Description : How does a threshing machine operate?
Last Answer : A threshing machine is used too seperate grains like wheat from the stalks.This was onc a proces that was done by hand and was more time consuming.
Description : How to repair a threshing machine?
Last Answer : The repair of a threshing machine can be very difficult depnding on the problem. It is best for safety that you have the machine repaired by a professional.
Description : It is a machine designed for harvesting ,threshing,separating, cleaning and collecting grains while moving through standing crops. a. Weeder b. thresher d. None of above
Last Answer : Ans- c. COMBINE
Description : machine is used for "Threshing , Harvesting , Separating , Cleaning and Collecting grains " a) Lathe b) Milling c) Combine d) Forklift
Last Answer : Combine
Description : machine designed for harvesting, threshing , cleaning and collecting grains while moving through standing crops. a) Combine b) Self operated VCR c) Power roller thresher d) Post harvesting technology
Description : It is a machine designed for harvesting, threshing, separating, cleaning and collecting grains while moving through standing crops a. Combine b. Thresher c. Harvestor d. all of the above
Last Answer : Ans:- a. Combine
Description : What do you understand by the following terms Threshing. -SST 10th
Last Answer : Threshing: Removing the grain from the stalk. Monoculture: Single crop year after year and all round the year.
Description : Threshing is done by -Science
Last Answer : Threshing is the process of loosening the edible part of grain (or other crop) from the straw to which it is attached. It is the step in grain preparation after reaping. Threshing does not remove the bran from the grain. Threshing may be done by beating the grain using a flail on a threshing floor.
Description : Which of the following not belong to Post harvest handling of seed crop? A. Seed Selection B. Threshing C. Drying D. Grading
Last Answer : A. Seed Selection
Description : A reaper is used for: (a) cutting crop (b) cutting and windrowing (c) cutting and threshing (d) Cutting grass
Last Answer : (a) cutting crop
Description : The Process of Removing Male Bud in Banana is technically called as? [a] Tipping [b] Disbudding [c] Threshing [d] Denavelling [e] All of the above
Last Answer : [e] All of the above
Description : Removal of male bud in banana is technically known as [a] Tipping [b] Disbudding [c] Threshing [d] Denavelling [e] All of the above
Description : In a thresher, by increasing the speed of threshing cylinder a) Threshing efficiency can be increased b) Broken grain loss can be minimized c) Un-threshed grains can be increased d) Straw breakup can be increased Ans. a
Last Answer : ans a
Description : Sickle is a simple manually operated tool. a. threshing b. Post harvesting d. None of above
Last Answer : Ans- c. Harvesting
Description : The operation of cutting, picking, plucking digging or any combination of these for removing the whole crop or edible part of the crop from either under the ground or above the ground is called a. threshing b. Post harvesting d. None of above
Description : To separate grains from the harvested crop and provide clean grain without much loss and damage which called as A) Potato digger elevator B) Groundnut digger shaker C) Reaper binder D) Threshing
Last Answer : Threshing
Description : Different parts of Thresher are A) Feeding device B) Threshing cylinder C) Concave D) All of the above.
Last Answer : All of the above.
Description : The Japanese type rotary thresher is used for threshing a) Paddy b) Wheat c) Sunflower d) Safflower
Last Answer : Paddy
Description : The threshing efficiency of thresher depends on a) Cylinder peripheral speed b) Cylinder concave clearance c) Feed rate, moisture content and type of crop d) All are correct
Last Answer : All are correct
Description : The takes place between the cylinder and concave units of the combine. a) Threshing b) Feeding drum c) Straw spreader d) Separating
Description : Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : d) 1100-1200rpm
Description : Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.
Last Answer : d.) Cutting and windrow.
Description : Most important factor affecting threshing efficiency a)peripheral speed of the drum b)cylinder concave clearance c)moisture content of crop d)feed rate
Last Answer : a)peripheral speed of the drum
Description : A threshing cylinder of 15cm radius is rotating at 700rpm if peripheral velocity (m/sec) will be a. 11 b.105 c. 210 d. 660
Last Answer : a. 11
Description : A reaper used for : a. Cutting crop b. Cutting and windrewing c. Cutting and threshing d. None of these
Last Answer : b. Cutting and windrewing
Description : The average threshing outrun of a paddy in kg/hr is (A) 500 (B)650 (C)800 (D)1000
Last Answer : (B)650
Description : Kinematic index of the straw Walker is as ratio (a) Angular velocity of straw Walker to angular velocity of threshing drum (b) Angular velocity of straw Walker to angular velocity of threshing drum (c) Angular velocity of straw Walker to linear velocity of combine (d) All of the above
Last Answer : (a) Angular velocity of straw Walker to angular velocity of threshing drum
Description : Increasing the cylinder speed result in (a) Increase threshing efficiency (b) Reduce cylinder loss (c) Increase seed damage (d) All of the above
Last Answer : (a) Increase threshing efficiency
Description : Differential lock offers advantage of E. Threshing efficiency of thresher (power operated) F. Capacity of chaff cutters G. Cleaning capacity of straw walkers H. None of the above
Last Answer : F. Capacity of chaff cutters
Description : Increasing the cylinder speed result in a) Increase threshing efficiency b) Reduce cylinder loss c) Increase seed damage d) All of the above
Last Answer : d) All of the above
Description : The process of separation of grains from cut crop after harvesting is known as ________. a) harvesting b)threshing c)winnowing d)sowing
Last Answer : b)threshing
Description : The cutting and gathering of crop after maturation is known as _______. a) harvesting b)threshing c)winnowing d)sowing
Last Answer : a) harvesting
Description : Anyone invented a time machine yet?
Last Answer : I gotch’er back, Uncle Rico ;)
Description : Is the fact that really bad things have happened proof that a time machine will never be invented?
Last Answer : A time machine is not necessary.
Description : In what year was the calculating machine invented ?
Last Answer : Calculating machine was invented in 1645 .
Description : Who invented the mountain climbing machine ?
Last Answer : : Vitaly Abalekov discovers mountaineering equipment.
Last Answer : Invented the movie machine (Thomas Alva Edison)
Last Answer : : Jacob Permkins invented the ice-making machine in 1830 (United States).
Last Answer : Invented the machine gun (James Pakal in 1818)
Last Answer : E. Cartwright, a British scientist, invented the loom in 1785
Last Answer : In 1862 , American scientist R. J. Gatling invented the machine gun
Last Answer : H. Elias invented the sewing mill.
Last Answer : Who discovered the sewing machine?
Last Answer : Gatning invents machine gun
Last Answer : Bless Pascal invented the calculating machine
Last Answer : He invented the yarn making machine 'Arkright'.
Last Answer : R. J. Gantling ------ 182 --- United States
Description : When was the telex machine invented?
Last Answer : Developed in Germany in 1926 and became operational in 1933.Spread throughout Europe after 1945 but declined as the Fax machinebecame popular in the 1980's
Description : Who invented the Turing machine and how heavy was it?
Last Answer : The Turing machine was "invented" by Alan Turing - around 1936. He later described his machine as:"...an unlimited memory capacity obtained in the form of an infinite tape marked out into squares, on ... - that is - there is no possible process that fits the description of Hilbert's 10th question.