FOR HOW MANY HOURS DOES THE FORCED AIR PROPANE MH35FA WORKS?

FOR HOW MANY HOURS DOES THE FORCED AIR PROPANE MH35FA WORKS?
by

1 Answer

Answer :

It lasts around 10-12 hours on a 20lb propane tank.
by

Related questions

My air conditioning motor broke. The repairman told me propane gas was more acidic than natural gas and was the cause of the breakdown. Is this true?

Description : My air conditioning motor broke. The repairman told me propane gas was more acidic than natural gas and was the cause of the breakdown. Is this true?

Last Answer : Propane gas is more acidic then natural gas, and could of caused the breakdown but propane is also cheaper then natural gas and lasts longer. Natural gas is also considered the "greener" choice.

Do propane tanks have air valves?

Description : Do propane tanks have air valves?

Last Answer : It doesn't look like they do. When you search for "propane tanks" "air valves" (both quoted), the low number of results suggests they don't go together. A propane valve is slightly different ... must be depressed before gas will flow. Valves for non-flammable gas don't generally have this feature.

Pick out the wrong statement. (A) Main constituents of LPG are propane and butane (B) C.V. of natural gas is about 10000 KCal/Nm3 (C) C.V. of LPG is about 26000 kcal/Nm3 (11500 kcal/kg)(D) L.P.G. is lighter than air

Description : Pick out the wrong statement. (A) Main constituents of LPG are propane and butane (B) C.V. of natural gas is about 10000 KCal/Nm3 (C) C.V. of LPG is about 26000 kcal/Nm3 (11500 kcal/kg) (D) L.P.G. is lighter than air

Last Answer : (D) L.P.G. is lighter than air

How do I ask my employer why I wasn't paid for actual time worked? I'm not salaried, i'm a LPN who constantly works OT and has yet to see my check/time card reflect my actual hours worked!! I'm getting gyped, how do I resolve this without losing my job?

Description : How do I ask my employer why I wasn't paid for actual time worked? I'm not salaried, i'm a LPN who constantly works OT and has yet to see my check/time card reflect my actual hours worked!! I'm getting gyped, how do I resolve this without losing my job?

Last Answer : And is your overtime schedule and pay schedule synched up, so that you are actually working overtime? I would keep track of your time on your own, and talk to payroll. How long have you had this job, and is this a new problem?

Who works how many hours a week on average?

Description : Who works how much time a week? I’ve noticed that almost everyone has more than the classic 40 hours a week.

Last Answer : I only work part-time at school, 8-10 hours a week :)

How much money will James make in a 4 week period at a video store if he makes 6.20 per hour and works 30 hours each week?

Description : How much money will James make in a 4 week period at a video store if he makes 6.20 per hour and works 30 hours each week?

Last Answer : $6.20 x 30 x 4 = $744.00

Do employment agencies get paid by the hours the employee works?

Description : Do employment agencies get paid by the hours the employee works?

Last Answer : Generally, recruiters get about 10-20% of the first year's salary for the employee.

Out of 24 hours the human heart works, ventricles contact for (a) 6 hours (b) 9 hours (c) 11 hours (d) 12 hours

Description : Out of 24 hours the human heart works, ventricles contact for (a) 6 hours (b) 9 hours (c) 11 hours (d) 12 hours

Last Answer : Ans:(b)

What are the advantages and disadvantages of forced air heat, vs. hot water, vs. steam?

Description : What are the advantages and disadvantages of forced air heat, vs. hot water, vs. steam?

Last Answer : With forced air, you can install ducts of sufficient size so that they can share cooling duty in the Summer, but some people find them drafty. I think circulating hot water is easier to plumb ... is necessary.) The main thing is to install a very efficient furnace, and to insulate properly.

The maximum volume of air a person can breathe in after a forced a expiration is `:-`

Description : The maximum volume of air a person can breathe in after a forced a expiration is `:-`

Last Answer : The maximum volume of air a person can breathe in after a forced a expiration is `:-` A. TV `+`ERV B. TV `=` IRV C. TV `+` ERV `+` IRV D. ERV `+` RV

A person breathes in somme volume of air by forced inspiration after having a forces expiration. This quantity of air taken in is

Description : A person breathes in somme volume of air by forced inspiration after having a forces expiration. This quantity of air taken in is

Last Answer : A person breathes in somme volume of air by forced inspiration after having a forces expiration. ... volume C. Vital capacity D. Inspiratory capacity

Total volume of air accommodate in the lungs at the end of forced inspiration `:-`

Description : Total volume of air accommodate in the lungs at the end of forced inspiration `:-`

Last Answer : Total volume of air accommodate in the lungs at the end of forced inspiration `:-` A. TV `+` IRV B. TV `+` IRV ... `+` ERV D. TV `+` IRV`+` ERV`+` RV

Radiant Heaters More Energy Efficient Than Forced Air Heat?

Description : Radiant Heaters More Energy Efficient Than Forced Air Heat?

Last Answer : Radiant heaters supply heat directly to the ceiling, floor or walls of a home. They use radiant heat transfer, which is heat moving directly from the hot surface to the objects or people in the room. ... lost in the duct work. Since there is no moving air, it is better for people with Allergies.

Supercharging is the process of a. supplying the engine with air at a density greater than the density of the surrounding atmosphere b. providing forced cooling air c. injecting excess fuel d. raising the exhaust pressure

Description : Supercharging is the process of a. supplying the engine with air at a density greater than the density of the surrounding atmosphere b. providing forced cooling air c. injecting excess fuel d. raising the exhaust pressure

Last Answer : ANSWER a. supplying the engine with air at a density greater than the density of the surrounding atmosphere

Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Description : Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Last Answer : ANSWER d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

When the temperature and humidity of air is low, we usually use __________ draft cooling tower. (A) Natural (B) Forced (C) Induced (D) None of these

Description : When the temperature and humidity of air is low, we usually use __________ draft cooling tower. (A) Natural (B) Forced (C) Induced (D) None of these

Last Answer : (A) Natural

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction(B) Natural convection(C) Forced convection(D) None of these

Description : Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction (B) Natural convection (C) Forced convection (D) None of these

Last Answer : (B) Natural convection

In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Description : In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Last Answer : (C) Positive pressure exists in the furnace

Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering troubles on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportion of iron & sulphur (B) Low forced draft & fuel bed temperature (C) Thick firebed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Description : Which of the following accentuates clinkering trouble on furnace grate burning coal? (A) Low reactivity of carbonised residue containing high proportions of iron & sulphur (B) Low forced draught and fuel bed temperature (C) Thick fire bed and preheated primary air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Description : The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Last Answer : Answer: Option B

Why is induced draught considered better than the forced draught? a) Because power requirement is high for forced draught b) Maintenance of induced draught fan is costlier c) Forced draught is less efficient d) Forced draught produces less amount of speed of air

Description : Why is induced draught considered better than the forced draught? a) Because power requirement is high for forced draught b) Maintenance of induced draught fan is costlier c) Forced draught is less efficient d) Forced draught produces less amount of speed of air

Last Answer : Because power requirement is high for forced draught

The movement of air mass in the case of Tornado can be described as : (a) Forced vortex throughout (b) free vortex throughout (c) Forced vortex at the core and free vortex outside (d) Free vortex at the core and forced vortex outside

Description : The movement of air mass in the case of Tornado can be described as : (a) Forced vortex throughout (b) free vortex throughout (c) Forced vortex at the core and free vortex outside (d) Free vortex at the core and forced vortex outside

Last Answer : (c) Forced vortex at the core and free vortex outside

The current zero interruption, in oil and air blast circuit breakers, is achieved by (a) lengthening of the gap (b) cooling and blast effect (c) both (a) and (b) (d) deionizing the oil with forced air (e) none of the above

Description : The current zero interruption, in oil and air blast circuit breakers, is achieved by (a) lengthening of the gap (b) cooling and blast effect (c) both (a) and (b) (d) deionizing the oil with forced air (e) none of the above

Last Answer : (c) both (a) and (b)

The forced oil and air circulation method is usual one for transformers of capacities (a) upto 5 MVA (b) upto 10 MVA (c) upto 20 MVA (d) 30 MVA upwards

Description : The forced oil and air circulation method is usual one for transformers of capacities (a) upto 5 MVA (b) upto 10 MVA (c) upto 20 MVA (d) 30 MVA upwards

Last Answer : (d) 30 MVA upwards