Are car insurance costs increasing or decreasing in this economy?

Are car insurance costs increasing or decreasing in this economy?
by

1 Answer

Answer :

Car insurance is increasing at a rate of 1.4% as of 2009.
by

Related questions

)Which of the following is NOT one of the primary needs for good project scheduling? 1. Cutting costs and reducing time 2. Decreasing the time required for decision making 3. Eliminating idle time 4. Developing better trouble shooting procedures.

Description : )Which of the following is NOT one of the primary needs for good project scheduling? 1. Cutting costs and reducing time  2. Decreasing the time required for decision making  3. Eliminating idle time  4. Developing better trouble shooting procedures.

Last Answer : 4. Developing better trouble shooting procedures.

The two sides of a tringle are increasing at the rate of 1/2 ft/sec with their included angle decreasing at the rate of π/90 rad/sec. What is the rate of change of area when the sides and the included angle are respectively 5 ft,8 ft, and 60°?

Description : The two sides of a tringle are increasing at the rate of 1/2 ft/sec with their included angle decreasing at the rate of π/90 rad/sec. What is the rate of change of area when the sides and the included angle are respectively 5 ft,8 ft, and 60°?

Last Answer : Area = (L1 L2) sin(angle) , where L1, L2 and and angle are functions of time t. Take the derivative using the multiplication rule. The derivative will equal (L1L2)(derivative of sin) + sin times ... will have to use the multiplication rule a second time to get the derivative of L1 L2. Good luck.

Citizen Rights... Individual Freedoms... In the past 50 years, are they increasing or decreasing?

Description : Citizen Rights... Individual Freedoms... In the past 50 years, are they increasing or decreasing?

Last Answer : answer:This has really changed so much because of the internet. We have so much access now to information and to freedom of speech, BUT, now, situations are occurring to curb the free flow of ... related Note: It takes a Brit National to make the point that Americans need to take note of.

If air resistance is neglected, at the mid-point of its swing, the acceleration of the bob of a simple pendulum along its path is always a.Increasing b.Zero c.A cycloid d.Decreasing e.A minimum but not equal to zero

Description : If air resistance is neglected, at the mid-point of its swing, the acceleration of the bob of a simple pendulum along its path is always a.Increasing b.Zero c.A cycloid d.Decreasing e.A minimum but not equal to zero

Last Answer : d. Decreasing

The ……………. tool is used in speadsheet that creates a growth series, wherein subseguent values follow an increasing or a decreasing geometric pattern. -Technology

Description : The ……………. tool is used in speadsheet that creates a growth series, wherein subseguent values follow an increasing or a decreasing geometric pattern. -Technology

Last Answer : The Source tool is used in spreadsheet that creates a growth series, wherein subsequent values follow an increasing or a decreasing geometric pattern.

Why are Corona cases increasing, and not decreasing?

Description : Why are Corona cases increasing, and not decreasing?

Last Answer : In my opinion, it is increasing because some people are not following the health protocols and that is, to wear face masks, do social distancing, etc. If people consider being having the safety of themselves and others, they should do these things.

Find the intervals in which the function `f(x) = sin x +cos x,x in [0, 2pi]` is (i) strictly increasing, (ii) strictly decreasing.

Description : Find the intervals in which the function `f(x) = sin x +cos x,x in [0, 2pi]` is (i) strictly increasing, (ii) strictly decreasing.

Last Answer : Find the intervals in which the function `f(x) = sin x +cos x,x in [0, 2pi]` is (i) strictly increasing, (ii) strictly decreasing.

The length of a rectangle is decreasing at a rate of 3 cm/sec and breadth is increasing at a rate of 4 cm/sec. Find the rate of change of its (a) peri

Description : The length of a rectangle is decreasing at a rate of 3 cm/sec and breadth is increasing at a rate of 4 cm/sec. Find the rate of change of its (a) peri

Last Answer : The length of a rectangle is decreasing at a rate of 3 cm/sec and breadth is increasing at a ... breadth of rectangle are 7 cm and 8 cm respectively.

(a) Find the intervals in which the function `f(x)=log(1+x)-x/(1+x)` is (i) increasing, (ii) decreasing function. (b) Find the intervals in which the

Description : (a) Find the intervals in which the function `f(x)=log(1+x)-x/(1+x)` is (i) increasing, (ii) decreasing function. (b) Find the intervals in which the

Last Answer : (a) Find the intervals in which the function `f(x)=log(1+x)-x/(1+x)` is (i) increasing, (ii) ... x/(log_(e) x),x gt 0` is increasing or decreasing.

Find the intervals in which the following functions are: (i) increasing (ii) decreasing. (a) `f(x) = 10-6x+x^(2)` (b) `f(x) = 2x^(2)-6x` (c) `f(x) = 2

Description : Find the intervals in which the following functions are: (i) increasing (ii) decreasing. (a) `f(x) = 10-6x+x^(2)` (b) `f(x) = 2x^(2)-6x` (c) `f(x) = 2

Last Answer : Find the intervals in which the following functions are: (i) increasing (ii) decreasing. (a) `f(x) = 10-6x+x^(2)` (b ... ) `f(x) = (x+2)^(3)(x-3)^(3)`

Excessive secretion of glucocorticoids raises blood glucose by (A) Decreasing glycogenesis (B) Increasing glycogenolysis (C) Increasing gluconeogenesis (D) Inhibiting HMP shunt

Description : Excessive secretion of glucocorticoids raises blood glucose by (A) Decreasing glycogenesis (B) Increasing glycogenolysis (C) Increasing gluconeogenesis (D) Inhibiting HMP shunt

Last Answer : Answer : C

Enzymes increases the rate of reactions by (A) Increasing the free energy of activation (B) Decreasing the energy of activation (C) Changing the equilibrium constant of the reaction (D) Increasing the free energy change of the reaction

Description : Enzymes increases the rate of reactions by (A) Increasing the free energy of activation (B) Decreasing the energy of activation (C) Changing the equilibrium constant of the reaction (D) Increasing the free energy change of the reaction

Last Answer : Answer : B

Enzymes increase the rates of reactions by (A) Increasing the free energy of activation (B) Decreasing the energy of activation (C) Changing the equilibrium constant of the reaction (D) Increasing the free energy change of the reaction

Description : Enzymes increase the rates of reactions by (A) Increasing the free energy of activation (B) Decreasing the energy of activation (C) Changing the equilibrium constant of the reaction (D) Increasing the free energy change of the reaction

Last Answer : Answer : B

Enzymes accelerate the rate of reactions by (A) Increasing the equilibrium constant of reactions (B) Increasing the energy of activation (C) Decreasing the energy of activation (D) Decreasing the free energy change of the reaction

Description : Enzymes accelerate the rate of reactions by (A) Increasing the equilibrium constant of reactions (B) Increasing the energy of activation (C) Decreasing the energy of activation (D) Decreasing the free energy change of the reaction

Last Answer : Answer : C

Organic nitrates relax vascular smooth muscle by (a) Increasing intracellular cyclic AMP (b) Increasing intracellular cyclic GMP (c) Decreasing intracellular cyclic AMP (d) Both (b) and (c)

Description : Organic nitrates relax vascular smooth muscle by (a) Increasing intracellular cyclic AMP (b) Increasing intracellular cyclic GMP (c) Decreasing intracellular cyclic AMP (d) Both (b) and (c)

Last Answer : Ans: B

The action of quinidine differs from that of digitalis in (a) Decreasing irritability of cardiac muscle (b) Preventing passage of impulses to the ventricle (c) Increasing irritability of heart muscle (d) Reducing conductivity (e) None of the above

Description : The action of quinidine differs from that of digitalis in (a) Decreasing irritability of cardiac muscle (b) Preventing passage of impulses to the ventricle (c) Increasing irritability of heart muscle (d) Reducing conductivity (e) None of the above

Last Answer : Ans: A

The critical spark energy required to ignite a given mixture A. decreases with decreasing sparking voltage B. increases with decreasing sparking voltage C. increases with increasing sparking voltage D. decreases with increasing sparking voltage

Description : The critical spark energy required to ignite a given mixture A. decreases with decreasing sparking voltage B. increases with decreasing sparking voltage C. increases with increasing sparking voltage D. decreases with increasing sparking voltage

Last Answer : ANSWER : D

Keeping other parameters constant brake power of diesel engine can be increased by (a) Decreasing the density of intake air (b) Increasing the temperature of intake air (c) Increasing the pressure of intake air (d) Decreasing the pressure of intake air

Description : Keeping other parameters constant brake power of diesel engine can be increased by (a) Decreasing the density of intake air (b) Increasing the temperature of intake air (c) Increasing the pressure of intake air (d) Decreasing the pressure of intake air

Last Answer : Ans : c

A ball tied with a string to a rotating shaft revolves at uniform speed. As the shaft is suddenly brought to rest, the string starts getting round the shaft with the angular velocity of the ball (a) increasing (b) decreasing (c) remaining constant (d) becoming zero

Description : A ball tied with a string to a rotating shaft revolves at uniform speed. As the shaft is suddenly brought to rest, the string starts getting round the shaft with the angular velocity of the ball (a) increasing (b) decreasing (c) remaining constant (d) becoming zero

Last Answer : Ans:(a)

Inflation can be checked by - (1) increasing exports (2) increasing money supply (3) increasing Government expenditure (4) decreasing money supply

Description : Inflation can be checked by - (1) increasing exports (2) increasing money supply (3) increasing Government expenditure (4) decreasing money supply

Last Answer : (4) decreasing money supply Explanation: The technical and most often used way to control inflation is by tightening the money supply. The logic goes that when people do not have excess money, ... . Most central banks use high interest rates as the traditional way to fight or prevent inflation.

If people's income of a country is denoted in a curved line space that it has increased, then what does it denote? (1) the income is increasing (2) the income is decreasing (3) dissimilarity is decreasing in income distribution (4) dissimilarity in income distribution is increasing

Description : If people's income of a country is denoted in a curved line space that it has increased, then what does it denote? (1) the income is increasing (2) the income is decreasing (3) dissimilarity is decreasing in income distribution (4) dissimilarity in income distribution is increasing

Last Answer : (3) dissimilarity is decreasing in income distribution Explanation: It shows inequality in income distribution. Inequality indices can also be derived directly from the Lorenz curve. Perhaps the most commonly- ... by the Lorenz curve and the perfect equality line to the total area below that line.

When marginal utility is zero, the total utility is - (1) Minimum (2) Increasing (3) Maximum (4) Decreasing

Description : When marginal utility is zero, the total utility is - (1) Minimum (2) Increasing (3) Maximum (4) Decreasing

Last Answer : (3) Maximum Explanation: Marginal utility measures the extra utility (or satisfaction) from consuming an additional unit of a product. Total utility is the total satisfaction from the consumption of the ... in total satisfaction from the consumption of that unit. So the total unit is at maximum.

Rotation of crops is essential (1) For increasing the quantity of minerals. (2) For decreasing the quantity of proteins. (3) For getting different kinds of crops. (4) For increasing fertility of the soil.

Description : Rotation of crops is essential (1) For increasing the quantity of minerals. (2) For decreasing the quantity of proteins. (3) For getting different kinds of crops. (4) For increasing fertility of the soil.

Last Answer : (4) For increasing fertility of the soil. Explanation: Crop rotation is the practice of growing a series of dissimilar/different types of crops in the same area in sequenced seasons. It gives ... the replenishment of nitrogen through the use of green manure in sequence with cereals and other crops.

Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : (1) pressure on the sand is decreased by increasing the area of the surface in contact Explanation: Camels have broad, flat, leathery pads with two toes on each foot. When the camel places its foot on ... the animal on loose sand in much the same way that a snowshoe helps a person walk on snow.

The magnifying power of an astronomical telescope can be decreased by – (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these

Description : The magnifying power of an astronomical telescope can be decreased by – (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these

Last Answer : (2) increasing the focal length of the eyepiece Explanation: The magnifying power (M) of astronomical is given by M = (focal length of objective)/(focal length of eye piece). This ... piece should be small. Similarly, for decreased magnification, focal length of eye piece should be increased.

During inter conversion of energy from one form to other forms, total energy at any time remains– (1) constant (2) zero (3) increasing (4) decreasing

Description : During inter conversion of energy from one form to other forms, total energy at any time remains– (1) constant (2) zero (3) increasing (4) decreasing

Last Answer : (1) constant Explanation: During interconversion of energy from one form to other forms, total energy at any time remains constant.

The magnifying power of an astronomical telescope can be decreased by – (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these

Description : The magnifying power of an astronomical telescope can be decreased by – (1) decreasing the focal length of the eyepiece (2) increasing the focal length of the eyepiece (3) increasing the focal length of the objective (4) None of these

Last Answer : (2) increasing the focal length of the eyepiece Explanation: The magnifying power (M) of astronomical is given by M = (focal length of objective)/(focal length of eye piece). This ... piece should be small. Similarly, for decreased magnification, focal length of eye piece should be increased.

An object covers distance which is directly proportional to the square of the time. Its acceleration is – (1) increasing (2) decreasing (3) zero (4) constant

Description : An object covers distance which is directly proportional to the square of the time. Its acceleration is – (1) increasing (2) decreasing (3) zero (4) constant

Last Answer : (4) constant Explanation: When an object covers distance which is directly proportional to the square of the time, its acceleration is constant. This is seen in the cases of falling objects. This connection between time and distance was first observed by Galileo.

Entropy of the universe is - (1) continuously increasing (2) continuously decreasing (3) zero (4) constant

Description : Entropy of the universe is - (1) continuously increasing (2) continuously decreasing (3) zero (4) constant

Last Answer : (1) continuously increasing Explanation: In an irreversible process, entropy always increases, so the change in entropy is positive. The total entropy of the universe is continually increasing.

Kilowatt load is divided between two AC generators operating in parallel by _____________. A. adjusting the governor controls B. varying the excitation voltage C. increasing both prime mover speeds simultaneously D. decreasing both prime mover speeds simultaneously

Description : Kilowatt load is divided between two AC generators operating in parallel by _____________. A. adjusting the governor controls B. varying the excitation voltage C. increasing both prime mover speeds simultaneously D. decreasing both prime mover speeds simultaneously

Last Answer : Answer: A

During size reduction by a jaw crusher, the energy consumed decreases with the (A) Decreasing size of product at constant size of feed (B) Decreasing machine capacity (C) Increasing size of feed at constant reduction ratio (D) None of these

Description : During size reduction by a jaw crusher, the energy consumed decreases with the (A) Decreasing size of product at constant size of feed (B) Decreasing machine capacity (C) Increasing size of feed at constant reduction ratio (D) None of these

Last Answer : (C) Increasing size of feed at constant reduction ratio

Give reason for the following observation (L-III) (a)- The tendency for catenation decreases down the group in group 14 (b)- The decreasing stability of+3 oxidation state with increasing atomic no. in group 13. (c)- Molten aluminum bromide is a poor conductor of electricity.

Description : Give reason for the following observation (L-III) (a)- The tendency for catenation decreases down the group in group 14 (b)- The decreasing stability of+3 oxidation state with increasing atomic no. in group 13. (c)- Molten aluminum bromide is a poor conductor of electricity.

Last Answer : Ans. -(a) it is due to decrease in bond dissociation energy which is due to increase in atomic size C-C > Si-Si >Ge-Ge>Sn-Sn>Pb-Pb. (b)- It is due to inert pair effect. (c)- Molten AlBr3 is poor conductor of electricity because it is covalent compound.

We are consuming a lot of electrical energy, solar energy etc Do you, therefore, conclude that energy of the universe is continuously decreasing? Explain. Which other thermodynamic quantity is continuously increasing or decreasing?

Description : We are consuming a lot of electrical energy, solar energy etc Do you, therefore, conclude that energy of the universe is continuously decreasing? Explain. Which other thermodynamic quantity is continuously increasing or decreasing?

Last Answer : Ans. No, energy of the universe remains constant (law of conservation of energy). Entropy of the universe is continuously increasing.

The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient(B) Increasing the liquid film co-efficient(C) Increasing the total pressure(D) Decreasing the total pressure

Description : The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient (B) Increasing the liquid film co-efficient (C) Increasing the total pressure (D) Decreasing the total pressure

Last Answer : (A) Increasing the gas film co-efficient

The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Description : The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Last Answer : (B) Increasing temperatures both on the surface and within the solid

Azeotropism for ethyl alcohol-water system disappears by (A) Increasing temperature (B) Decreasing pressure (C) Increasing pressure (D) No means

Description : Azeotropism for ethyl alcohol-water system disappears by (A) Increasing temperature (B) Decreasing pressure (C) Increasing pressure (D) No means

Last Answer : (B) Decreasing pressure

If there is no net force acting on body, then its acceleration is A. zero B. constant C. increasing D. decreasing

Description : If there is no net force acting on body, then its acceleration is A. zero B. constant C. increasing D. decreasing

Last Answer :  zero

Until a force acts on a body, it's velocity is A. zero B. constant C. increasing D. decreasing

Description : Until a force acts on a body, it's velocity is A. zero B. constant C. increasing D. decreasing

Last Answer :  constant

Total momentum within a closed system is A. increasing B. decreasing C. zero D. constant

Description : Total momentum within a closed system is A. increasing B. decreasing C. zero D. constant

Last Answer : constant

An object travelling with constant velocity has A. constant momentum B. zero momentum C. increasing momentum D. decreasing momentum

Description : An object travelling with constant velocity has A. constant momentum B. zero momentum C. increasing momentum D. decreasing momentum

Last Answer : constant momentum

Current entering and leaving a point in a circuit should be A. equal B. decreasing C. increasing D. variable

Description : Current entering and leaving a point in a circuit should be A. equal B. decreasing C. increasing D. variable

Last Answer : equal

If the slope of a graph is zero and so the displacement, then velocity is A. increasing B. decreasing C. constant D. zero

Description : If the slope of a graph is zero and so the displacement, then velocity is A. increasing B. decreasing C. constant D. zero

Last Answer : zero

Heat transfer co-efficient (h1 ) for liquids increases with (A) Increasing temperature (B) Decreasing temperature (C) Decreasing Reynolds number (D) None of these

Description : Heat transfer co-efficient (h1 ) for liquids increases with (A) Increasing temperature (B) Decreasing temperature (C) Decreasing Reynolds number (D) None of these

Last Answer : (A) Increasing temperature

The increasing vapor pressure caused by heating a liquid is due to------? A. increase inter-molecular interactions B. increasing potential energy of molecules C. increasing kinetic energy of molecules (Answer) D. decreasing surface tension

Description : The increasing vapor pressure caused by heating a liquid is due to------? A. increase inter-molecular interactions B. increasing potential energy of molecules C. increasing kinetic energy of molecules (Answer) D. decreasing surface tension

Last Answer : C. increasing kinetic energy of molecules (Answer)

Magnifying power of a simple microscope can be increased by ? A. increasing focal length of the lens B. Decreasing focal length of the lens (Answer) C. Lens of large aperture D. lens of short aperture E. None of these

Description : Magnifying power of a simple microscope can be increased by ? A. increasing focal length of the lens B. Decreasing focal length of the lens (Answer) C. Lens of large aperture D. lens of short aperture E. None of these

Last Answer : B. Decreasing focal length of the lens (Answer)

On scale of building, gravitational field is A. increasing B. decreasing C. uniform D. varying

Description : On scale of building, gravitational field is A. increasing B. decreasing C. uniform D. varying

Last Answer :  decreasing

Object is in equilibrium if resultant force acting on it is A. increasing B. decreasing C. zero D. becomes constant

Description : Object is in equilibrium if resultant force acting on it is A. increasing B. decreasing C. zero D. becomes constant

Last Answer : zero

Measured quality of a manufactured product is : 1. Always constant 2. Continually decreasing 3. Subject to a certain amount of variation 4. Continually increasing

Description : Measured quality of a manufactured product is : 1. Always constant  2. Continually decreasing  3. Subject to a certain amount of variation  4. Continually increasing

Last Answer : 3. Subject to a certain amount of variation

Walter’s Model suggests that a firm can always increase the value of the share by: A. Increasing dividend B. Decreasing dividend C. Constant Dividend D. None of the

Description : Walter’s Model suggests that a firm can always increase the value of the share by: A. Increasing dividend B. Decreasing dividend C. Constant Dividend D. None of the

Last Answer : D. None of the

The shock absorbing capacity of bolts can be increased by a) Increasing the shank diameter b) Decreasing the length of shank portion of bolt c) Increase the shank diameter and decreasing the length of shank d) None of the listed

Description : The shock absorbing capacity of bolts can be increased by a) Increasing the shank diameter b) Decreasing the length of shank portion of bolt c) Increase the shank diameter and decreasing the length of shank d) None of the listed

Last Answer : d) None of the listed