Can a car amplifier be mounted in the trunk?

Can a car amplifier be mounted in the trunk?
by

1 Answer

Answer :

Yes. Some car amplifiers can be mounted in the trunk.
by

Related questions

What's in the trunk/boot of your car?

Description : What's in the trunk/boot of your car?

Last Answer : Right now…golf bag

Is there a car that you would prefer to see the license plate positioned on the trunk lid rather than the bumper, or vice versa?

Description : Is there a car that you would prefer to see the license plate positioned on the trunk lid rather than the bumper, or vice versa?

Last Answer : IMO it take away from the asthetics of the car to have the licence on the trunk.

What is one item, in the trunk of your car, that you absolutely could not do without?

Description : What is one item, in the trunk of your car, that you absolutely could not do without?

Last Answer : I keep random bottles of various car fluids in my trunk like washer fluid, antifreeze etc. I just don’t want to run out of some fluid one day, so I have most of them in the trunk to replace right when it runs out.

What is in your car trunk right now?

Description : What is in your car trunk right now?

Last Answer : Two glow sticks. One pizza box. A rake. A over-sized box of ready-to-make egg drop soup. Some duct tape. I even think there is some Halloween candy tucked in the crevices.

While driving a rental car, you are directed to pull over at a routine sobriety check point. The police dog barks at the trunk of the car. When the trunk is opened, a kilo of cocaine is inside that you knew nothing about. How do you explain your way out of this?

Description : While driving a rental car, you are directed to pull over at a routine sobriety check point. The police dog barks at the trunk of the car. When the trunk is opened, a kilo of cocaine is inside that you knew nothing about. How do you explain your way out of this?

Last Answer : Silence. Talking to the police isn't going to help one bit. Let the lawyer talk

Does anyone know of an economical way to ship a car and trunk load of belongings from the west coast to Ohio?

Description : Does anyone know of an economical way to ship a car and trunk load of belongings from the west coast to Ohio?

Last Answer : There used to be an agency in the bay area that coupled cars which needed to be driven somewhere with riders/drivers that had to reach the same destination. Can’t recall the name of the agency, but if you did a bit of googlng you may be able to fnd it.

Is there a way to unlock the trunk release from under the car without keys?

Description : Is there a way to unlock the trunk release from under the car without keys?

Last Answer : The year, make and model info would be useful but with some vehicles you can gain access to the trunk by removing the back seat.

When did matchbooks start having the striking surface mounted on the back side of the cover?

Description : When did matchbooks start having the striking surface mounted on the back side of the cover?

Last Answer : answer:I don’t think that I noticed that as a general rule until much later – maybe the mid-to-late 80s. Perhaps the ones you saw in the 60s were the innovators who realized that, whatever the tiny decrease in convenience, the increase in safety far outweighed that.

Why is the toilet paper almost always mounted on the wall to the left of the toilet?

Description : Why is the toilet paper almost always mounted on the wall to the left of the toilet?

Last Answer : answer:It’s a secret attempt to create a habit of turning towards the left in an attempt to get people to lean more left in the politics. Honestly, I just sat here trying to identify all of the toilets I visit. I think most of them have the tp mounted on the right.

Bin Laden: did the Navy Seals have cameras mounted on their helmets?

Description : Bin Laden: did the Navy Seals have cameras mounted on their helmets?

Last Answer : answer:Yes they did. It was said somewhere in the reports that the president and his team watched the raid live (after some transmission errors). The Freedom of Information Act can be ignored in some ... -growing list of locations/hard-drives/etc that they are stored on. They'll come out eventually.

External-mounted DSL POTS Splitter?

Description : External-mounted DSL POTS Splitter?

Last Answer : answer:It's just like installing a phone jack, very, very simple. There's no soldering or anything else fancy, you simple strip the ends of wires bare and connect them to screw terminals. ... .com/diy-home-improvement/electrical-and-lighting/how-to-install-a-phone-jack/ Welcome to ask-public!

Keep a samba share mounted in Fedora 11?

Description : Keep a samba share mounted in Fedora 11?

Last Answer : Does the share disappear because you are shutting down one of the computers? Or does it just do it by itself?

Can you still use a wood burning fireplace if you have a television set mounted on the wall over it?

Description : Can you still use a wood burning fireplace if you have a television set mounted on the wall over it?

Last Answer : @Gimme, I know nothing about the fireplace, but what in the world are you doing up so early?

The McDonald's Fillet of Fish commercial with the singing mounted fish...Is it driving you crazy or what?

Description : The McDonald's Fillet of Fish commercial with the singing mounted fish...Is it driving you crazy or what?

Last Answer : Hate it also. Want to smack the shit out of whoever came up with it.

How can I get the sound channels to work when I'm playing a mounted DVD .ISO file?

Description : How can I get the sound channels to work when I'm playing a mounted DVD .ISO file?

Last Answer : Odd. What's mplayer tell you the audio/video is encoded as?

Wall Mounted Flatscreen- good idea or bad in earthquake prone San Francisco?

Description : Wall Mounted Flatscreen- good idea or bad in earthquake prone San Francisco?

Last Answer : I’m sure it’ll be ok if it’s mounted properly. And if an earthquake strong enough to knock it off it’s mounting occurs, my bet is that there will be more damage to worry about than the television.

A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

Can I just repot my staghorn fern, or does it have to be mounted to servive.

Description : Can I just repot my staghorn fern, or does it have to be mounted to servive.

Last Answer : Need Answer

Horse statue - mounted man - on two legs - how man die?

Description : Horse statue - mounted man - on two legs - how man die?

Last Answer : Killed in Battle

A device mounted on the injection pump which is use to lift fuel from the tank to the injection system?

Description : A device mounted on the injection pump which is use to lift fuel from the tank to the injection system?

Last Answer : Electric fuel pumps

Does the vga need to be mounted on the motherboard? Is there anything you can do about it?

Description : Does the vga need to be mounted on the motherboard? Is there anything you can do about it? Pumpkin no matter what the motherboard is like?

Last Answer : After all, yes. It wasn’t so clear when there were even AGP-coupled video cards. Since there are only PCI Express cards available today, you can’t really ignore it. Although there are 2.0, 3.0, etc. of these. I don't know how to pay attention to this.     

1. A collection of dried plant specimen that are pressed, treated and mounted on a standard size sheet in order to preserve it. 

Description : 1. A collection of dried plant specimen that are pressed, treated and mounted on a standard size sheet in order to preserve it. 

Last Answer : Name the following. 1. A collection of dried plant specimen that are pressed, treated and ... and animals which is based on contrasting characters.

How much weight can the average wall mounted organizer hold?

Description : How much weight can the average wall mounted organizer hold?

Last Answer : It depends on how strong your walls are and where you mount the organizer. If the organizer is made for tools in the garage, it will be much stronger than a small wall cubby made for decor.

Can computer monitors be mounted on the wall like they do TVs Do any come with mounts?

Description : Can computer monitors be mounted on the wall like they do TVs Do any come with mounts?

Last Answer : Yes, there are Computer Monitors especially made to be mounted on the wall, there is also brackets available to mount your monitor onto the wall, and you can even hook your computer up to a tv you have mounted on the wall if you have the right connection adapter.

What computer monitor can be wall mounted?

Description : What computer monitor can be wall mounted?

Last Answer : The Viewsonic VX2255wmp can be wall mounted if you prefer.

Can a Garmin Nuvi 765T Auto / Road GPS be mounted on a bicycle?

Description : Can a Garmin Nuvi 765T Auto / Road GPS be mounted on a bicycle?

Last Answer : Yes it is small enough to be mounted on a bike.

Does the tilt mount need to be mounted on studs Or is anywhere on the wall fine?

Description : Does the tilt mount need to be mounted on studs Or is anywhere on the wall fine?

Last Answer : Peerless-ST640-Smartmount-Universal-Tilt-Mount can be fitted anywhere on the wall with the help of the stud it is provided with. The studs are needed to mount it on the wall, anywhere.

What is the total weight that comes with this stand can it be mounted to the floor?

Description : What is the total weight that comes with this stand can it be mounted to the floor?

Last Answer : 210 lbs. Is not floor mountable.

Can this microwave be mounted as well as a stand alone?

Description : Can this microwave be mounted as well as a stand alone?

Last Answer : The Amana Radarange Microwave oven, is designed only for counter top use.

Do they make LED TV's that pivot when mounted on a wall?

Description : Do they make LED TV's that pivot when mounted on a wall?

Last Answer : Almost any type of LED TV can be mounted on the wall. A pivoted mount is required, but that can easily be bought online. Make sure the pivot is compatible with the TV.

How to Hide Wall Mounted TV Wires ?

Description : How to Hide Wall Mounted TV Wires ?

Last Answer : Many men and women have chosen to use a wall mount in order to hang their TV. This is mainly because using a wall mount can clear up a lot of floor space. In addition, it offers a larger viewing ... SystemsIf you do not want to use cable covers with your wall mounted TV, you can always use an insid

In a bullfight, what is the mounted man with a lance called?

Description : In a bullfight, what is the mounted man with a lance called?

Last Answer : A picador

Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Description : Personal computers used a number of chips mounted on a main circuit board. What is the common name for such boards? A) Daughterboard B) Motherboard C) Father board D) Childboard

Last Answer : Answer : B

In most IBM PCs, the CPU, the device drives, memory expansion slots and active components are mounted on a single board. What is the name of this board? A) Motherboard B) Breadboard C) Daughter board D) Grandmother board

Description : In most IBM PCs, the CPU, the device drives, memory expansion slots and active components are mounted on a single board. What is the name of this board? A) Motherboard B) Breadboard C) Daughter board D) Grandmother board

Last Answer : Answer : A

In most of the IBM PCs, the CPU, the device drivers, memory, expansion slots and active components are mounted on a single board. What is the name of the board? A) Motherboard B) Daughterboard C) Bredboard D) Fatherboard

Description : In most of the IBM PCs, the CPU, the device drivers, memory, expansion slots and active components are mounted on a single board. What is the name of the board? A) Motherboard B) Daughterboard C) Bredboard D) Fatherboard

Last Answer : Answer : A

Receptacle outlets aboard ship should be designed so those mounted according to 46 CFR 111 have _____________. A. there must be a sufficient number of receptacle outlets in the crew accommodations for an adequate level of habitability B. each receptacle outelt must be compatible with the voltage and current of the circuit in which it is installed C. a receptacle outlet must not have any exposed parts with the plug opening uncovered D. all of the above

Description : Receptacle outlets aboard ship should be designed so those mounted according to 46 CFR 111 have _____________. A. there must be a sufficient number of receptacle outlets in the crew accommodations for an ... outlet must not have any exposed parts with the plug opening uncovered D. all of the above

Last Answer : Answer: D

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left Side .045 - .047 , Bottom .045 - .041 Which of the fo A. The aft bearing should be realigned or replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

Motor controllers are seldom troubled by grounds because ________________. A. cabinet heaters always keep internal components dry B. special insulation is used on wire for vital circuits C. shock mounts on controller panels greatly reduce vibration D. contactors and relays are mounted on nonconducting panels

Description : Motor controllers are seldom troubled by grounds because ________________. A. cabinet heaters always keep internal components dry B. special insulation is used on wire for vital circuits C. ... on controller panels greatly reduce vibration D. contactors and relays are mounted on nonconducting panels

Last Answer : Answer: D

When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent mechanical damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Description : When a solid-state component of an electronic circuit is mounted to a metallic mass, the general purpose of that mass is to ____________. A. prevent vibration damage to delicate components B. prevent ... damage to solid-state components C. dissipate stray magnetic currents D. act as a heat sink

Last Answer : Answer: D

Motor controllers are seldom troubled with grounds because _____________. A. the auxiliary contacts have a high resistance connection B. the contactors and relays are mounted on a nonconducting panel C. the resistor banks are composed of individual series-connected units D. there are separate switches for the motor and the control

Description : Motor controllers are seldom troubled with grounds because _____________. A. the auxiliary contacts have a high resistance connection B. the contactors and relays are mounted on a nonconducting panel ... individual series-connected units D. there are separate switches for the motor and the control

Last Answer : Answer: B

An electric tachometer receives the engine speed signal from a _______________. A. small generator mounted on the engine B. bimetallic sensing device C. stroboscopic sensing device D. vibrating reed meter generating a voltage proportionate to engine speed

Description : An electric tachometer receives the engine speed signal from a _______________. A. small generator mounted on the engine B. bimetallic sensing device C. stroboscopic sensing device D. vibrating reed meter generating a voltage proportionate to engine speed

Last Answer : Answer: A

Lightning rods must be mounted a top structure not less than ___ above the highest point. A. 10 cm B. 20 cm C. 30 cm D. 40 cm

Description : Lightning rods must be mounted a top structure not less than ___ above the highest point. A. 10 cm B. 20 cm C. 30 cm D. 40 cm

Last Answer : C. 30 cm

A ______ is essentially a cell site that is mounted on a flatbed tractor-trailer used for emergency purposes. A. COW B. BULL C. CALF D. PONY

Description : A ______ is essentially a cell site that is mounted on a flatbed tractor-trailer used for emergency purposes. A. COW B. BULL C. CALF D. PONY

Last Answer : A. COW

Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The clearance between the tank bottom and the bottom most impeller should be about (where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Description : Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The ... where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Last Answer : (B) D

Which one of the following parts of a ball bearing is mounted to the housing and is stationary? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Description : Which one of the following parts of a ball bearing is mounted to the housing and is stationary? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Last Answer : (b) Outer race

Which one of the following parts of a ball bearing is mounted on the rotating shafts and tends to rotate the shaft? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Description : Which one of the following parts of a ball bearing is mounted on the rotating shafts and tends to rotate the shaft? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Last Answer : (a) Inner race

The angular play bearing must be mounted without axial play. (a) Yes (b) Little tolerance is adjusted

Description : The angular play bearing must be mounted without axial play. (a) Yes (b) Little tolerance is adjusted

Last Answer : (a) Yes

The angular play bearing must be mounted without axial play. a) Yes b) Little tolerance is adjusted c) Little tolerance is necessary d) Can’t be stated

Description : The angular play bearing must be mounted without axial play. a) Yes b) Little tolerance is adjusted c) Little tolerance is necessary d) Can’t be stated

Last Answer : a) Yes

A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Description : A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Last Answer : A. 461.62 N