too nervous of the outcome?

Last Answer : I grew up in Vegas and was surrounded by gambling, so I never really had a desire to gamble as I grew older. I did play the slots once in Lake Tahoe when I was 20. I ended up winning $250 and had ... and was the only person in our group that could claim the prize. I was lucky I didn't get caught!

How do you, if at all, avoid others placing their gender norms on your children?

Description : How do you, if at all, avoid others placing their gender norms on your children?

Last Answer : I would support my future-children in whatever they choose to do, but I hope that my sons are very masculine and my daughters are very feminine . you know, the football player son and the cheerleader daughter. I ... 't want to play sports and my son isn't artsy. But like I said, it's their choice.

Why are people so obsessed with placing people who are innately talented or gifted in some way on a pedestal?

Description : Why are people so obsessed with placing people who are innately talented or gifted in some way on a pedestal?

Last Answer : I might question the term obsessed but I think it is natural to admire people who have skills, abilities and achievements we would like to have. They may inspire us to carry on when we run ... has a particular quality that is admired, they will be exceptional people in every part of their lives.

When placing an indoor tv antenna do you point it in the direction of the nearest cable towers or in the direction of the nearest window/door to get best reception?

Description : When placing an indoor tv antenna do you point it in the direction of the nearest cable towers or in the direction of the nearest window/door to get best reception?

Last Answer : Though I'm no expert in the field, I've worked closely with guys that study wave propagation. They often told me that in urban environments radio waves do some really bizarre things. A nearby chain-link ... you shall have to do the old trial & error trick to find where you get the best reception.

how far apart should Austrian Pines e planted, when placing in rows

Description : how far apart should Austrian Pines e planted, when placing in rows

Last Answer : Need Answer

Placing Poinsettias outside

Description : Placing Poinsettias outside

Last Answer : Need Answer

15. An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object is formed on the screen. What is the focal length of the conve -Chemistry-10

Description : 15. An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object is formed on the screen. What is the focal length of the conve -Chemistry-10

Last Answer : Since, object-screen distance is double of object-lens separation, the object is at a distance of 2f from the lens and the image should be of the same size of the object.

one method of restraining a goat is by placing it -General Knowledge

Description : one method of restraining a goat is by placing it -General Knowledge

Last Answer : One method of restraining a goat is by placing it on its side.

Shanti Sweets Stall was placing an order for making cardboard boxes for packing their sweets. -Maths 9th

Description : Shanti Sweets Stall was placing an order for making cardboard boxes for packing their sweets. -Maths 9th

Last Answer : Let l, b and h be the length, breadth and height of the box. Bigger Box: l = 25cm b = 20 cm h = 5 cm Total surface area of bigger box = 2(lb+lh+bh) = [2(25 20+25 5+20 5)] ... (546000 4)/1000 = Rs. 2184 Therefore, the cost of cardboard required for supplying 250 boxes of each kind will be Rs. 2184.

An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object is formed on the screen. What is the focal length of the convex lens and size of the image formed on the screen? Draw a ray diagram to show the formation of the image in this position of the object with respect to the lens. -Physics

Description : An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object ... diagram to show the formation of the image in this position of the object with respect to the lens. -Physics

Last Answer : Since, object-screen distance is double of object-lens separation, the object is at a distance of 2f from the lens and the image should be of the same size of the object.