Cutting nails and screws

How to store nails in the workshop so that they do not rust?
by

1 Answer

Answer :

You have to preserve them. For example, oil. If you only need about 1 year, soak it in diesel and let it dry freely. It can be repeated after a year.
by

Related questions

How to clean rusty nails and screws.

Description : What solution is it to throw in to get the rust here? It's not extra rusty.

Last Answer : You need to consider whether the rusting is worth it at all. At present, nails and screws with a stainless steel finish are available on the market, and there is plenty of everything. Otherwise, just soak in kerosene or diesel, or use a liquid cutter.

What are the rules for cutting nails ?

Last Answer : Nail cutting rules! There is a lot of danger in cutting nails. Sometimes the soft skin under the nails becomes unprotected due to cutting the nails too deep , sometimes the corners of the nails can ... take help of someone while cutting their nails. Use small nail clippers to cut children's nails.

How to keep the screws in the holes on the bottom of my laptop?

Description : How to keep the screws in the holes on the bottom of my laptop?

Last Answer : You can, of course, use tape or superglue, but if it were my laptop, I’d try to get the manufacturer, dealer or a repairer to replace the screws with ones that stayed screwed in, as they’re supposed to be.

Is there such thing as clear plastic tapping screws?

Description : Is there such thing as clear plastic tapping screws?

Last Answer : I doubt that plastic is strong enough to make a tapping screw. It would have to be at least as strong as brass (which is a relatively soft metal).

How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Description : How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Last Answer : answer:Welcome to Fluther. I don't know about anyone else, but I have no idea what you're talking about. I don't know what a balisong is, in the first place, but even more important (to me ... helpful. We try to be helpful, but contrary to some expectations we cannot read minds as a general rule.

How do I unscrew these (laptop) screws I can't get a grip on?

Description : How do I unscrew these (laptop) screws I can't get a grip on?

Last Answer : tip of a strong sharp knife, but it may bent the knife. Jewlers screwdriver set at Radio shack or walmart are inexpensive

What is the glue on computer screws called?

Description : What is the glue on computer screws called?

Last Answer : answer:It’s Loctite. Specifically, the blue stuff, which I see most often, is this one but there are different strengths and applications.

How can I remove 4 stripped screws from computer panel without damaging computer, including threading?

Description : How can I remove 4 stripped screws from computer panel without damaging computer, including threading?

Last Answer : Go to the hardware store and get a reverse-tap drill bit. It’ll work like a charm.

Why do they make flat head and philips screws? Why not just have one type?

Description : Why do they make flat head and philips screws? Why not just have one type?

Last Answer : to annoy me. today at work i took out these phillips screws holding on a piece of paneling then half an inch under it was a flathead screw to attach the power wires….wtf the toolbox was so far away

We all know that Britney Spears, has some screws loose. Does anyone think she has some sort of mental illness? Will she ever get a grip? Or is she just too closely scrutinized?

Description : We all know that Britney Spears, has some screws loose. Does anyone think she has some sort of mental illness? Will she ever get a grip? Or is she just too closely scrutinized?

Last Answer : Leave the poor woman alone. If I had every single detail of my life out in the public eye, I’d go crazy too.

I am looking for a commonly used phrase for putting pressure on someone. Like "put the heat on" or "put the screws to." i'm sure there are more polite ways to say this colloquially. How?

Description : I am looking for a commonly used phrase for putting pressure on someone. Like "put the heat on" or "put the screws to." i'm sure there are more polite ways to say this colloquially. How?

Last Answer : “The full court press”? Can you give any more context?

How to make long bracket screws for TV

Description : I want to hang the TV on the wall, I know I need to have a bracket according to VESA dimensions. But nowhere did I read about the length of the screws. Samsung TV.

Last Answer : When I bought the TV mount, there were dowels and screws. They should also advise you directly when selling the holder.

How to adjust screws against loosening.

Description : I have grilles mounted on the cottage but they have a hexagon so the screws can be loosened with a wrench. How to prevent permission?

Last Answer : Take a grinder and grind the hexagons into a round.

What are some real world examples of screws?

Description : What are some real world examples of screws?

Last Answer : A Jarlid

What are the number of Minimum screws required to for placing the motherboard?

Description : What are the number of Minimum screws required to for placing the motherboard?

Last Answer : 6

Besides grinding what are some other methods used to thread ball screws?

Description : Besides grinding what are some other methods used to thread ball screws?

Last Answer : Besides grinding, another method is recirculating ball nut and shaft assembly. This method rolled thread ball screws cost less than ground ball screws but deliver virtually the same accuracy and performance You used ... to have a die with the correct width and pitch (the angle of the threading).

Does the Razo RG8 JDM Digital car clock stick with suction, screws or glue?

Description : Does the Razo RG8 JDM Digital car clock stick with suction, screws or glue?

Last Answer : It uses a suctioning feature to attach it.

Why do you use brass screws?

Description : Why do you use brass screws?

Last Answer : fastener and even if it is designed to fasten wood to wood, it could also fasten sheet metal to wood.

Can I use my drill for screws and bolts?

Description : Can I use my drill for screws and bolts?

Last Answer : Yes.You just need the correct bit.Most drills won't have the torque to really tighten something that's difficult though.

Will Office Depot replace missing screws for my compact computer desk?

Description : Will Office Depot replace missing screws for my compact computer desk?

Last Answer : Sounds like you'll probably have to contact the manufacturer, or get the screws yourself at a local hardware store. Office Depot doesn't open the packages, so they wouldn't likely have spare screws available.

Removing Broken Screws With an Extractor?

Description : Removing Broken Screws With an Extractor?

Last Answer : Broken screws are incredibly frustrating to remove, especially when it's just the screw head that's broken off. Fortunately, screw extractors make this process as clean and simple as possible. A screw ... turn it counter-clockwise. The broken screw should, with a little effort, begin to slide out.

When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by _____________. A. knotting the cords together at the plugs B. taping the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Description : When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by ... the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Last Answer : Answer: D

The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Description : The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Last Answer : Answer: C

Set screws are subjected to tensile forces only. a) Yes b) No, they are subjected to compressive forces only c) Both compressive and tensile d) Can’t be determined

Description : Set screws are subjected to tensile forces only. a) Yes b) No, they are subjected to compressive forces only c) Both compressive and tensile d) Can’t be determined

Last Answer : b) No, they are subjected to compressive forces only

Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Description : Which type of screw fasteners are threaded through out its length? a. Cap screws b. Set screws c. Studs d. Tap bolt

Last Answer : b. Set screws

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it satisfactorily (C) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Description : Pick up the correct statement from the following: (A) It is difficult to eliminate an error completely at first trial (B) Instability of the instrument makes it almost impossible to adjust it ... ) Adjustment screws must be left bearing firmly but should never be forced (D) All the above

Last Answer : (D) All the above

Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) Mandrels, twist drills, small lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Description : Which of the following are made out of the carbon steel having carbon content of 0.9 to 1%? (A) Small punches, broaches reamers and springs (B) Cutlery, screws, rivets and files (C) ... lathe tools and razors (D) Forgings like can shaft, structural steel plate, threading dies and drawing dies

Last Answer : (A) Small punches, broaches reamers and springs

Screws are specified by their __________ diameters. (A) Minor (B) Major (C) Pitch (D) None of these

Description : Screws are specified by their __________ diameters. (A) Minor (B) Major (C) Pitch (D) None of these

Last Answer : (B) Major

What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Description : What causes the nuts or screws that hold the tips on soldering irons and guns to loosen?

Last Answer : The heating and cooling cycles.

Do short painted nails look good on senior women?

Description : Do short painted nails look good on senior women?

Last Answer : Sure, why not? Why do you ask?

What's the English (and by English I don't necessarily mean UK), term for trimming cats' nails?

Description : What's the English (and by English I don't necessarily mean UK), term for trimming cats' nails?

Last Answer : It’s called “declawing.”

Why are my thumb nails hard but my other nails so very thin?

Description : Why are my thumb nails hard but my other nails so very thin?

Last Answer : The difference is evolution. Thumbs (and thumbnails) played a more essential role in food gathering, food opening, and similar survival-type functions than they do today. You must have inherited a strong-thumbnail gene from your Neanderthal predecessors.

Is there a trick to having thick nails that don't break and peel?

Description : Is there a trick to having thick nails that don't break and peel?

Last Answer : genetics. If thin nails are the worst handicap to befall you in the genepool lottery, you’re a big winner.

How do you clip your nails?

Description : How do you clip your nails?

Last Answer : I generally use a nail clipper.

Does your dog allow you to trim its nails and do you do it or take it to a vet?

Description : Does your dog allow you to trim its nails and do you do it or take it to a vet?

Last Answer : My dog would allow it but he didn’t like it. I would roll him onto his back and straddle him to do the job.

How long do I let the liquid nails dry?

Description : How long do I let the liquid nails dry?

Last Answer : answer:Everything I read says 1-2 days but this contractor who uses it on all his installs offers this awsome tip which should speed things up for you . The proper way to apply wood to wood without ... wood pieces together and you will find they stick so well that you can not pull them back apart.

What is the best, safest way to dispose of boxes of nails?

Description : What is the best, safest way to dispose of boxes of nails?

Last Answer : Thank you for not wanting to put them in the garbage. Anything metal can be recycled. There are several options. One is to track down a metal scrapper. Another is to contact a local recycling center. It requires more work on your end, but it’s the right thing to do.

I dyed my hair pink but it stained my nails! How do I get it removed?

Description : I dyed my hair pink but it stained my nails! How do I get it removed?

Last Answer : They should grow completely out in about six months if all else fails. In the meantime, you are color-coordinated. Paint your toenails a matching pink.

How do I deal with split nails?

Description : How do I deal with split nails?

Last Answer : Are your nails somewhat brittle as well? I have applied A&D Ointment and used those teeny adhesive nail strippy things to lubricate the nails and keep them from splitting along the ridges. Probably surgical ... sorry, I don't remember what the strippy things are called. The A&D ointment is magic!

What's the best way to cut the nails of an insane cat?

Description : What's the best way to cut the nails of an insane cat?

Last Answer : Take her to the vet. The stress alone, at age 20 is not good. The vet will do it in, one toe at a time, increments. Or…you do the same. Clip ONE claw, let her rest for awhile, rinse and repeat.

Dads, do you know how to paint your little girls nails?

Description : Dads, do you know how to paint your little girls nails?

Last Answer : Sorry, not a dad, a mom but couldn't resist tossing in some humor here. :-p My ex actually said to me once when our daughter was about 4, sure, she's cute, but what am I supposed to DO with ... guitar at 11 for her dad to want to jump in and teach her how to play some mean Led Zeppelin. lol

Do you like having long nails?

Description : Do you like having long nails?

Last Answer : (Guy here) I don’t find them at all attractive. In general, when I see that a person has somehow hobbled him- or herself for the sake of appearance (e.g. long nails, stiletto heels, bum-baring pants, etc.), that’s a red flag that the person’s priorities are way different from mine.

What color nails is the best for this outfit?

Description : What color nails is the best for this outfit?

Last Answer : Red seems the most obvious.

Why do I bite my nails/lip/cheeks?

Description : Why do I bite my nails/lip/cheeks?

Last Answer : It could be a sign of anxiety or stress. When I was little I knew this girl who always bit her nails up to the point that they bled, and she eventually got taken to a doctor who prescribed this weird stuff ... know what to do about it if this truly bothers you, and you want to put an end to it.

How to help hang nails?

Description : How to help hang nails?

Last Answer : Use a sharp cuticle clippers, such as this. Clip gently..Keep at it.

Do most women in the area you live in have their nails long and manicured?

Description : Do most women in the area you live in have their nails long and manicured?

Last Answer : Not here. Strangely, it seems that secretaries often have the longest nails of the people I see. I always wonder how it affects their typing.

Should I try to keep my 4 year old from biting her nails?

Description : Should I try to keep my 4 year old from biting her nails?

Last Answer : I think… good luck. As a person who bite my nails as a child, it would have taken binding my hands behind my back 24 hours a day to actually stop me.

Do you prefer long nails or short on a woman?

Description : Do you prefer long nails or short on a woman?

Last Answer : answer:I’m a woman, and here are my preferences: Short (not to exceed the tip of the finger) Fake nails are not appealing to me Clear (or very light pink) polish; though a light color now and then is nice! Squared

I have a job interview tomorrow and I am trying to decide if it looks more professional to paint my nails?

Description : I have a job interview tomorrow and I am trying to decide if it looks more professional to paint my nails?

Last Answer : Clear would be better , but clean would be best.