What is that funny looking tool I saw my plumber use to tighten the pipe on my sink?

What is that funny looking tool I saw my plumber use to tighten the pipe on my sink?
by

1 Answer

Answer :

The tool you probably saw was a plumbers wrench. It uses and adjustable metal band to tighten pipes.
by

Related questions

How much should it cost to have a plumber unclog a bathroom sink?

Description : How much should it cost to have a plumber unclog a bathroom sink?

Last Answer : Did he try cleaning the trap? Sometimes all it takes is to unhook the trap and clean out the clog inside. I’ve unclogged multiple sinks that way (both kitchen and bathroom). I should add, I’m no handyman…

Q-How to fix the pipe under kitchen sink?

Description : Q-How to fix the pipe under kitchen sink?

Last Answer : It is very easy to work with PVC piping. You may have to make a trip to a hardware store if you have a broken pipe, buy the right size pipe, elbow and/or the right fitings you need. Try a cheap ... to work with PVC, do a web search or buy a homeowner's Plumbing howto book. I wish you the best!

Want to share something funny you heard, or saw, or thought of today?

Description : Want to share something funny you heard, or saw, or thought of today?

Last Answer : The people my fiance and I are staying with own 4 dogs, the oldest one has become increasingly attached to us so is always around. This is how she is currently sleeping. She does this all the time, it’s so weird :P

Last time you saw a movie so funny that your stomach started to hurt from laughing so much?

Description : Last time you saw a movie so funny that your stomach started to hurt from laughing so much?

Last Answer : I split a gut watching The Dictator. It was hard to catch my breath. Be sure not to confuse “aladeen”. Aladeen means yes, no, on, off, right, left, positive, negative.

I am looking for a used portable 3 compartment sink for use at a farmers market.?

Description : I am looking for a used portable 3 compartment sink for use at a farmers market.?

Last Answer : You can get a used one online at nextag.com. You won't find one in your area.

Instructions for the patient with low back pain include which of the following? a) When lifting, avoid overreaching. Instructions for the patient with low back pain should include that when lifting, the patient should avoid overreaching. The patient should also keep the load close to the body, bend the knees and tighten the abdominal muscles, use a wide base of support, and use a back brace to protect the back.

Description : Instructions for the patient with low back pain include which of the following? a) When lifting, avoid overreaching. Instructions for the patient with low back pain should include that when lifting, ... lifting, the patient with low back pain should bend the knees and tighten the abdominal muscles.

Last Answer : a) When lifting, avoid overreaching. Instructions for the patient with low back pain should include that when lifting, the patient should avoid overreaching. The patient should also keep the load close to the ... muscles, use a wide base of support, and use a back brace to protect the back.

How do you tighten or adjust the armrests of a 2011 Kia Sedona?

Description : How do you tighten or adjust the armrests of a 2011 Kia Sedona?

Last Answer : answer:(How does the dealer do it?) Just googling around I see references to 14mm bolt on the armrests of Kia Sedona captain's chairs. (Do you have captain's chairs?) That bolt is probably under a ... for the gentle bending), but first inspect the whole thing to verify that's what you're up against.

How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Description : How do I tighten mushroomed-out screws on my balisong (butterfly knife) ?

Last Answer : answer:Welcome to Fluther. I don't know about anyone else, but I have no idea what you're talking about. I don't know what a balisong is, in the first place, but even more important (to me ... helpful. We try to be helpful, but contrary to some expectations we cannot read minds as a general rule.

How do I tighten the ball head on my tripod?

Description : How do I tighten the ball head on my tripod?

Last Answer : That is exactly the same as mine. The lever on the side of the ball joint should tighten it and hold it in place. I wish I could have a closer look. Is it completely screwed down onto the base?

How do i tighten up loose skin after weight loss?

Description : How do i tighten up loose skin after weight loss?

Last Answer : If your skin hasn't conformed to your body on its own, the only other option with suitable results would be cosmetic surgery if it's that bad. I haven't seen you, so I don't know. ... effective since collagen is what keeps our skin taut) and stimulate your skin by massaging it often. Good luck!

Will my skin tighten up after I've lost weight?

Description : Will my skin tighten up after I've lost weight?

Last Answer : Best thing is to tighten up the muscles underneath and stay hydrated.

how to tighten the chain on a ten speed bike?

Description : how to tighten the chain on a ten speed bike?

Last Answer : the easiest thing to do is replace it. The chain is most likely stretched, a new one is 10–25 bucks and will make a world of difference

isnt there any way to tighten the ten speed chain?

Description : isnt there any way to tighten the ten speed chain?

Last Answer : Its about 10–25 bucks to buy one, they stretch and aren’t worth taking a link or 2 out.

what is the best way to tighten loose skin?

Description : what is the best way to tighten loose skin?

Last Answer : I believe that is that there is very little that can be done in those situations outside the realm of cosmetic surgery. My understanding is that many people who have experienced such drastic weight loss in effect get a tummy tuck to tighten everything up.

How can I tighten my bike chain?

Description : How can I tighten my bike chain?

Last Answer : a good resource is zinn and the art of road bike maintenance. i always have it near when i'm making any adjustments to my bike. i've never had to tighten my chain so i'm not sure how, but i ... i think it is relatively easy you might have to get a special chain tool at the bike store. good luck.

What does Tighten mean ?

Description : What does Tighten mean ?

Last Answer : Tighten or tighten.

How to tighten wheel bolts on a car?

Description : Should I tighten them a lot at fest? So that the bike won't break. Or do you tighten them with emotion?

Last Answer : Firmly but with feeling.

How to tighten a wheel on a car?

Description : Should I tighten it to the core? Or with feeling? Not to let me.

Last Answer : the torque wrench is really the best 90-110 Nm and it is without risk estimated that the 100 Nm per 25 cm hand lever so 40 kg (half body weight) but it depends more on the order (first upper, ... tighten it firmly, then lower the jack to the ground and only tighten fully on the ground (calmly step)

How do you tighten mimaki jv 300 encoder strip

Description : How do you tighten mimaki jv 300 encoder strip

Last Answer : Need Answer

How do I tighten up the steering on a 1997 Ford F-150?

Description : How do I tighten up the steering on a 1997 Ford F-150?

Last Answer : Inspect all the steering and suspension joints in the front endfor wear and play and replace any questionable parts you findfaulty. Then send the truck out for an alignment.

How can i tighten stomach skin after weight loss?

Description : How can i tighten stomach skin after weight loss?

Last Answer : This website http://www.fitday.com/fitness-articles/fitness/toning/5-belly-toning-exercises-to-tighten-skin-after-weight-loss.html gives you 5 belly toning exercises to tighten skin after weight loss.

How to Tighten Your Budget?

Description : How to Tighten Your Budget?

Last Answer : While not every budget adjustment is a crisis, there are plenty of times when it's necessary to know how to save money fast. Most people can handle even major adjustments if they know they are only for ... a few months, you should free up enough cash to make a more reasonable, long-term budget plan.

Allen key is used to tighten (A) Cap screw with hexagonal head (B) Cap screw with fillister head (C) Cap screw with hexagonal socket head (D) Cap screw with flat head

Description : Allen key is used to tighten (A) Cap screw with hexagonal head (B) Cap screw with fillister head (C) Cap screw with hexagonal socket head (D) Cap screw with flat head

Last Answer : (C) Cap screw with hexagonal socket head

Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to 1. tighten its control over distribution of its products 2. discourage competition from other manufacturers 3. incorporate selective distribution 4. contain costs 5. none of these

Description : The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to 1. tighten its control over distribution of its products 2. ... other manufacturers 3. incorporate selective distribution 4. contain costs 5. none of these

Last Answer : tighten its control over distribution of its products

How much torque would you apply to tighten the nut of brake assembly?

Description : How much torque would you apply to tighten the nut of brake assembly?

Last Answer : 150 ft.-lbs.

The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to A)tighten its control over distribution of its products. B)discourage competition from other manufacturers. C)incorporate selective distribution. D)contain costs.

Description : The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to A)tighten its control over distribution of its products. B)discourage competition from other manufacturers. C)incorporate selective distribution. D)contain costs.

Last Answer : A)tighten its control over distribution of its products.

If we tighten the strings of a musical instrument the pitch will be ________. a)higher b)lower c)constant d)none

Description : If we tighten the strings of a musical instrument the pitch will be ________. a)higher b)lower c)constant d)none

Last Answer : a)higher

How to Tighten a Motorcycle Chain

Description : How to Tighten a Motorcycle Chain

Last Answer : How to Tighten a Motorcycle Chain Occasionally tightening your motorcycle chain is an important part in motorcycle maintenance. Keep yourself safe and your motorcycle working in top condition using these steps. Read ... tool to have and be guided with when you need to do maintenance jobs like this.

How would a plumber use a spread sheet?

Description : How would a plumber use a spread sheet?

Last Answer : Spreadsheets are great for anything to do with numbers andstatistics. A plumber could be doing things with numbers, likecalculating how many jobs he has, costs of supplies he needs oramounts of supplies he ... data on jobs, like if he had to recordpressure in pipes and compare them to others.

If my septic take is backed up, should I use a chemical or call a plumber?

Description : If my septic take is backed up, should I use a chemical or call a plumber?

Last Answer : Some professionals say that you should not use drano when you have a septic tank. Always call a plumber when your septic tank is backed up. There's so many things that could go wrong and the expense would just get worse.

Should I call a plumber?

Description : Should I call a plumber?

Last Answer : What traits should you be looking for in a partner? The ones that are attractive to you of course, no one else can help you with that. I hope it works out fot you.

I'm a plumber in Scotland and i am struggling to find work!! Can any suggest what I do?

Description : I'm a plumber in Scotland and i am struggling to find work!! Can any suggest what I do?

Last Answer : answer:You could tamper with someone’s pipes the day after you go around passing out flyers. But you might get caught/charged with a crime if you do that. Make flyers listing contact information, and prices. Contact businesses and see if they could use a plumber.

Should I tip a plumber?

Description : Should I tip a plumber?

Last Answer : If you think the work was outstanding and the bill was/is within reason, I see no reason not to tip.

Who the heck is Joe, the plumber?

Description : Who the heck is Joe, the plumber?

Last Answer : I don’t know! But I’m sure sick of hearing about him. What about Jill, the hairdresser? Tom, the schoolteacher? Frank, the zookeeper? What about themmm?

Any plumber/home repair practitioners out there wanna tackle one?

Description : Any plumber/home repair practitioners out there wanna tackle one?

Last Answer : Go down to your local Home Depot or Lowe’s plumbing department and describe the problem to them. They will hook you up with the proper parts and describe how to install it. If you bat your eyes just right, they might even volunteer to do it for you after their shift is over.

Does anybody know of a great plumber in the New Haven Area?

Description : Does anybody know of a great plumber in the New Haven Area?

Last Answer : New Haven Connecticut? look in http://www.yellowpages.com for Aiello or RotoRooter. :) good luck

Why was the plumber so tired? -Riddles

Description : Why was the plumber so tired? -Riddles

Last Answer : He was drained.

HOW MUCH DO PUTNEY PLUMBER CHARGE PER HOUR?

Description : HOW MUCH DO PUTNEY PLUMBER CHARGE PER HOUR?

Last Answer : Plumbing is a service and not a product which means pricing will never be set in stone. You might often feel that you're overpaying for a plumber service but it's probably because you're not ... like to highlight factors that can affect the price of plumbing repairs.Call us to know 020 8877 3363

Who is a plumber?

Description : What does it do?

Last Answer : The one who works with the sheet metal. Makes roofing, building elements. Manufactures and installs gutters

Can a master licensed plumber work in Colorado?

Description : Can a master licensed plumber work in Colorado?

Last Answer : Need Answer

What is the pH level for liquid plumber?

Description : What is the pH level for liquid plumber?

Last Answer : Need answer

If central heating system cannot be installed as per the clients original specification what should a plumber do?

Description : If central heating system cannot be installed as per the clients original specification what should a plumber do?

Last Answer : advise their immeddiate supervisor or employer about the problem, obtain the clients verbal agreemenet to carry out the alterations, obtain the clients written agreement to carry out the alterations, proceed when the clients quantity surveoyor issues a variationorder

What company Steve working for the game plumber?

Description : What company Steve working for the game plumber?

Last Answer : Need answer

If central heating system cannot be installed as per the clients original specification what should a plumber do?

Description : If central heating system cannot be installed as per the clients original specification what should a plumber do?

Last Answer : advise their immeddiate supervisor or employer about the problem, obtain the clients verbal agreemenet to carry out the alterations, obtain the clients written agreement to carry out the alterations, proceed when the clients quantity surveoyor issues a variationorder

What licenses are required from the city and county to be a plumber in Denver?

Description : What licenses are required from the city and county to be a plumber in Denver?

Last Answer : In Denver you are required to have a Plumbing license and a contractors license. You can be heavily fined if you do not.

Do I need to contact a plumber if I'm having hot water heater problems?

Description : Do I need to contact a plumber if I'm having hot water heater problems?

Last Answer : Yes, a plumber would be able to help you with hot water heater problems. Hot water heaters have to do with water in your house and is a part of the Plumbing.

Do you need to go to school to become a plumber?

Description : Do you need to go to school to become a plumber?

Last Answer : Yes you do need to go to school to become a plumber. You do not need to go to college to be a plumber but you must have at least completed high school.

What do you need to have to get into plumber school?

Description : What do you need to have to get into plumber school?

Last Answer : You need a high school diploma or a GED to go to Plumbing school. You also need to like working with your hands.