How To Choose An Air Nailer For Your Home Shop Air Compressor?

How To Choose An Air Nailer For Your Home Shop Air Compressor?
by

1 Answer

Answer :

In today’s home shop equipment lineup, an air compressor hasbecome a vital addition. Along with an air compressor you will bean assortment of air power tools. One family of air power tools arethe very handy air driven nailers made in several different styles.Perhaps the two models that are of the most interest to the homeshop user are the brad nailer and the finish nailer.Both of these nailers are used for light duty fastening jobs.Although they look very similar in construction, they use differentfasteners and are used in slightly different applications.Finishing nailers use a heavier constructed fastener orfinishing nails. Finishing nails usually are made in either 15 gageor 16 gage. They are available in lengths from one to four inches.The finishing nailer is typically used to assemble
by
selected by

Related questions

What is a flooring nailer?

Description : What is a flooring nailer?

Last Answer : A flooring nailer is similar in appearance to a nailgun, but it is purposed exclusively for laying floors. This is a better option because it is less likely to damage your floor.

Two-value capacitor motor finds increased application as compressor motor in small home air-conditioners because?

Last Answer : Two-value capacitor motor finds increased application as compressor motor in small home air-conditioners because it has low starting as well as running currents at relatively high power factor.

How to choose a compressor?

Description : How to choose a compressor?

Last Answer : So, you or your company need a compressor. A compressor is called special equipment that is designed to clean and supply air, as well as other gases under pressure. Nowadays there ... all environmental conditions. Therefore, when choosing a compressor, do not forget to consult with professionals.

Our air conditioning compressor went out. The bedrooms are hot now.What is a decent air conditioning brand?

Description : Our air conditioning compressor went out. The bedrooms are hot now.What is a decent air conditioning brand?

Last Answer : Why not just replace the compressor on the unit you have right now?

Classification of air compressor

Description : Classification Of Air Compressor

Last Answer : Air compressors are classified in several different ways, depending on the specific characteristics and features of the compressor. Here are a few common ways that air compressors are classified: ... range of sizes and capacities, from small, portable units to large, industrial-sized compressors.

How to replace air conditioning compressor ford mondeo mk3 tddi diesel 2.0 85kw

Description : The approach is terrible.

Last Answer : Need Answer

how to fix my air compressor?

Description : how to fix my air compressor?

Last Answer : Need Answer

What Two factors must be considered when selecting a suitable site for new air compressor?

Description : What Two factors must be considered when selecting a suitable site for new air compressor?

Last Answer : Need answer

Do you pay sales tax to repair an air compressor in Texas?

Description : Do you pay sales tax to repair an air compressor in Texas?

Last Answer : What is the answer ?

What does a stage air compressor do?

Description : What does a stage air compressor do?

Last Answer : A stage air compressor is a heavy duty compressor that increases the amount of air is a tight, confined space. It uses two cylinders and two pistons; one piston pumps air from the first cylinder ... . You can find a picture and detailed diagram of a stage air compressor at www.ecompressedair.com.

Which person was the inventor of the gas air compressor?

Description : Which person was the inventor of the gas air compressor?

Last Answer : The 19th century British scientist and inventor Michael Faraday discovered that compressing and liquefying a certain gas could chill air when the liquefied.

where can i find a cheap porter cable air compressor?

Description : where can i find a cheap porter cable air compressor?

Last Answer : Cheap porter cable air compressor can be found online or at your local hardware store. They will carry a selection that will suit and fit your needs.

Where can I get a replacement motor for a 12v air compressor?

Description : Where can I get a replacement motor for a 12v air compressor?

Last Answer : That depends on the manufacturer. Check the unit for model numbers and check your owners manual for contact information. The manufacturer may have a website listed in the owners manual.

Storing your Air Compressor?

Description : Storing your Air Compressor?

Last Answer : To complete your ultimate garage workshop you purchased an air compressor to complete your power tool collection. But where do you put it? What kind of air compressor you have will determine where to place ... Because they aren't portable, these beasts need to be as close to a power outlet as possib

A reciprocating compressor is not suitable for use as a supercharger because: A. it runs at lower rpm B. the pressure ratio is high C. volumetric efficiency is high D. it is bulky and can handle small quantity of air

Description : A reciprocating compressor is not suitable for use as a supercharger because: A. it runs at lower rpm B. the pressure ratio is high C. volumetric efficiency is high D. it is bulky and can handle small quantity of air

Last Answer : ANSWER : D

The volume of air delivered by the compressor is called A. Free air delivery B. Compressor capacity C. Swept volume D. Mean effective pressure

Description : The volume of air delivered by the compressor is called A. Free air delivery B. Compressor capacity C. Swept volume D. Mean effective pressure

Last Answer : ANSWER : B

The maximum delivery pressure in a rotary air compressor is A. 10 bar B. 20 bar C. 30 bar D. 50 bar

Description : The maximum delivery pressure in a rotary air compressor is A. 10 bar B. 20 bar C. 30 bar D. 50 bar

Last Answer : ANSWER : A

In a single acting reciprocating compressor, the suction, compression and delivery of air takes place in A. One stroke B. Two stroke C. Three stroke D. Four stroke

Description : In a single acting reciprocating compressor, the suction, compression and delivery of air takes place in A. One stroke B. Two stroke C. Three stroke D. Four stroke

Last Answer : ANSWER : B

The clearance volume of the air compressor is kept minimum because A. It allows maximum compression to be achieved B. It greatly affects volumetric efficiency C. It results in minimum work D. It permits isothermal compression

Description : The clearance volume of the air compressor is kept minimum because A. It allows maximum compression to be achieved B. It greatly affects volumetric efficiency C. It results in minimum work D. It permits isothermal compression

Last Answer : ANSWER : B

The area of actual indicator diagram on an air compressor as compared to area of ideal indicator diagram is A. Less B. More C. Same D. Unpredictable

Description : The area of actual indicator diagram on an air compressor as compared to area of ideal indicator diagram is A. Less B. More C. Same D. Unpredictable

Last Answer : ANSWER : B

Volumetric efficiency of air compressor is of the order of A. 20% to 30 % B. 40% to 50% C. 60% to 70% D. 70% to 90%

Description : Volumetric efficiency of air compressor is of the order of A. 20% to 30 % B. 40% to 50% C. 60% to 70% D. 70% to 90%

Last Answer : ANSWER : D

In reciprocating air compressor the clearance ratio is given by A. B. C. D.

Description : In reciprocating air compressor the clearance ratio is given by A. B. C. D.

Last Answer : ANSWER : C

Work input to the air compressor with n as index of compression A. Increases with increase in value of n B. Decrease with increase in value of n C. remains same whatever the value of n D. first increase and then decreases with increase of value of n.

Description : Work input to the air compressor with n as index of compression A. Increases with increase in value of n B. Decrease with increase in value of n C. remains same whatever the value of n D. first increase and then decreases with increase of value of n.

Last Answer : ANSWER : A

Surging basically implies A. Unsteady, periodic and reversed flow B. Forward motion of air at a speed above sonic velocity C. The surging action due to the blast of air produced in a compressor D. Forward movement of aircraft

Description : Surging basically implies A. Unsteady, periodic and reversed flow B. Forward motion of air at a speed above sonic velocity C. The surging action due to the blast of air produced in a compressor D. Forward movement of aircraft

Last Answer : ANSWER : A

Which one of the following methods can be adopted to obtain isothermal compression in an air compressor? A. Increasing the weight of the compressor B. Inter-stage heating C. Atmospheric cooling D. Providing appropriate dimensions to the cylinder

Description : Which one of the following methods can be adopted to obtain isothermal compression in an air compressor? A. Increasing the weight of the compressor B. Inter-stage heating C. Atmospheric cooling D. Providing appropriate dimensions to the cylinder

Last Answer : ANSWER : A

In a two stage reciprocating air compressor with a suction pressure of 2 bar and delivery pressure of 8 bar the ideal intercooler pressure will be A. 10 bar B. 6 bar C. 4 bar D. 3 bar

Description : In a two stage reciprocating air compressor with a suction pressure of 2 bar and delivery pressure of 8 bar the ideal intercooler pressure will be A. 10 bar B. 6 bar C. 4 bar D. 3 bar

Last Answer : ANSWER : C

In a single stage reciprocating air compressor, the work done on air to compressor is from suction pressure to delivery pressure will be minimum when the compression is A. Isothermal process B. Adiabatic process C. Polytropic process D. Constant pressure process.

Description : In a single stage reciprocating air compressor, the work done on air to compressor is from suction pressure to delivery pressure will be minimum when the compression is A. Isothermal process B. Adiabatic process C. Polytropic process D. Constant pressure process.

Last Answer : ANSWER : A

Which one of the following statement is not correct for the volumetric efficiency of a reciprocating air compressor? A. It decreases with increase in ambient temperature B. It increases with decrease in pressure ratio C. It increases with decrease in clearance ratio D. It decreases with increases in delivery pressure

Description : Which one of the following statement is not correct for the volumetric efficiency of a reciprocating air compressor? A. It decreases with increase in ambient temperature B. It increases with ... It increases with decrease in clearance ratio D. It decreases with increases in delivery pressure

Last Answer : ANSWER : A

In a two stage reciprocating air compressor, the suction and delivery pressure are 1 and 4 bar respectively. For maximum efficiency the intercooler pressure is A. 1.5 bar B. 2 bar C. 2.5 bar D. 3 bar

Description : In a two stage reciprocating air compressor, the suction and delivery pressure are 1 and 4 bar respectively. For maximum efficiency the intercooler pressure is A. 1.5 bar B. 2 bar C. 2.5 bar D. 3 bar

Last Answer : ANSWER : B

Which one of the following statements are correct for reciprocating air compressor? A. Its volumetric efficiency increases with increasing clearance ratio B. Its volumetric efficiency increases with pressure ratio C. Its volumetric efficiency does not vary with change in clearance ratio and pressure ratio D. Its volumetric efficiency decreases with increasing clearance ratio and pressure ratio

Description : Which one of the following statements are correct for reciprocating air compressor? A. Its volumetric efficiency increases with increasing clearance ratio B. Its volumetric efficiency increases ... ratio D. Its volumetric efficiency decreases with increasing clearance ratio and pressure ratio

Last Answer : ANSWER : D

The power required to drive a turbo compressor for a given pressure ratio decreases when A. Air is heated at entry B. Air is cooled at entry C. Air is cooled at exit D. Air is heated at exit

Description : The power required to drive a turbo compressor for a given pressure ratio decreases when A. Air is heated at entry B. Air is cooled at entry C. Air is cooled at exit D. Air is heated at exit

Last Answer : ANSWER : B

In a reciprocating air compressor the compressor work per kg of air A. Increases as clearance volume increases B. Decreases as clearance volume increases C. Is independent of clearance volume D. Increases with clearance volume only of multistage compressor

Description : In a reciprocating air compressor the compressor work per kg of air A. Increases as clearance volume increases B. Decreases as clearance volume increases C. Is independent of clearance volume D. Increases with clearance volume only of multistage compressor

Last Answer : ANSWER : C

Why the work per kg of air flow in axial flow compressor is less compared to centrifugal compressor for same pressure ratio ?

Description : Why the work per kg of air flow in axial flow compressor is less compared to centrifugal compressor for same pressure ratio ?

Last Answer : Isentropic efficiency of axial flow compressor is higher.

Interstage coolers are provided in a multistage compressor to (A) Save power in compressing a given volume to a given pressure (B) Cool the delivered air (C) Achieve the exact delivery pressure (D) None of these

Description : Interstage coolers are provided in a multistage compressor to (A) Save power in compressing a given volume to a given pressure (B) Cool the delivered air (C) Achieve the exact delivery pressure (D) None of these

Last Answer : (A) Save power in compressing a given volume to a given pressure

Which of the following processes cannot be made reversible even under ideal condition of operation? (A) Free expansion of a gas (B) Compression of air in a compressor (C) Expansion of steam in a turbine (D) All (A), (B) & (C)

Description : Which of the following processes cannot be made reversible even under ideal condition of operation? (A) Free expansion of a gas (B) Compression of air in a compressor (C) Expansion of steam in a turbine (D) All (A), (B) & (C)

Last Answer : (A) Free expansion of a gas

Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Description : Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Last Answer : A) 300 × (32/7)

Which is an example of closed system? (A) Air compressor (B) Liquid cooling system of an automobile (C) Boiler (D) None of these

Description : Which is an example of closed system? (A) Air compressor (B) Liquid cooling system of an automobile (C) Boiler (D) None of these

Last Answer : (B) Liquid cooling system of an automobile

Air intake for an air compressor should be preferably taken from (A) A site, where cooling towers are located nearby (B) A site, where open coal yard in located nearby (C) An air conditioned room maintained at a temperature of 18°C (D) An outside atmosphere at 10°C

Description : Air intake for an air compressor should be preferably taken from (A) A site, where cooling towers are located nearby (B) A site, where open coal yard in located nearby (C) An air conditioned room maintained at a temperature of 18°C (D) An outside atmosphere at 10°C

Last Answer : (D) An outside atmosphere at 10°C

Capacity & power requirement for an air compressor working at high altitude compared to sea-level will be (A) More (B) Less (C) Same (D) Either more or less; depends on the climatic conditions

Description : Capacity & power requirement for an air compressor working at high altitude compared to sea-level will be (A) More (B) Less (C) Same (D) Either more or less; depends on the climatic conditions

Last Answer : (B) Less

With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Description : With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Last Answer : Option A

What Is A Rotary Air Compressor?

Description : What Is A Rotary Air Compressor?

Last Answer : A rotary-screw compressor is a type of gas compressor that uses a rotary-type positivedisplacement mechanism. They are commonly used to replace piston compressors where large volumes of high- ... either for large industrial applications or to operate high-power air tools such as jackhammers.

Why Doesn't My Air Compressor Produce As Much Air As It Used To?

Description : Why Doesn't My Air Compressor Produce As Much Air As It Used To?

Last Answer : The most common cause is bad valves. It is also important to check your entire system for higher air consumption or leaks.

Why Does My Compressor Leak Air When The Compressor Shuts Off?

Description : Why Does My Compressor Leak Air When The Compressor Shuts Off?

Last Answer : Most air compressors have a one way check valve between the compressor pump and the air receiver. When the compressor shuts off the check valve prevents the high pressure air from traveling back ... more common types are pressure switch mounted or centrifugal mounted on the end of the crankshaft.

Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?

Description : Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?

Last Answer : It depends on whether or not you have a continuous duty air compressor or not. A continuous duty compressor means that it is able to run for long periods of time (aka continuously). This type of ... that you give it time to cool off when filling the tank, otherwise you would be going overboard.

How Much Air Will I Need To Power My Air Compressor Tool?

Description : How Much Air Will I Need To Power My Air Compressor Tool?

Last Answer : Generally, most air tools will take around 70-100 PSI, and will consume less than 10 CFM, however consult the manual or manufacturer of your tool for exact air requirements.

Thermo-compressor is commonly used for a) compressing hot air b) flash steam recovery c) distillation d) reverse compression of CO2

Description : Thermo-compressor is commonly used for a) compressing hot air b) flash steam recovery c) distillation d) reverse compression of CO2

Last Answer : flash steam recovery

Air preheater is not used as a waste heat recovery system in a____. a) Boiler b) billet Reheating Furnace c) Heat treatment furnace d) compressor

Description : Air preheater is not used as a waste heat recovery system in a____. a) Boiler b) billet Reheating Furnace c) Heat treatment furnace d) compressor

Last Answer : compressor

What is the maximum allowable source pressure that can be used with the compressor air/nitrogen heating tool?

Description : What is the maximum allowable source pressure that can be used with the compressor air/nitrogen heating tool?

Last Answer : 200 psig.

How does the air compressor start and stop automatically?

Description : How does the air compressor start and stop automatically?

Last Answer : The air reservoir has pressure switch which is set for cut-off and cut-in depending on the pressure desired. When the pressure drops below the cut-in setting, the switch energises the contactor ... its closed contact in series with the power circuit to contactor and cuts supply to the contactor.

Why is an air compressor started unloaded?

Description : Why is an air compressor started unloaded?

Last Answer : The air pressure inside the compressor cylinder offers resistance to the movement of the piston. Hence started unloaded. Ask 4/E or 2/E in ship.