What vehicles use air cooled engines?

What vehicles use air cooled engines?
by

1 Answer

Answer :

Motorcycles and Aircrafts are two of the main vehicles that uses an air cooled engines. They use this feature since they normally have smaller engines then a normal moving vehicle.
by

Related questions

Give reason: Use of steam engines for transport vehicles is outdated today.

Description : Give reason: Use of steam engines for transport vehicles is outdated today.

Last Answer : Use of steam engines for transport vehicles is outdated today because they have low efficiency.

Diesel engines are best suited for heavy vehicles, such as lorries, trucks, railway engines and ships. Why?

Description : Diesel engines are best suited for heavy vehicles, such as lorries, trucks, railway engines and ships. Why?

Last Answer : As they have more power and efficiency of diesel engine is more.

Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater number of blades (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater ... (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Why aren't cars that are manufactured today air cooled?

Description : Why aren't cars that are manufactured today air cooled?

Last Answer : Air cooled, for larger engines would almost have to be a radial engine as opposed to an inline V-8 or V-6 wouldn’t it? Add. How many cylinders is your corvair?

I’m teary-eyed but never cry, silver-tongued, but never lie. double-winged, but never fly, air-cooled, but never dry. What am I? -Riddles

Description : I’m teary-eyed but never cry, silver-tongued, but never lie. double-winged, but never fly, air-cooled, but never dry. What am I? -Riddles

Last Answer : Mercury. The element looks shiny, silver, and is wet. The god Mercury has two wings but only uses them to run.

What would happen if the air inside a hot air balloon cooled down?

Description : What would happen if the air inside a hot air balloon cooled down?

Last Answer : What is the answer ?

What happen with the air in a soccer ball with a cooled?

Description : What happen with the air in a soccer ball with a cooled?

Last Answer : What is the answer ?

What happen with the air in a soccer ball with a cooled and heated?

Description : What happen with the air in a soccer ball with a cooled and heated?

Last Answer : The air pressure goes down when cooled, goes up when heated. Asoccer ball left outdoors in freezing weather does not have muchbounce. Left outside on a hot day, has a lot of bounce.

What happen with the air in a soccer ball with a cooled and heated?

Description : What happen with the air in a soccer ball with a cooled and heated?

Last Answer : The air pressure goes down when cooled, goes up when heated. Asoccer ball left outdoors in freezing weather does not have muchbounce. Left outside on a hot day, has a lot of bounce.

How does an air cooled chiller work?

Description : How does an air cooled chiller work?

Last Answer : The air cooling of a chiller signifies , the cooling of radiator. in a chiller the compressor compressors the gas which on expansion cools in side Copper tubes causing the chilling effect. The ... refrigerant is cooled by blowing air in air cooled chillers. There are also water cooled chillers.

What has to happen for Condensation to occur in nature air must be cooled to its dew point and there must be some kind of solid surface present true or false?

Description : What has to happen for Condensation to occur in nature air must be cooled to its dew point and there must be some kind of solid surface present true or false?

Last Answer : 1

What is the perfect condition for dehumidification of air? A. air is heated above its dew point temperature B. air is cooled up to its dew point temperature C. air is heated below its dew point temperature D. air is cooled below its dew point temperature

Description : What is the perfect condition for dehumidification of air? A. air is heated above its dew point temperature B. air is cooled up to its dew point temperature C. air is heated below its dew point temperature D. air is cooled below its dew point temperature

Last Answer : ANSWER : D

When the humidity ratio of air increases the air is said to be A. dehumidified B. humidified C. heated D. cooled

Description : When the humidity ratio of air increases the air is said to be A. dehumidified B. humidified C. heated D. cooled

Last Answer : ANSWER : B

Air can be cooled and dehumidified by A. circulating chilled water in tube across air flow B. placing evaporator coil across air flow C. spraying chilled water to air D. all of the mentioned

Description : Air can be cooled and dehumidified by A. circulating chilled water in tube across air flow B. placing evaporator coil across air flow C. spraying chilled water to air D. all of the mentioned

Last Answer : ANSWER : D

The power required to drive a turbo compressor for a given pressure ratio decreases when A. Air is heated at entry B. Air is cooled at entry C. Air is cooled at exit D. Air is heated at exit

Description : The power required to drive a turbo compressor for a given pressure ratio decreases when A. Air is heated at entry B. Air is cooled at entry C. Air is cooled at exit D. Air is heated at exit

Last Answer : ANSWER : B

The term "cooling range" in a cooling tower refers to the difference in the temperature of (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air(B) Hot water entering the tower and the wet bulb temperature of thesurrounding air(C) Hot water entering the tower and the cooled water leaving the tower(D) None of these

Description : The term "cooling range" in a cooling tower refers to the difference in the temperature of (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air (B) Hot water entering the ... air (C) Hot water entering the tower and the cooled water leaving the tower (D) None of these

Last Answer : (C) Hot water entering the tower and the cooled water leaving the tower

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Air initially at 101. 3 kPa and 40°C and with a relative humidity of 50%, is cooled at constant pressure to 30°C. The cooled air has a (A) Higher dew point (B) Higher absolute (specific) humidity (C) Higher relative humidity (D) Higher wet bulb temperature

Description : Air initially at 101. 3 kPa and 40°C and with a relative humidity of 50%, is cooled at constant pressure to 30°C. The cooled air has a (A) Higher dew point (B) Higher absolute (specific) humidity (C) Higher relative humidity (D) Higher wet bulb temperature

Last Answer : (C) Higher relative humidity

Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) Humidified with wet bulb temperature decreasingB) Humidified at constant wet bulb temperature(C) Dehumidified(D) None of these

Description : Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) ... temperature decreasing B) Humidified at constant wet bulb temperature (C) Dehumidified (D) None of these

Last Answer : (A) Humidified with wet bulb temperature decreasing

The term "approach" in a cooling tower refers to the difference in the temperature of the (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air (B) Hot water entering the tower and the wet bulb temperature of the surrounding air (C) Hot water entering and the cooled water leaving the cooling tower (D) None of these

Description : The term "approach" in a cooling tower refers to the difference in the temperature of the (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air (B ... (C) Hot water entering and the cooled water leaving the cooling tower (D) None of these

Last Answer : (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air

Unsaturated air (with dry bulb temperature and dew point being 35°C and 18°C respectively) is passed through a water spray chamber maintained at 15°C. The air will be cooled (A) And humidified (B) And dehumidified with increase in wet bulb temperature (C) At the same relative humidity (D) And dehumidified with decrease in wet bulb temperature

Description : Unsaturated air (with dry bulb temperature and dew point being 35°C and 18°C respectively) is passed through a water spray chamber maintained at 15°C. The air will be cooled (A) And ... (C) At the same relative humidity (D) And dehumidified with decrease in wet bulb temperature

Last Answer : (D) And dehumidified with decrease in wet bulb temperature

The temperature of water cooled in cooling tower is always __________ temperature of entering air. (A) More than the wet bulb (B) Less than the wet bulb (C) Equal to the wet bulb (D) Equal to the dry bulb

Description : The temperature of water cooled in cooling tower is always __________ temperature of entering air. (A) More than the wet bulb (B) Less than the wet bulb (C) Equal to the wet bulb (D) Equal to the dry bulb

Last Answer : (A) More than the wet bulb

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Unsaturated air (with dry and wet bulb temperatures being 35 and 25°C respectively) is passed through water spray chamber maintained at 35°C. The air will be (A) Cooled (B) Humidified (C) Both (A) & (B) (D) Dehumidified

Description : Unsaturated air (with dry and wet bulb temperatures being 35 and 25°C respectively) is passed through water spray chamber maintained at 35°C. The air will be (A) Cooled (B) Humidified (C) Both (A) & (B) (D) Dehumidified

Last Answer : (B) Humidified

Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction(B) Natural convection(C) Forced convection(D) None of these

Description : Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction (B) Natural convection (C) Forced convection (D) None of these

Last Answer : (B) Natural convection

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

A domestic refrigerator has a/an __________ cooled condenser. (A) Water (B) Air (C) Evaporative (D) Gas

Description : A domestic refrigerator has a/an __________ cooled condenser. (A) Water (B) Air (C) Evaporative (D) Gas

Last Answer : (B) Air

The minimum temperature to which the water can be cooled in a cooling tower is the __________ temperature of air. (A) Ambient (B) Dry bulb (C) Dew point (D) Wet bulb

Description : The minimum temperature to which the water can be cooled in a cooling tower is the __________ temperature of air. (A) Ambient (B) Dry bulb (C) Dew point (D) Wet bulb

Last Answer : C) Dew point

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Moist air is cooled along the line of constant __________ , when it is passed over a cold & dry cooling coil, such that no condensation occurs? (A) Enthalpy (B) Relative humidity (C) Wet bulb temperature (D) Dew point temperature

Description : Moist air is cooled along the line of constant __________ , when it is passed over a cold & dry cooling coil, such that no condensation occurs? (A) Enthalpy (B) Relative humidity (C) Wet bulb temperature (D) Dew point temperature

Last Answer : (D) Dew point temperature

Minimum temperature upto which water can be theoretically cooled down in the cooling tower by evaporative cooling is equal to the __________ temperature of air. (A) Wet bulb (B) Dry bulb (C) Saturation (D) Dew point

Description : Minimum temperature upto which water can be theoretically cooled down in the cooling tower by evaporative cooling is equal to the __________ temperature of air. (A) Wet bulb (B) Dry bulb (C) Saturation (D) Dew point

Last Answer : Option A

Air cooled engine is preferred in which condition? A. Cool condition C. Humid condition B. Hot zone. D. None of the above

Description : Air cooled engine is preferred in which condition? A. Cool condition C. Humid condition B. Hot zone. D. None of the above

Last Answer : Hot zone

Ten cu. ft of air at 300psia and 400°F is cooled to 140°F at constant volume. What is the transferred heat?  a.-120Btu  b. -220Btu  c.-320Btu  d. -420Btu formula: Q= mcv(T2-T1)

Description : Ten cu. ft of air at 300psia and 400°F is cooled to 140°F at constant volume. What is the transferred heat?  a.-120Btu  b. -220Btu  c.-320Btu  d. -420Btu formula: Q= mcv(T2-T1)

Last Answer : -420Btu

Ten cu ft. of air at 300 psia 400°F is cooled to 140°F at constant volume. What is the final pressure? (formula: p2 = p1T2/T1)  a. 0  b. 209 psia  c. - 420 psia  d. None of the above

Description : Ten cu ft. of air at 300 psia 400°F is cooled to 140°F at constant volume. What is the final pressure? (formula: p2 = p1T2/T1)  a. 0  b. 209 psia  c. - 420 psia  d. None of the above

Last Answer : 209 psia

_________ is the temperature to which the air must be cooled, at constant pressure, to produce saturation.  a. relative humidity  b. triple point temperature  c. dew point  d. critical point

Description : _________ is the temperature to which the air must be cooled, at constant pressure, to produce saturation.  a. relative humidity  b. triple point temperature  c. dew point  d. critical point

Last Answer : dew point

The door of a running refrigerator inside a room was left open. Which of the following statements is correct?  (a) The room will be cooled to the temperature inside the refrigerator.  (b) The room will be cooled very slightly.  (c) The room will be gradually warmed up.  (d) The temperature of the air in room will remain unaffected.  (e) any one of above is possible depending on the capacity.

Description : The door of a running refrigerator inside a room was left open. Which of the following statements is correct?  (a) The room will be cooled to the temperature inside the refrigerator.  (b) The room ... air in room will remain unaffected.  (e) any one of above is possible depending on the capacity.

Last Answer : Answer : c

For large power transformers, self oil cooled type or air blast type which of the following values of current density may be used ? (a) 1.0 to 1.2 A/mm2 (b) 1.5 to 2.0 A/mm2 (c) 2.2 to 3.2 A/mm2 (d) 3.2 to 4.2 A/mm2

Description : For large power transformers, self oil cooled type or air blast type which of the following values of current density may be used ? (a) 1.0 to 1.2 A/mm2 (b) 1.5 to 2.0 A/mm2 (c) 2.2 to 3.2 A/mm2 (d) 3.2 to 4.2 A/mm2

Last Answer : (c) 2.2 to 3.2 A/mm2

The noise produced by a ______ cooled machine is less as the rotor moves in a medium of smaller density. (a) air (b) hydrogen (c) either (a) or (b) (d) none of the above

Description : The noise produced by a ______ cooled machine is less as the rotor moves in a medium of smaller density. (a) air (b) hydrogen (c) either (a) or (b) (d) none of the above

Last Answer : (b) hydrogen

The knocking tendency in CI engines increases with (a) Increase of coolant water temperature (b) Increase of temperature of inlet air (c) Decrease of compression ratio (d) Increase of compression ratio

Description : The knocking tendency in CI engines increases with (a) Increase of coolant water temperature (b) Increase of temperature of inlet air (c) Decrease of compression ratio (d) Increase of compression ratio

Last Answer : Ans :c

In SI engines knocking can be reduced by (a) Increasing the compression ratio (b) Increasing the cooling water temperature (c) Retarding the spark advance (d) Increasing the inlet air temperature

Description : In SI engines knocking can be reduced by (a) Increasing the compression ratio (b) Increasing the cooling water temperature (c) Retarding the spark advance (d) Increasing the inlet air temperature

Last Answer : Ans :c

The air fuel ratio in petrol engines is controlled by a. valve opening / closing b. governing c. carburetion d. scavenging

Description : The air fuel ratio in petrol engines is controlled by a. valve opening / closing b. governing c. carburetion d. scavenging

Last Answer : ANSWER c. carburetion

Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Description : Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Last Answer : ANSWER d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Which of the following is normally not found in both the S.I. (petrol) & C.I. (diesel) engines? (A) Air filter (B) Fuel injector (C) Exhaust silencer (D) Battery

Description : Which of the following is normally not found in both the S.I. (petrol) & C.I. (diesel) engines? (A) Air filter (B) Fuel injector (C) Exhaust silencer (D) Battery

Last Answer : Option B

A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction of the engines for the supply of air (c) Two-cycle engines are not rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Description : A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction ... rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Last Answer : (a) The ambient atmospheric pressure is less at higher altitudes

Describe air fuel- ratio requirements for diesel engines at no load to full load.

Description : Describe air fuel- ratio requirements for diesel engines at no load to full load.

Last Answer : Irrespective of load at any given speed, an approximately constant supply of air enters the cylinder. With change in load, the quantity of fuel injected is changed varying the air fuel ratio. The ... engine always designed to operate with an excess air of 15 to 40% depending upon the application

Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Description : Differentiate air fuel ratio between carburetted engine and electronic fuel injection engines control system.

Last Answer : Sr. No. Carburetted engine Electronic Fuel Injection (EFI) engine 1 Fuel atomization depends upon velocity of air in the venturi. Atomization of fuel is independent of cranking ... occurs in carbureted engine. Equal quantity of fuel is supplied to port for each cylinder

Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons (b) permission to use only pure diesel with a maximum of 500 ppm sulphur as fuel for vehicles (c) use of non-polluting compressed natural gas (CNG) only as fuel by all buses and trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Description : Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and ... trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Last Answer : (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons

------------- is a feature that alerts a driver to an imminent crash and helps them use the maximum braking capacity of the car. a) AEB b) Air Bag c) Vehicles d) Electronic Stability control

Description : ------------- is a feature that alerts a driver to an imminent crash and helps them use the maximum braking capacity of the car. a) AEB b) Air Bag c) Vehicles d) Electronic Stability control

Last Answer : a) AEB

At what point do new vehicles usually need new air and fuel filters?

Description : At what point do new vehicles usually need new air and fuel filters?

Last Answer : answer:The air filter? Yes, no question. Instead of the factory disposable filter I would strongly suggest a modern high tech reusable filter. They provide more efficient airflow that results in improved economy and ... product in a near empty tank then fill up. I do this about three times a year.

Are there any vehicles that have cabin air ionizers or hepa filters?

Description : Are there any vehicles that have cabin air ionizers or hepa filters?

Last Answer : From what all I have seen no, there are no cars that actually have either of these built in. There appear to be a number of different models of these filters that can be bought a used in a car. ... they would be a fair drain on the car's battery, so you might want to take that into consideration.